Sharp HT-DV50H (serv.man3) User Manual / Operation Manual ▷ View online
E-32
ENGLISH
8
HT-DV40H
HT-DV50H
HT-DV50H
Basic Operation
Audistry sound mode
Enjoy a variety of sounds by each or any combination of the 4
modes.
Press the SHIFT and desired mode button simultaneously.
Press it again to cancel.
modes.
Press the SHIFT and desired mode button simultaneously.
Press it again to cancel.
ON
The Dolby Virtual Speaker creates multichannel-like
sound effects.
sound effects.
Compared with the cinema mode, the bass sound level is
slightly reduced.
slightly reduced.
The Dolby Pro Logic indicator also lights up if 2ch sound
signals are detected.
signals are detected.
OFF
The Dolby Virtual Speaker is deactivated.
1
2
3
4
5
6
7
8
9
+10
0
6
3
9
When you select
“SOUND SPACE”
When you select
“NATURAL BASS”
When you select
“INTELLIGENT VOLUME”
When you select
“MONO TO STEREO”
When you select
“DVS”
SOUND
SPACE
NATURAL
BASS
INTELLIGENT
VOLUME
MONO TO
STEREO
:Disabled
:Enabled
Possible combinations
E-33
ENGLISH
HT-DV40H
HT-DV50H
HT-DV50H
Basic Operation
Enjoying surround sound (sound mode) (continued)
Notes:
When setting each mode of Audistry to “ON”, the preset sound
mode setting is cancelled.
When setting the SOUND SPACE or MONO TO STEREO mode
to “ON”, the DVS setting is also cancelled. (It is not cancelled even
if the NATURAL BASS or INTELLIGENT VOLUME mode is set to
“ON”.)
mode setting is cancelled.
When setting the SOUND SPACE or MONO TO STEREO mode
to “ON”, the DVS setting is also cancelled. (It is not cancelled even
if the NATURAL BASS or INTELLIGENT VOLUME mode is set to
“ON”.)
SOUND SPACE
(Sound stage expansion)
The 4 speakers create
spacious stereo sounds.
spacious stereo sounds.
(The SOUND SPACE indicator
lights up.)
lights up.)
NATURAL BASS
(Bass sound expansion)
The system's low-frequency
characteristics realise the
optimal bass sounds.
characteristics realise the
optimal bass sounds.
(The NATURAL BASS indicator
lights up.)
lights up.)
INTELLIGENT VOLUME
(Peak limiter and expander)
Appropriate listener-friendly
volumes realised; the volume is
decreased during loud sounds,
and increased during low
sounds.
volumes realised; the volume is
decreased during loud sounds,
and increased during low
sounds.
(The INTELLIGENT VOLUME
indicator lights up.)
indicator lights up.)
MONO TO STEREO
(Mono
Stereo conversion)
You can enjoy monaural sound
sources with a stereo-like
effect.
sources with a stereo-like
effect.
(The MONO TO STEREO
indicator lights up.)
indicator lights up.)
E-34
ENGLISH
8
HT-DV40H
HT-DV50H
HT-DV50H
DVD Operation
Playing a disc
Turn on the TV, and switch the input to the “VIDEO 1”, “VIDEO
2”, etc. accordingly.
2”, etc. accordingly.
Playback
1
2
3
4
5
6
7
8
9
+10
0
1
Press the ON/STAND-BY button to turn the power on.
2
“SHARP” startup screen appears on the TV screen.
3
Press the DVD/CD button on the remote control.
4
Insert the disc into the disc slot, label side up.
The disc must be fully inserted into the disc slot before
playing. If “NO DISC” appears due to improper disc
insertion, switch off the AC power supply and then switch it
on again.
insertion, switch off the AC power supply and then switch it
on again.
8 cm disc can be inserted without an adaptor.
Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
5
Some discs play automatically. If playback does not start,
press the (DVD/CD ) button.
press the (DVD/CD ) button.
When the menu appears on the TV screen:
On DVD:
On DVD:
Select item by using cursor ( , , or ) button and press
ENTER button.
To return to the previous display, press the RETURN
button.
WMA
NO DISC
8 cm (3")
or
12 cm (5")
Disc play indicator
E-35
ENGLISH
HT-DV40H
HT-DV50H
HT-DV50H
DVD Operation
Playing a disc (continued)
Playback will begin from track 1.
After the last track on the disc is played, the unit will stop
automatically.
After the last track on the disc is played, the unit will stop
automatically.
Caution:
Do not play discs of special shapes (heart, octagon, etc). They
may cause malfunctions.
Do not push the disc whilst it is moving.
If the power fails whilst the disc is moving, wait until the power is
restored.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
may cause malfunctions.
Do not push the disc whilst it is moving.
If the power fails whilst the disc is moving, wait until the power is
restored.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
Auto power on function
When you press any of these buttons during stand-by mode, the
units turns on.
units turns on.
FUNCTION button (main unit): The unit turns on and the last of
previous function is activated. (DVD/CD/USB/TUNER/OPTICAL
1/OPTICAL 2/AUX IN/SCART).
previous function is activated. (DVD/CD/USB/TUNER/OPTICAL
1/OPTICAL 2/AUX IN/SCART).
/ button (main unit): The unit turns on and start playback the
last of previous function of DVD/CD or USB.
DVD/CD button (remote control): The unit turns on and the “DVD/
CD” function is activated.
USB button (remote control): The unit turns on and the “USB”
function is activated.
AUX button (remote control): The unit turns on and the last of pre-
vious function is activated. (OPTICAL 1/OPTICAL 2/AUX IN/
SCART).
TUNER button (remote control): The unit turns on and the
“TUNER” function is activated.
USB
DVD/CD button (remote control): The unit turns on and the “DVD/
CD” function is activated.
USB button (remote control): The unit turns on and the “USB”
function is activated.
AUX button (remote control): The unit turns on and the last of pre-
vious function is activated. (OPTICAL 1/OPTICAL 2/AUX IN/
SCART).
TUNER button (remote control): The unit turns on and the
“TUNER” function is activated.
USB
/ button (remote control): The unit turns on and start
playback the “USB” function.
DVD/CD
DVD/CD
/ button (remote control): The unit turns on and start
playback the “DVD/CD” function.
Various disc functions
Notes for CD or MP3/WMA disc:
To remove the disc:
In the stop mode, press the
In the stop mode, press the
button.
Function
Main
unit
Remote
control
Operation
Play
Press in the stop mode.
Stop
Press in the playback mode.
Pause
Press in the playback mode.
Press the / button to resume
playback from the paused point.
Press the / button to resume
playback from the paused point.
Track
up/
Track
down
up/
Track
down
Press in the playback or stop
mode.
If you press the button in the stop
mode, press the / button to
start the desired track.
mode.
If you press the button in the stop
mode, press the / button to
start the desired track.
Fast
forward/
Fast
reverse
forward/
Fast
reverse
Press and hold down in the
playback mode.
Release the button to resume
playback.
playback mode.
Release the button to resume
playback.
When the end of the last track is reached during fast forward,
playback will stop. When the beginning of the first track is reached
during fast reverse, the unit will enter the playback mode.
Rewritable multi-session discs with unfinished writing, can still be
played.
playback will stop. When the beginning of the first track is reached
during fast reverse, the unit will enter the playback mode.
Rewritable multi-session discs with unfinished writing, can still be
played.
Click on the first or last page to see other HT-DV50H (serv.man3) service manuals if exist.