Sharp HT-DV50H (serv.man3) User Manual / Operation Manual ▷ View online
E-16
ENGLISH
8
HT-DV40H
HT-DV50H
HT-DV50H
Preparation for Use
CP-DV50H
Warning:
Fix the speaker stand properly according to this manual. Improper
fixing may cause speaker to fall leading to injury or breakage.
To ensure a proper fixing, contact your dealer or installer.
During fixing, be careful not to pinch your fingers.
Do not modify or change the stand. It may cause the speaker to
fall leading to injury or breakage.
fixing may cause speaker to fall leading to injury or breakage.
To ensure a proper fixing, contact your dealer or installer.
During fixing, be careful not to pinch your fingers.
Do not modify or change the stand. It may cause the speaker to
fall leading to injury or breakage.
1
Route the speaker wire through a stand hole and attach the
bottom cabinet to stand.
bottom cabinet to stand.
2
Fix them securely with the supplied washer 3 screws.
3
Attach the top cabinet to bottom cabinet and fix them securely
with the supplied 2 screws.
with the supplied 2 screws.
Bottom
cabinet
cabinet
Speaker
wire
wire
Stand
Top
cabinet
cabinet
4
Connect the wire without insulation tube to the speakers minus
(-) terminal, and the wire with red insulation tube to the speakers
plus (+) terminal.
(-) terminal, and the wire with red insulation tube to the speakers
plus (+) terminal.
5
Connect the other end of speaker wire to the main unit.
E-17
ENGLISH
HT-DV40H
HT-DV50H
HT-DV50H
Preparation for Use
System connections (continued)
Subwoofer
Caution:
Aerial connection
External FM aerial
Use an external FM aerial if you require better reception.
Consult your dealer.
Consult your dealer.
Note:
When an external FM aerial is used, disconnect the supplied FM
aerial wire.
When an external FM aerial is used, disconnect the supplied FM
aerial wire.
AC power connection
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the stand-by mode.
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the stand-by mode.
Note:
Unplug the AC power lead from the wall socket if the unit will not be
in use for a prolonged period of time.
Unplug the AC power lead from the wall socket if the unit will not be
in use for a prolonged period of time.
Demonstration mode
1
Connect the wire without insulation tube to the SUBWOOFER
minus (-) terminal, and the wire with purple insulation tube to
the SUBWOOFER plus (+) terminal.
minus (-) terminal, and the wire with purple insulation tube to
the SUBWOOFER plus (+) terminal.
Never mistake the FRONT SPEAKERS and the SUBWOOFER
terminals. The unit or the speakers may be damaged.
If you use other speakers with an impedance lower than that
specified, the unit may be damaged. Front speakers: 4 ohms,
Subwoofer: 12 ohms.
Do not mistake the right and the left
channels. The right speaker is the one on the
right side when you face the unit.
Do not let the bare speaker wires touch
each other.
Do not allow any objects to fall into or to be
placed in the bass reflex duct.
Do not stand or sit on the subwoofer/
speakers. You may be injured.
terminals. The unit or the speakers may be damaged.
If you use other speakers with an impedance lower than that
specified, the unit may be damaged. Front speakers: 4 ohms,
Subwoofer: 12 ohms.
Do not mistake the right and the left
channels. The right speaker is the one on the
right side when you face the unit.
Do not let the bare speaker wires touch
each other.
Do not allow any objects to fall into or to be
placed in the bass reflex duct.
Do not stand or sit on the subwoofer/
speakers. You may be injured.
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the
direction where the strongest signal can be
received.
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the
direction where the strongest signal can be
received.
Note:
Placing the aerial on the unit or near the AC
power lead may cause noise pickup.
Place the aerial away from the unit for better
reception.
Placing the aerial on the unit or near the AC
power lead may cause noise pickup.
Place the aerial away from the unit for better
reception.
Purple
Incorrect
FM
aerial
aerial
The first time the unit is plugged in, the unit
will enter the demonstration mode. You will
see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode
(demonstration mode), press the SHIFT and
DEMO buttons on the remote control. The unit
will enter the low power consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the SHIFT and
DEMO buttons on the remote control again.
will enter the demonstration mode. You will
see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode
(demonstration mode), press the SHIFT and
DEMO buttons on the remote control. The unit
will enter the low power consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the SHIFT and
DEMO buttons on the remote control again.
75 ohms
coaxial cable
coaxial cable
External
FM aerial
FM aerial
Wall socket
(AC 220 - 240 V ~ 50 Hz)
E-18
ENGLISH
8
HT-DV40H
HT-DV50H
HT-DV50H
Preparation for Use
Connecting to a conventional TV/monitor
If the TV/monitor has video input, connect it to
the VIDEO OUT socket on the rear of the unit.
the VIDEO OUT socket on the rear of the unit.
If the TV/monitor has S-video input, connect it to
the S-VIDEO OUT socket on the rear of the unit.
the S-VIDEO OUT socket on the rear of the unit.
If the TV/monitor has component video input,
connect it to the COMPONENT VIDEO OUT
socket on the rear of the unit.
connect it to the COMPONENT VIDEO OUT
socket on the rear of the unit.
Notes:
Change the TV input in accordance with the connected socket.
Do not connect other equipment between the TV and this unit. If
they are connected via a VCR, pictures may be distorted.
If your TV has different indications for the component video inputs
(Y, CB and CR or Y, B-Y and P-Y), connect sockets with its
matching colour.
Do not connect to a component video input socket designed for
the high-vision system, which is not DVD-compatible (the images
may be distorted or not appear).
If the TV/monitor has scart input, connect it to
the SCART OUT socket on the rear of the unit.
(Do not connect the SCART cable to equipment
other than the TV/monitor)
the SCART OUT socket on the rear of the unit.
(Do not connect the SCART cable to equipment
other than the TV/monitor)
To select SCART function:
On main unit: Press FUNCTION button repeatedly until SCART is
displayed.
On remote control: Press AUX button repeatedly until SCART is
displayed.
displayed.
On remote control: Press AUX button repeatedly until SCART is
displayed.
If the TV/monitor has HDMI input, connect it to
the HDMI socket on the rear of the unit.
the HDMI socket on the rear of the unit.
Caution:
Turn off all other equipment before making connections.
Turn off all other equipment before making connections.
Video signal
TV
(not supplied)
To video
input socket
input socket
TV
Video signal
S-video cable
(not supplied)
(not supplied)
To S-video
input socket
input socket
TV
Component
video cable
(not supplied)
video cable
(not supplied)
To component
video input socket
video input socket
TV
To SCART
input socket
input socket
SCART cable
(not supplied)
(not supplied)
Video/Audio signal
HDMl cable
To HDMI
input socket
input socket
TV
E-19
ENGLISH
HT-DV40H
HT-DV50H
HT-DV50H
Preparation for Use
Audio connection to other equipment
You can hear the sound of other equipment via this product. Connect
the DVD player, VCR or digital tuner to a TV directly to receive the
images (refer to the operation manual of each equipment).
the DVD player, VCR or digital tuner to a TV directly to receive the
images (refer to the operation manual of each equipment).
Caution:
Turn off the other equipment before making this connection.
Turn off the other equipment before making this connection.
Connection for the analogue sound (VCR, etc.)
To select AUX function:
On main unit: Press FUNCTION button repeatedly until AUX is
displayed.
On remote control: Press AUX button repeatedly until AUX is
displayed.
displayed.
On remote control: Press AUX button repeatedly until AUX is
displayed.
Connection for the digital tuner sound (or other
optical digital equipment such as an MD player)
optical digital equipment such as an MD player)
If the digital equipment has an optical output socket, you can enjoy
better sound by connecting it to the optical digital input socket of the
main unit using the optical digital cable.
To select OPTICAL 1 or OPTICAL 2 function:
better sound by connecting it to the optical digital input socket of the
main unit using the optical digital cable.
To select OPTICAL 1 or OPTICAL 2 function:
On main unit: Press FUNCTION button repeatedly until
OPTICAL 1 or OPTICAL 2 is displayed.
On remote control: Press AUX button repeatedly until
OPTICAL 1 or OPTICAL 2 is displayed.
OPTICAL 1 or OPTICAL 2 is displayed.
On remote control: Press AUX button repeatedly until
OPTICAL 1 or OPTICAL 2 is displayed.
To audio input sockets (AUX IN)
Audio cable
(commercially available)
(commercially available)
To audio
output sockets
output sockets
VCR, DVD recorder, etc.
TV
To optical digital
audio input socket
audio input socket
Optical digital cable
(commercially available)
(commercially available)
To optical
digital audio
output socket
digital audio
output socket
Digital equipment such
as a digital music player
as a digital music player
Digital tuner, etc.
TV
Click on the first or last page to see other HT-DV50H (serv.man3) service manuals if exist.