DOWNLOAD Sharp DV-HR300H (serv.man22) Service Manual ↓ Size: 2.36 MB | Pages: 45 in PDF or view online for FREE

 

VR MODE

 

VIDEO MODE

 

• When this Recorder is connected with a DV-format

camcorder using a DV cable, you can record and edit
with minimal deterioration of picture and sound quality
using a digital signal.

• You can also display an operation panel for digital

camcorder control on the screen, and operate using the
buttons on the panel. This allows easy recording onto
disc. Record after first performing “DV SETTING” (page
93) at the START MENU.

* i.LINK is a function that lets you control other equipment

by input and output of video, audio, data and control
signals between equipment having an i.LINK terminal.

* i.LINK refers to the IEEE1394-1995 industry specification

and extensions thereof. The 

 logo is used for products

compliant with the i.LINK standard.

* i.LINK 

 is a trademark.

• The DV IN terminal of this Recorder only enables input of

DV-format camcorders (DVC-SD signals). It is not
compatible with satellite receivers or Digital VHS video
recorders since they employ a different format.

• To connect the Recorder with a digital camcorder, set

digital camcorder POWER to “PLAY (Video side)”, and
connect while in the stopped state. If the DV is connected
when POWER is set to “RECORD (Camera side)”, or
when tape has been played back, the DV link will not
work correctly.

• There are some digital camcorders which cannot be

operated using the On-Screen Control Panel of this
Recorder, even if you set “DV LINK” under “DV SETTING”
to “ON”. In cases like this, set “DV LINK” to “OFF”. (page
93)

• When this Recorder is connected to a camcorder

equipped with a DV terminal, the signal may not be input
to this Recorder depending on the camcorder. When this
happens, use an analogue connection (page 86).

• The DV IN terminal is not compatible with connection to a

PC.

• This Recorder cannot be controlled from other equipment

connected to the DV IN terminal.

• Only one camcorder can be connected to this Recorder

using the DV IN terminal.

• Connect this Recorder and the camcorder directly. The

DV signal will not be input if the camcorder is connected
to this Recorder through other equipment with a DV IN
terminal.

Æ Date and time data as well as the contents of cassette

Æ Video and audio signals of protected material or

Æ Monaural audio cannot be input through the DV IN

Digital camcorders typically have the following two audio
modes.
16-bit (48 kHz)

Although this yields high sound quality, only one stereo
audio signal can be processed.

Two stereo signals can be processed. In general,
overdubbed audio is recorded in Stereo 2.

Æ This Recorder allows listening or recording of either

Stereo 1 or Stereo 2 audio if the input audio is in the 12-bit
audio mode.

Æ This Recorder is unable to process 44.1 kHz input audio

signals.

Refer to the user’s manual provided with the camcorder for
information on the procedure for connecting the camcorder
with this Recorder.

Before connecting, set the power 
switch of the digital camcorder to 
“Video (Playback)” and stop the 
camcorder.

DV cable 
(commercially available)

The Recorder

Digital camcorder

To DV terminal

To DV IN terminal

DV-HR300H-082-086

04.1.16, 4:12 PM

84

• Before starting recording, check setting of “DV

AUDIO INPUT” using “DV SETTING” (page 93).

• The setting will cycle as follows each time you press

the button.

• Press '

'

'

'

' / "

"

"

"

" / \

\

\

\

\ / |

|

|

|

| to select the desired button on

the On-screen Control Panel, then press SET/
ENTER to operate.

• If you press EXIT on the remote control, the On-

screen Control Panel will disappear. To display it
again, press ON SCREEN (under the cover).

●REC when you reach the scene you

• The Recorder will start recording.

• Press REC PAUSE again to cancel pause.

• Material protected with a copy guard cannot be recorded.
• Date and time data as well as the contents of cassette

memory cannot be recorded.

• There are some digital camcorders which cannot be

operated using the On-screen Control Panel, even when
“DV LINK” is set to “ON”. In such cases, set it to “OFF”.
(See page 93.)

SELECT

ENTER

PLAYBACK

PLAYBACK

DV LINK (ENABLES CONTROL OF DV CAMCORDER)

EXIT

ENTER

00 : 00 : 10

EXIT

L1 (IN 1)

TV channels

DV (DV IN)

L3 (IN 3)

L2 (IN 2)

Abnormal images may be recorded or the Recorder
enters the Pause mode when any of the following
occur during DV capture.
• When the connected equipment plays back a portion

where nothing is recorded or video containing a copy
guard signal.

• When the DV cable is disconnected or the camcorder

power is turned off during DV capture.

• When playback from the camcorder is stopped.

When “DV LINK” is set to “ON”

Select |

|

|

|

| on the On-screen Control Panel to

start playback, then press SET/ENTER.

DV-HR300H-082-086

04.1.16, 4:12 PM

85

 

VR MODE

 

VIDEO MODE

 

Material from a camcorder can be recorded with this
Recorder using an analog connection. You can capture
video by connecting a camcorder or VCR to the LINE IN 1,
2 or 3 jacks of this Recorder.

• More vivid images can be viewed by connecting the S-

VIDEO input jack on this Recorder with the S-video output
jack on the camcorder using an S-video cable.

• Some camcorders may be required to be connected

using a special cable.

• Refer to the operation manual provided with the

camcorder for further information on the procedure for
connecting the camcorder.

• Material protected with a copy guard cannot be re-

corded. It may be impossible to get the correct video,
even if you just view without recording.

• Date and time as well as the contents of cassette memory

cannot be recorded with this Recorder.

• If you input video from an external device to this Re-

corder, there will be a slight difference in image quality
between the video viewed from the external device
directly on the TV, and video viewed as external input to
the Recorder.

Example:
To record by connecting a camcorder to the LINE IN 3
jacks.

To VIDEO/AUDIO

Input jacks

To S-video
output jack

To video/audio

output jack

To S-VIDEO

Input jack

Camcorder

The Recorder

Video/audio cable
(provided with camcorder or
commercially available)

S-video cable

(commercially

available)

To record to HDD
• Switch audio of the external device to the audio you

want to capture.

To record to DVD
• Select audio using “EXTERNAL AUDIO” (page 87).
• Select “L CH” or “R CH” with “VIDEO MODE

AUDIO” (page 87) to record in Video mode.

• The setting will cycle as follows each time you press

the button.

●REC when you reach the scene you

• The Recorder starts recording.

• Press REC PAUSE again to cancel Pause mode.

L1 (IN 1)

TV channels

DV (DV IN)

L3 (IN 3)

L2 (IN 2)

DV-HR300H-082-086

04.1.16, 4:12 PM

86

• This sets the interval of automatic chapter setting during recording.
• Chapter marks set on a DVD-RW/R in Video mode cannot be combined by editing, so

select an appropriate interval.

• This function works when timer recording (VIDEO Plus+/Timer Programme) onto DVD-

RW/R. If disc capacity runs low, and the programme cannot be recorded to the end,
this function will automatically change the recording mode so the programme will fit.
(The recording mode set in above situation will have lower picture quality than the
originally set recording mode.)

• If there is very little disc capacity left on the disc, the programme may not fit even if

Exact Recording is set.

• When recording in EP or MN1 mode, there is no lower recording mode, so Exact

Recording will not work.

• PCM: If you record by setting the recording mode to “FINE” or “MN32”, you can record

audio as PCM (uncompressed) audio which can be played back with 2ch audio
equipment.
 * This will not work when recording with the recording mode set to anything other than

“FINE” or “MN32”.

 * Recording is done with a recording mode whose image quality is slightly lower than

FINE mode recorded with the “MPEG” setting.

• When making a PCM recording of bilingual sound, only the audio selected in “VIDEO

MODE AUDIO” is recorded.

• MPEG: Records audio as MPEG audio.

 • This selects audio to be input from an external device.

 * Be sure to always select “BILINGUAL” when recording bilingual sound. If you select

“STEREO” when recording, the audio for the left channel (“L CH”) and right channel
(“R CH”) will be heard together during playback.

 * When recording bilingual sound, you can switch between the left channel (“L CH”)

and right channel (“R CH”) during playback in VR mode. In Video mode, only the
audio set in “VIDEO MODE AUDIO” is recorded.

• This selects whether to record the left channel (“L CH”) or right channel (“R CH”) when

recording (or dubbing) bilingual sound to DVD-RW/R in Video mode.
 * This does not apply when recording from the DV IN terminal.

• If you set by selecting one of the 32 picture quality levels for “MN”, recording will be

done at that picture quality when “MN” is selected using REC MODE on the remote
control. For details, see page 40.

This section explains various settings relating to recording and playback which can be used to get more out of the Recorder.
• For details about each setting, see the corresponding pages.

REC. FUNCTION s page 87
VIEW/PLAY SETTING s page 89
ADJUSTMENT s page 91

10 (10 min interval)
15 (15 min interval)
30 (30 min interval)
- -  (off)

YES
NO

PCM
MPEG

STEREO
BILINGUAL

L CH
R CH

32 levels

DV-HR300H-087-088

04.1.16, 4:15 PM

87