DOWNLOAD Sharp DV-HR300H (serv.man22) Service Manual ↓ Size: 2.36 MB | Pages: 45 in PDF or view online for FREE

Example : Setting “NICAM” under “MODE
SETTING”

Press ' / " / \ / | to select
“OTHER SETTINGS 2”, then press
SET/ENTER.

Press ' / "  to select “MODE
SETTING”, then press SET/
ENTER to confirm.

• The MODE menu is displayed with

NICAM selected.

  N I C AM

L 1

OU T

L 2

I N

 

 

 

 

  : S E L E C T

A U T O

Y / C
Y / C

 

  
 
  
 

: R E T URN

: CH A NGE  

: E N T E R

➞

Press\ / | to select “OFF”.

This recorder can receive and record NICAM
or A2 broadcasts. NICAM broadcasts will be
received when “AUTO” is selected in the
NICAM setting. Depending on the received
programme, some NICAM or A2 broadcasts
may not be in stereo.

The monitor output listed in the table shows
the audio output mode. The contents of audio
recording are different between VR mode and
Video mode. See the tables below for details.

Broadcast

NICAM/A2
STEREO

NICAM/A2
BILINGUAL

NICAM/A2
MONO

STEREO

BILINGUAL
L
BILINGUAL
R
STEREO

BILINGUAL
L
BILINGUAL
R
STEREO

BILINGUAL
L
BILINGUAL
R

L

L

L

R

R

R

L

L

L

R

R

R

L

L

L

R

R

R

L

L

R

R

L

R

L

VR MODE

VIDEO MODE

R

L

R

MONO

MONO

MONO

MONO

MONO

MONO

MONO

MONO

MONO

MONO

MONO

MONO

EXTERNAL AUDIO

VIDEO MODE AUDIO

RECORDING AUDIO

· When making a PCM recording of bilingual sound, only 

the audio selected in “VIDEO MODE AUDIO” is 
recorded.

· When recording audio in the PCM format with the 

recording mode set to “FINE” or “MN32”, audio is 
recorded in the same format as recorded to DVD-RW/R 
disc in Video mode.

· When a disc recorded in monaural audio is playback, 

monaural audio is played back even though “STEREO” 
is displayed on the screen.

Broadcast

NICAM
STEREO

NICAM
BILINGUAL

NICAM
MONO
STEREO
(Except
NICAM)

BILINGUAL
(Except
NICAM)

MONO
(Except
NICAM)

MONO

L R

L R

L

R

MONO

MONO

L R

L R

L

R

MONO

NICAM
STEREO
NICAM
STEREO
NICAM
I/II
NICAM
I/II
NICAM
I/II

NICAM

STEREO

STEREO

I/II

I/II

I/II

–

–

L R

L R

L

R

–

–

L R

L R

L

R

–

L+R

L

L

L+R

R

R

L

R

MONO

L+R

R

R

L

R

MONO

L

R

MONO

L+R

L

L

L

R

MONO

Audio

Output

L

R

Audio Mode*

Displayed
on screen

Display of

Broadcast

Received

Display of

Audio

Received

* Audio mode is selected with the AUDIO button on the 

remote control.

DV-HR300H-089-100

04.1.19, 1:06 PM

96

• This lets you preset the channels into memory. A maximum of 84 channels can be

preset.

• For details, see “Channel Setting” on page 28.

• This lets you obtain sharp colour picture.

• If there have a separate decoder connected to the L2 terminal of the Recorder, set this

function to “ON” in order to record the unscrambled signal and/or watch it on your TV.

• This determines whether the channel can be selected when using CH '

'

'

'

' / "

"

"

"

"  instead of

Number buttons.

1 - 84

ON
OFF

CHXX

ON
OFF

• When your Recorder tunes in broadcast channels automatically, it sorts them into a

standard order using internal information. The “MOVE” function lets you change the
order of the channel.

• This lets you delete a channel from the Recorder memory.

• When your Recorder tunes in broadcast channels automatically, it names them using

the VPS/PDC information. The “NAME” function lets you change the name of the
channel.

*

1

  For details, see page 28.

*

2

  For details, see pages 28, 29.

DV-HR300H-089-100

04.1.19, 1:06 PM

97

• The clock will normally be set using the VPS/PDC information when your Recorder

automatically tunes in the broadcast channels. If for any reason the VPS/PDC signals
are not present, your Recorder will not be able to set the clock. The “CLOCK” function
lets you set the clock manually.

TIME:XX:XX(24H)
DATE:Day/Month
YEAR:XX
ADJUST:
 

∗:AUTO/-:OFF

• This function should allow the Police to identify you as the owner of the Recorder if it is

stolen. Each time the Recorder is turned on, your postcode will be displayed for 5
seconds. Your postcode cannot be changed or removed without first entering the
correct PIN - number.

0000–9999

*

3

  For details, see page 27.

*

4

  For details, see page 30.

DV-HR300H-089-100

04.1.16, 4:32 PM

98

• When recording with a DVD-RW in VR mode, initialize in VR mode

before you start recording.
(When you initialize, all of the recorded content of the disc is erased.
Before initializing, check the content of the disc so that you do not
erase any content you need.)

• You cannot initialize if “DVD DISC PROTECTION” is set to

“PROTECT”. (page 93)

• When recording with a DVD-RW disc in Video mode, initialize in Video

mode before you start recording.
(When you initialize, all of the recorded content of the disc is erased.
Before initializing, check the content of the disc so that you do not
erase any content you need.)

• You cannot erase with DVD-R disc.

• This sets the Recorder so it automatically initializes any unused DVD-

RW discs which are loaded into the Recorder.
You can initialize in either VR mode or Video mode.

• If an HDD error message is displayed, or if you wish to return the HDD

to the state it was in when the Recorder was purchased, initialize the
HDD. All recorded video will be erased. (If you use the “ERASE ALL
TITLES” function to erase the titles, protected titles will remain, but if
you use the HDD initializing function, all titles will be erased.)
Dub any important recordings to DVD-RW/R disc(s) before initializing
the HDD.

YES
NO

YES
NO

VR
VIDEO

YES
NO

Before recording to DVD-RW, initialize the disc in VR mode
or Video mode.
You can also initialize the HDD. Initialize the HDD only after
dubbing important recordings onto DVD-RW/R disc(s).

Finalization is done so that a recorded DVD-RW/R disc can
be played back with other recorders.

• Set this when you want to playback a VR mode or Video mode disc

using another recorder capable of playback.
If you finalize a recording on DVD-R disc, you will not be able to
record any more on the disc.

• Finalization can take anywhere from a few minutes to one hour.

During finalization, all types of operation are disabled (including
turning off power and removing the disc).

• Do not unplug the power cord during finalization. Doing so may make

the disc unusable.

• This resets a finalized DVD-RW disc so you can record on it again.

YES
NO

YES
NO

DV-HR300H-089-100

04.1.16, 4:32 PM

99