Sharp HT-DV50H (serv.man3) User Manual / Operation Manual ▷ View online
E-20
ENGLISH
8
HT-DV40H
HT-DV50H
HT-DV50H
Preparation for Use
Remote control
Battery installation
Precautions for battery use:
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leakage.
Do not mix old and new batteries.
Remove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Installing the batteries incorrectly may cause the unit to
malfunction.
Batteries (battery packed or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
Installing the batteries incorrectly may cause the unit to
malfunction.
Batteries (battery packed or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
Battery removal:
Open the battery cover and pull up the battery to take out.
Open the battery cover and pull up the battery to take out.
Notes concerning use:
Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 “AA” size batteries
(UM/SUM-3, R6, HP-7 or similar).
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this
occurs.
Keep the remote control away from moisture, heat, shock, and
vibrations.
operation becomes erratic. Purchase 2 “AA” size batteries
(UM/SUM-3, R6, HP-7 or similar).
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this
occurs.
Keep the remote control away from moisture, heat, shock, and
vibrations.
Test of the remote control
After installing the unit (see pages 11 - 19), check that the remote
control operates correctly.
Point the remote control directly at the remote sensor on the unit.
control operates correctly.
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can use the unit.
Press the ON/STAND-BY button. Does the power turn on? Now, you
can use the unit.
1
Open the battery cover.
2
Insert the supplied batteries according to the direction
indicated in the battery compartment.
indicated in the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
3
Close the cover.
1
2
3
4
5
6
7
8
9
Remote sensor
0.2 m - 6 m
(8" - 20’)
E-21
ENGLISH
HT-DV40H
HT-DV50H
HT-DV50H
Preparation for Use
Changing the set up menu
Notes:
The setting are stored even if the unit is set to stand-by mode.
The backup function protects the stored setting for a few hours
should there be a power failure or AC power lead disconnection.
System set up can be performed during playback mode.
The backup function protects the stored setting for a few hours
should there be a power failure or AC power lead disconnection.
System set up can be performed during playback mode.
1
2
3
4
5
6
7
8
9
+10
0
1
Turn on the TV.
2
Set the TV to the correct input, eg. “AV1”, “VIDEO”, etc.
3
Turn on the unit by pressing the
ON/STAND-BY button.
ON/STAND-BY button.
The SHARP startup screen appears.
Note:
Startup screen will be displayed when
both S-Video cable and SCART cable
are connected to the TV. If only the S-
Video cable is connected, the screen
may be blank. To set up S-Video mode,
use video out cable or SCART cable.
Startup screen will be displayed when
both S-Video cable and SCART cable
are connected to the TV. If only the S-
Video cable is connected, the screen
may be blank. To set up S-Video mode,
use video out cable or SCART cable.
4
Press the SHIFT and SET UP buttons.
5
Press the or button to select a menu.
See the list on pages 22 - 27 for set up menu.
6
Press the , ,
or
button to change the setting and
press the ENTER button.
7
After setting is completed, select
“EXIT SET UP”, then press the ENTER
button to return to the main page.
“EXIT SET UP”, then press the ENTER
button to return to the main page.
E-22
ENGLISH
8
HT-DV40H
HT-DV50H
HT-DV50H
Preparation for Use
Set up menu Selectable parameters (* indicates default setting)
Description
SYSTEM
SET UP
SET UP
TV SYSTEM
NTSC
PAL*
AUTO
PAL*
AUTO
Select the correct colour system (TV standard).
(for details, see page 26)
(for details, see page 26)
VIDEO
S-VIDEO
SCART*
COMP. P-SCAN ON
COMP. P-SCAN OFF
SCART*
COMP. P-SCAN ON
COMP. P-SCAN OFF
Select “S-VIDEO or SCART or COMP. P-SCAN
ON or COMP. P-SCAN OFF” mode if connecting
unit to TV (for details, see page 18).
Selection can also be made using remote control
VIDEO MODE button.
ON or COMP. P-SCAN OFF” mode if connecting
unit to TV (for details, see page 18).
Selection can also be made using remote control
VIDEO MODE button.
TV TYPE
4:3 PS*
4:3 LB
16:9
4:3 LB
16:9
The screen mode should be set according to the
connected TV type (for details, see page 26).
connected TV type (for details, see page 26).
PASSWORD
_ _ _ _
Change the password (for details, see page 27).
RATING
1 KID SAFE
2 G
3 PG
4 PG13
5 PG-R
6 R
7 NC-17
8 ADULT*
2 G
3 PG
4 PG13
5 PG-R
6 R
7 NC-17
8 ADULT*
Set a restriction level for DVD viewing (for details,
see page 27).
Enter a 4-digit password.
It is set to 0000 by default.
see page 27).
Enter a 4-digit password.
It is set to 0000 by default.
DEFAULT
RESTORE
This resets all settings, except for PARENTAL to
the factory defaults.
the factory defaults.
LANGUAGE
SET UP
SET UP
OSD
LANGUAGE
LANGUAGE
ENGLISH*
FRENCH
SPANISH
CHINESE
GERMAN
ITALIAN
PORTUGUESE
DUTCH
FRENCH
SPANISH
CHINESE
GERMAN
ITALIAN
PORTUGUESE
DUTCH
You can select the desired OSD (On Screen
Display) language for the set up menu or
playback control screen.
Example: To select German language, choose
“GERMAN” from the menu. Press ENTER button
and below screen will appear in German.
Display) language for the set up menu or
playback control screen.
Example: To select German language, choose
“GERMAN” from the menu. Press ENTER button
and below screen will appear in German.
SPRACHE EINST
OSD-SPRACHE
OSD-SPRACHE
AUDIO
UNTERTITEL
MENU
DIVX[R] VOD
UNTERTITEL
MENU
DIVX[R] VOD
MENU ENDE
ENGLISCH
FRANZÖSISH
SPANISH
CHINESISCH
FRANZÖSISH
SPANISH
CHINESISCH
DEUTSCH
ITALIENISCH
PORTUGIESISCH
HOLLÄNDISH
PORTUGIESISCH
HOLLÄNDISH
E-23
ENGLISH
HT-DV40H
HT-DV50H
HT-DV50H
Preparation for Use
Changing the set up menu (continued)
Set up menu Selectable parameters (* indicates default setting)
Description
LANGUAGE
SET UP
SET UP
AUDIO
LANG
LANG
ENGLISH*
FRENCH
SPANISH
CHINESE
GERMAN
ITALIAN
FRENCH
SPANISH
CHINESE
GERMAN
ITALIAN
Select the language audible from the speakers.
SUBTITLE
LANG
LANG
ENGLISH*
FRENCH
SPANISH
CHINESE
GERMAN
ITALIAN
OFF
FRENCH
SPANISH
CHINESE
GERMAN
ITALIAN
OFF
Select the subtitle displayed on the TV screen.
MENU
LANG
LANG
ENGLISH*
FRENCH
SPANISH
CHINESE
GERMAN
ITALIAN
FRENCH
SPANISH
CHINESE
GERMAN
ITALIAN
Select the disc menu language.
DivX [R]
VOD
VOD
REGISTRATION
CODE
* * * * * * * *
SHARP provide you the DivX registration code that
allows you to rent and purchase videos using the
DivX service. Please go to www.divx.com/vod for
more information.
allows you to rent and purchase videos using the
DivX service. Please go to www.divx.com/vod for
more information.
AUDIO
SET UP
SET UP
AUDIO OUT
SP DIF/OFF
SP DIF/RAW
SP DIF/PCM*
SP DIF/RAW
SP DIF/PCM*
Useful whilst using HDMI cable. When playing a
disc recorded with Dolby Digital or DTS, the
corresponding digital signals will be output from
the HDMI output socket.
disc recorded with Dolby Digital or DTS, the
corresponding digital signals will be output from
the HDMI output socket.
PCM : Choose this setting if the TV with HDMI
technology cannot support Dolby Digital or DTS
to avoid noise or mute from the TV.
RAW : Choose this setting if the TV with HDMI
technology can support Dolby Digital or DTS.
technology cannot support Dolby Digital or DTS
to avoid noise or mute from the TV.
RAW : Choose this setting if the TV with HDMI
technology can support Dolby Digital or DTS.
Click on the first or last page to see other HT-DV50H (serv.man3) service manuals if exist.