Sharp XL-UR230H User Manual / Operation Manual ▷ View online
E-36
ENGLISH
8
XL-UR2110H
XL-UR250H
XL-UR230H
Advanced Features
Enhancing your system
The connection lead is not included. Purchase a commercially
available lead as shown below.
available lead as shown below.
Auto power on function (USB/AUX):
When you press any of the following buttons, the unit turns on.
z VIDEO/AUX/USB button (main unit and remote control): The unit
turns on and the “USB” or “AUX” function is activated.
z
/ button on the main unit: The unit turns on and playback of
the last function starts (CD,TUNER,VIDEO/AUX/USB).
Listening to the playback sounds from VCR,
DVD, etc.
Note:
To prevent noise interference, place the unit away from the
television.
To prevent noise interference, place the unit away from the
television.
Headphones
z Do not turn the volume on to full at switch on and listen to music
at moderate levels. Excessive sound pressure from earphones
and headphones can cause hearing loss.
and headphones can cause hearing loss.
z Before plugging in or unplugging the headphones, reduce the
volume.
z Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
impedance is 32 ohms.
z Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME control.
Red
White
Red White
RCA lead
(not supplied)
(not supplied)
VCR, DVD, etc.
To the line
output
sockets
output
sockets
1
Use a connection lead to connect the VCR, DVD, etc. to the
VIDEO/AUX IN sockets.
VIDEO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX/USB button.
4
Play the connected equipment.
E-37
ENGLISH
XL-UR2110H
XL-UR250H
XL-UR230H
Advanced Features
Enhancing your system (continued)
Subwoofer connection
When a commercially available subwoofer with a built-in amplifier is
connected to this unit, you can enjoy sound with emphasised bass.
Connect an RCA lead from a commercially available speaker with a
built-in amplifier to the SUBWOOFER PRE-OUT socket.
connected to this unit, you can enjoy sound with emphasised bass.
Connect an RCA lead from a commercially available speaker with a
built-in amplifier to the SUBWOOFER PRE-OUT socket.
Troubleshooting chart
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
General
CD player
Symptom
Possible cause
z The clock is not set to the
correct time.
z Did a power failure occur? Reset
the clock. (Refer page 11)
z When a button is pressed,
the unit does not respond.
z Set the unit to the power stand-
by mode and then turn it back on.
z If the unit still malfunctions, reset
it. (Refer page 38)
z No sound is heard.
z Is the volume level set to “0”?
z Are the headphones connected?
z Are the speaker wires discon-
z Are the headphones connected?
z Are the speaker wires discon-
nected?
Symptom
Possible cause
z Playback does not start.
z Is the disc loaded upside down?
z Playback stops in the
middle or is not performed
properly.
properly.
z Does the disc satisfy the
standards?
z Is the disc distorted or
scratched?
z Playback sounds are
skipped, or stopped in the
middle of a track.
middle of a track.
z Is the unit located near excessive
vibrations?
z Is the disc very dirty?
z Has condensation formed inside
z Has condensation formed inside
the unit?
E-38
ENGLISH
8
XL-UR2110H
XL-UR250H
XL-UR230H
References
Remote control
Tuner
USB
Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc in the unit until normal playback is
possible (about 1 hour). Wipe off any condensation on the transmitter
with a soft cloth before operating the unit.
humid environment may cause condensation inside the cabinet (CD
pickup, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc in the unit until normal playback is
possible (about 1 hour). Wipe off any condensation on the transmitter
with a soft cloth before operating the unit.
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such problem occurs, do the following:
1
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such problem occurs, do the following:
1
Set the unit to the stand-by mode and turn the power on again.
2
If the unit is not restored in the previous operation, unplug and
plug in the unit again, and then turn the power on.
plug in the unit again, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
If neither operation above restores the unit, clear all the memory by
resetting it.
Factory Reset, Clearing All Memory
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
mode.
2
Whilst pressing down the 1 button and the 5 button, press
the ON/STAND-BY button until “CLEAR ALL” appears.
the ON/STAND-BY button until “CLEAR ALL” appears.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
Symptom
Possible cause
z The remote
control does not
operate.
operate.
z Is the AC power lead of the unit plugged in?
z Is the battery polarity correct?
z Are the batteries dead?
z Is the distance or angle incorrect?
z Does the remote control sensor receive
strong light?
Symptom
Possible cause
z The radio
makes unusual
noises continu-
ously.
noises continu-
ously.
z Is the unit placed near the TV or computer?
z Is the FM aerial or AM loop aerial placed
properly? Move the aerial away from the
AC power lead if it's located nearby.
AC power lead if it's located nearby.
Symptom
Possible cause
z Device cannot
be detected.
z Is there any MP3/WMA file available?
z Is the device properly connected?
z Is it MTP device?
z Does the device contain AAC file only?
z Playback does
not start.
z Is it the copyright protected WMA file?
z Is it the false MP3 file?
z Wrong time
display.
z Wrong file name
display.
z Is Variable Bitrate file being played back?
z Is the File Name written in Chinese or
z Is the File Name written in Chinese or
Japanese characters?
z Recording
cannot start.
z Is the USB device in write protect mode?
z Is it a CD-WMA disc?
z Is the device’s memory already full?
ON
/
STAND-BY
E-39
ENGLISH
XL-UR2110H
XL-UR250H
XL-UR230H
References
Troubleshooting chart (continued)
Before transporting the unit
Remove all CDs from the unit. Make sure there is no CD in the disc
tray. Then, set the unit to the power stand-by mode. Carrying the
unit with discs left inside can damage the unit.
tray. Then, set the unit to the power stand-by mode. Carrying the
unit with discs left inside can damage the unit.
Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD
collection and player.
z Do not write on either side of the disc, particularly the non-label
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD
collection and player.
z Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
z Keep your discs away from direct sunlight, heat, and excessive
moisture.
z Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
Maintenance
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
solution, then with a dry cloth.
Caution:
z Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
z Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
z Do not apply oil to the inside of the unit. It may cause
malfunctions.
Click on the first or last page to see other XL-UR230H service manuals if exist.