DOWNLOAD Sharp DV-HR300H (serv.man22) Service Manual ↓ Size: 2.36 MB | Pages: 45 in PDF or view online for FREE

• The following messages appear on the TV screen in case the disc you tried to playback is not appropriate or

the operation is not correct.

CANNOT PLAY BACK THIS DISC.

THIS IS A NON-STANDARD DISC.

REGION CODE OF DISC IS WRONG.

DISC IS NOT INSERTED.

CANNOT OPERATE THIS FUNCTION.

DISC IS PROTECTED.

COULD NOT REPAIR THE DISC.

COULD NOT FINALIZE.

THIS VIDEO IS COPY PROTECTED.
RECORDING IS NOT POSSIBLE.

CANNOT RECORD MORE.

CANNOT RECORD ON THIS DISC.

NO TAPE INSERTED IN DV
CAMCORDER.

CONNECTING TO DV CAMCORDER.

COULD NOT INITIALIZE.

DISC IS FULL.
CANNOT RECORD OR STORE.

THIS VIDEO CANNOT BE RECORDED
TO THIS DISC.

CAN’T DETECT CAMCORDER.

SET THE DATE AND TIME.

• The disc cannot be played back with

this Recorder.

• If you load a disc which cannot be

played with this Recorder (i.e. a
scratched disc), or if you load a disc
upside down, this message will
appear, and the disc tray will
automatically pop out.

• Occurs if you load a DVD disc whose

region number is not “ALL” or whose
region number does not contain “2”.

• Occurs if no disc is loaded in the disc

tray.

• Occurs if operation is incorrect.

• Occurs if you attempt to record or edit

a disc for which disc protection is set.

• Occurs if you attempt DV input of

video which cannot be recorded, and
attempt to record to a DVD.

• If there is a power failure during DVD

recording, the system automatically
tries to recover data after power is
restored. This error occurs if such
recovery is impossible.

• Occurs if the disc is scratched or

dirty, etc.

• Occurs if video with a copy guard

signal is input.

• Occurs if a title or chapter mark

exceeds the recordable upper limit.

• Number of titles: HDD 199/DVD 99.

Number of chapters: HDD 999/

DVD 999

• Occurs if you load a disc which cannot

be recorded to with this Recorder, or a
disc which is scratched or dirty.

• Occurs if you attempt operation when a

tape has not been loaded in the digital
camcorder linked via DV connection.

• Occurs if the digital camcorder power

goes off or the cable is pulled out
while connecting to DV.

• Occurs if connection with the digital

camcorder is broken.

• Occurs if the disc is scratched or

dirty, etc.

• Occurs if there is no empty space in

the disc.

• Occurs if you try to record a “Copy

Once” broadcast onto a disc which is
not compatible with CPRM.

• Occurs if you set to DV input without

connecting a digital camcorder.

• Occurs if multiple digital camcorders

are connected.

• Occurs if timer programming is done

when the Recorder clock has not
been set.

• Check the disc, and load it correctly.

• Cancel disc protection, or reload a

recordable disc.

• Check the disc, and load it correctly.

• Cannot record.

• Erase unnecessary titles.
• Either erase unnecessary chapters, or

combine chapters.

• Reload an appropriate recording

disc.

• Load a tape into the digital

camcorder.

• Check the power of digital camcorder

or cable connection.

• System is performing reconnection

processing. Wait about 30 seconds.

• Check the disc, and load it correctly.

• Load a disc with empty space.
• Erase unnecessary titles.

• Load a CPRM compatible disc (DVD-

RW Ver. 1.1 or higher) initialized in VR
mode.

• Connect a digital camcorder, and

reset again to DV input.

• Set the clock and perform timer

programming again.

Continued on Next Page |||

DV-HR300H-101-111

04.1.16, 4:39 PM

104

RECORDING WAS STOPPED DUE TO
FULL DISC.

REPAIRING THE DISC.

THIS IS A NON-STANDARD DISC.
REMOVE IT.

THIS VIDEO CANNOT BE RECORDED
TO THIS DISC.
TIMER RECORDING COULD NOT
START.

LIVE BROADCAST RECORDING
PROHIBITED.
RECORDING STOPPED.

THIS VIDEO IS COPY PROTECTED.
RECORDING IS NOT POSSIBLE.

CANNOT OPERATE DUE TO HDD
ERROR.
CAN VIEW LIVE BROADCASTS ONLY.
CONTACT THE NEAREST SERVICE
CENTRE APPROVED BY SHARP.

SYSTEM ERROR.
POWER IS OFF.

CHECKING HARD DISC.
CAN ONLY VIEW LIVE BROADCAST
UNTIL CONFIRMATION IS OVER.

THIS PROGRAM COPY IS PRO-
TECTED.
CANNOT VIEW TIME SHIFT.

• Occurs when empty space in the

disc runs out.

• Occurs when recording stops

before disc information has been
correctly written onto a DVD, due to
a problem like a power failure.

• Occurs if the loaded disc cannot be

recorded to or played because it is
a non-standard or scratched, etc.

• Occurs if you try to record “Copy

Once” video onto DVD-R or non-
CPRM compatible DVD-RW.

• Occurs if a programme begins

during recording, and recording of
the broadcast itself is forbidden due
to copyright protection.

• Occurs if you attempt to record a

programme, and recording of the
broadcast itself is forbidden due to
copyright protection.

• Occurs when there is a problem

with the HDD, and when you
perform an operation which
requires HDD operation, like special
playback or recording.

• If a problem occurs with the HDD

while power is “ON”, power is shut
off automatically.

• Occurs if there is a power failure, or

the power cord is unplugged and
plugged in again while power is
“ON”.

• Occurs if time shift viewing is

impossible because recording of
the broadcast itself is forbidden by
copyright protection.

• Wait until DVD disc recovery is

finished.

• Remove the disc.

• Record on CPRM compatible DVD-

RW disc in VR mode.

• Initialize the HDD once. If initializa-

tion does not solve the problem,
please contact the nearest service
centre approved by Sharp as soon
as possible.

• It may take 1-2 minutes to check the

HDD. During this time, you can only
watch live broadcasts. Wait a while
until the check is over.

• You can only view live broadcasts.

CANNOT OPERATE DUE TO THE
CONDITION OF HARD DISC.

HARD DISC IS NOT READY YET.
CANNOT OPERATE.

• Occurs if you perform operation like

special playback when there is
problem with the HDD.

• Occurs if you perform operation

requiring operation of the HDD (like
special playback or recording)
during HDD preparation.

• The HDD must be repaired, so

contact the nearest service centre
approved by Sharp as soon as
possible.

• You can only view live broadcasts

until preparation is finished. Wait a
while until operation is enabled. (If
you use the Recorder at a cold
location and the HDD temperature
is low, HDD preparation may take
some time.)

CANNOT SELECT MORE.

• Occurs if you attempt to select 6

titles (chapters) at the screen for
selecting titles or chapters to be
dubbed.

• Dub 5 titles (or chapters) at a time.

DV-HR300H-101-111

04.1.16, 4:39 PM

105

CANNOT HIGH SPEED DUB THIS
TITLE.

TITLE PROTECTION IS SET.
CANCEL TITLE PROTECTION
BEFORE DUBBING.

CANNOT DUB TO DISC DUE TO
COPY PROTECTED PROGRAM.

CANNOT DUB TO THE DISC.

CANNOT DUB FROM THE DISC.

COPY PROTECTED PROGRAM WILL
BE MOVED.

• Occurs if you attempt high-speed

dubbing onto DVD in Video mode of
a title for which “High Speed
Dubbing Priority” has not been set,
or if you attempt high speed
dubbing of a title edited in frame
units on the HDD.

• Occurs when you attempt to dub a

title containing a “Copy Once” part
for which title protection has been
set.

• Occurs if you attempt to dub a title

containing a “Copy Once” part to
DVD-R or a non-CPRM compatible
DVD-RW.

• Occurs if an unrecordable disc is

loaded (i.e. when the maximum
number of titles or chapters is
exceeded, when the disc is
protected, when the disc is
scratched or dirty, or when the disc
is a ROM disc).

• Occurs when a disc other than a

DVD-RW/R is loaded.

• Occurs if you attempt to dub a title

containing a “Copy Once” part.

• Perform “Rate Conversion Dub-

bing”.

• If a title contains a “Copy Once”

part, you can only move the
original. If title protection is set for a
title, you cannot move it, so perform
dubbing (movement) after cancel-
ling title protection.

• Dub in VR mode to a CPRM-

compatible DVD-RW.

• Replace with a recordable disc.

• Dub from a DVD-RW/R disc.

• Be careful because the dubbing

source video is erased after
dubbing.

CANNOT SELECT MORE.

CANNOT SET THIS POSITION.

CHAPTER IS FULL. CANNOT
OPERATE THIS FUNCTION.

CANNOT COMBINE THESE CHAP-
TERS.

• Occurs if you attempt to select

more than 20 titles (chapters) when
you perform Erase Selected Title.

• Occurs if you attempt to designate

a range shorter than 3 seconds and
edit.

• Occurs if the editing result exceeds

the upper limit of total number of
chapters (999).

• Occurs if you attempt to combine

chapters which cannot be com-
bined. (Chapters created when you
erase a scene or chapter in a single
title cannot be erased).

• Erase a maximum of 20 titles

(chapters) at a time.

• Designate a range of 3 seconds or

more. (If you designate a range of 3
seconds or more, you can
designate in frame units.)

• Edit after erasing unnecessary

chapter marks by combining
chapters.

DV-HR300H-101-111

04.1.16, 4:39 PM

106

If you set to Exact Recording but the timer recording programme will not fit into a single
DVD-RW/R, the Recorder will automatically perform Alternate Recording to HDD.
The Recorder will also perform Alternate Recording to HDD if you forget to load a DVD-
RW/R.

Recorded onto some DVD discs are scenes which have been simultaneously shot from
a number of different angles (the same scene is shot from the front, from the left side,
from the right side, etc.). With such discs, you can select the angle on Function Control
Screen to view the scene from different angles.

These numbers are recorded on DVD discs. A title is subdivided into many sections,
each of which is numbered, and specific parts of video presentations can be searched
quickly using these numbers.

This function lets you playback and view a programme while it is being recorded onto
HDD.

This function prevents copying. You cannot record software or broadcast programmes
marked by the copyright holder with a signal which limits copying.

Corrects for gradations in dark areas of images to make images clearer.

Enhances the fine detail of the image and outlines of the objects it contains.

This lets you select things like the subtitle language or overdub audio using a menu
stored on the DVD video disc.

A sound system developed by Dolby Laboratories Inc. that gives movie theatre ambi-
ence to audio output when the product is connected to a Dolby Digital processor or
amplifier.

Setting that increases the average volume of Dolby Digital audio when playing a DVD.

This lets you enjoy Surround audio via analogue connection with a stereo (2ch) TV or
audio equipment.

This is a digital sound system developed by Digital Theater Systems for use in cinemas.
This system uses 6 audio channels and provides accurate sound field positioning and
realistic acoustics. (By connecting a DTS Digital Surround decoder, you can also listen
to DTS Digital Surround sound.)

This function is used when dubbing from HDD to DVD. It automatically selects the
recording mode according to the recording time of the title so that the recording will fit
into a single disc.

This function automatically changes the recording mode to prevent recordings from
running out before they are finished due to a lack of available DVD disc space by
comparing the available disc space and the time required for the timer recording.

DV-HR300H-101-111

04.1.16, 4:39 PM

107