Sharp HT-DV50H (serv.man3) User Manual / Operation Manual ▷ View online
E-28
ENGLISH
8
HT-DV40H
HT-DV50H
HT-DV50H
Basic Operation
General control
To turn the power on
Press the ON/STAND-BY button to turn the power on.
Illumination light control
Press the MEMORY/DIMMER button for more than 2 seconds to
adjust the brightness of the display and volume ring.
adjust the brightness of the display and volume ring.
Auto power off function
In the stop mode of discs/USB operation, the main unit enters the
stand-by mode after 15 minutes of inactivity.
stand-by mode after 15 minutes of inactivity.
Volume auto fade-in
If you turn off and on the main unit with volume set to 34 or
higher, the volume starts at 20 and fades in to the last set level.
If you turn off and on the main unit with the volume level set to less
than 34, the volume starts at the last level volume setting.
higher, the volume starts at 20 and fades in to the last set level.
If you turn off and on the main unit with the volume level set to less
than 34, the volume starts at the last level volume setting.
Volume control
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (+ or –) button to increase or decrease the volume.
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (+ or –) button to increase or decrease the volume.
Subwoofer level control
The subwoofer level can be adjusted.
Notes:
When sound from the subwoofer is distorted, decrease the
subwoofer level.
When changing the subwoofer level, the output level of the
SUBWOOFER PRE OUT is also changed.
subwoofer level.
When changing the subwoofer level, the output level of the
SUBWOOFER PRE OUT is also changed.
Function
When the FUNCTION button on main unit is pressed, the current
function will change to different mode. Press the FUNCTION button
repeatedly to select desired function.
function will change to different mode. Press the FUNCTION button
repeatedly to select desired function.
Note:
The backup function will protect the memorised function mode for a
few hours should there be a power failure or the AC power lead
becomes disconnected.
The backup function will protect the memorised function mode for a
few hours should there be a power failure or the AC power lead
becomes disconnected.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
1
2
3
4
5
6
7
8
9
+10
0
Volume
ring
Volume ring light and display bright
Volume ring light off and display dim
Volume ring light off and display gets dimmer
To increase the level, hold down the
SHIFT button and press the
SUBWOOFER LEVEL + button.
To decrease the level, hold down the
SHIFT button and press the
SUBWOOFER LEVEL - button.
SHIFT button and press the
SUBWOOFER LEVEL + button.
To decrease the level, hold down the
SHIFT button and press the
SUBWOOFER LEVEL - button.
39
MAX
0 1...
+5
-5 -4 ...
+4
DVD/CD
USB
TUNER
OPTICAL 1
OPTICAL 2
AUX IN
SCART
E-29
ENGLISH
HT-DV40H
HT-DV50H
HT-DV50H
Basic Operation
Setting the clock (Remote Control only)
In this example, the clock is set for the 24-hour (0:00) display.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
The time display will appear for about 10 seconds.
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
The time display will appear for about 10 seconds.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the
Press the CLOCK/TIMER button.
Within 10 seconds, press the
or
button to display the time.
The time display will appear for about 10 seconds.
Note:
The “CLOCK” will appear or time will flash to confirm the time
display when the AC power supply is restored after a power failure
or unplugging the unit. If incorrect, readjust the clock as follows.
The “CLOCK” will appear or time will flash to confirm the time
display when the AC power supply is restored after a power failure
or unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform “Setting the clock” from step 1. If the “CLOCK” does not
appear in step 3, step 4 (for selecting the 24-hour or 12-hour
display) will be skipped.
Perform “Setting the clock” from step 1. If the “CLOCK” does not
appear in step 3, step 4 (for selecting the 24-hour or 12-hour
display) will be skipped.
To change the 24-hour or 12-hour display:
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or
button to select
“CLOCK”, and press the MEMORY/DIMMER button.
4
Press the
or
button to select 24-hour or 12-hour
display and then press the MEMORY/DIMMER button.
“0:00”
The 24-hour display will appear.
(0:00 - 23:59)
“AM 12:00”
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
“AM 0:00”
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
1
2
3
4
5
6
7
8
9
+10
0
5
Press the
or
button to adjust the hour and then
press the MEMORY/DIMMER button.
Press the
or
button once to advance the time by 1 hour.
Hold it down to advance continuously.
6
Press the
or
button to adjust the minutes and then
press the MEMORY/DIMMER button.
Press the
or
button once to advance the time by 1
minute. Hold it down to change the time in 5-minute intervals.
1
Clear all the programmed contents. [Refer to “Factory reset,
clearing all memory” on page 63 for details.]
clearing all memory” on page 63 for details.]
2
Perform “Setting the clock” from step 1.
E-30
ENGLISH
8
HT-DV40H
HT-DV50H
HT-DV50H
Basic Operation
Enjoying surround sound (sound mode)
Preset sound modes and sound image
You can enjoy normal stereo sounds.
Enjoy a wide sound field like 5.1ch as
well as enhanced powerful bass
sounds.
well as enhanced powerful bass
sounds.
Suitable for movies, etc.
Easy to listen to bass sounds such as
voice of narration (even at low
volume) due to well-controlled bass
sounds.
voice of narration (even at low
volume) due to well-controlled bass
sounds.
Suitable for news, etc.
Enhanced bass sounds create
clear-cut and spacious sounds at
2.1ch.
clear-cut and spacious sounds at
2.1ch.
Appropriate for music, etc.
Voice of narration comes out from the
centre; you can hear cheers and feel
the atmosphere in the theatre with a
wide sound field like 5.1ch.
Appropriate for sports broadcasting
such as baseball and football.
centre; you can hear cheers and feel
the atmosphere in the theatre with a
wide sound field like 5.1ch.
Appropriate for sports broadcasting
such as baseball and football.
Words are easy to hear and loud
sounds are controlled; even at low
volume, you can enjoy a wide sound
field like 5.1ch.
Suitable for listening to sounds of
movies at low volume.
sounds are controlled; even at low
volume, you can enjoy a wide sound
field like 5.1ch.
Suitable for listening to sounds of
movies at low volume.
Bass frequencies are emphasised.
You can select the BASS level.
You can select the BASS level.
Treble frequencies are emphasised.
You can select the TREBLE level.
You can select the TREBLE level.
Notes:
Subwoofer sound levels for preset sound modes are set to
the recommended levels.
You can adjust a subwoofer sound level by each preset sound
mode (see page 28). Return the settings to default by resetting
(see page 63).
the recommended levels.
You can adjust a subwoofer sound level by each preset sound
mode (see page 28). Return the settings to default by resetting
(see page 63).
E-31
ENGLISH
HT-DV40H
HT-DV50H
HT-DV50H
Basic Operation
Enjoying surround sound (sound mode) (continued)
Preset sound mode
Select any of the 8 preset modes already set to the optimal sound
quality levels.
Select a desired sound mode by pressing the SHIFT and SOUND
MODE buttons simultaneously.
quality levels.
Select a desired sound mode by pressing the SHIFT and SOUND
MODE buttons simultaneously.
Bass control
1. Press the SHIFT and SOUND MODE buttons simultaneously to
select “BASS”.
2. Within 10 seconds, press the VOLUME (+ or –) button to adjust the
bass.
Treble control
1. Press the SHIFT and SOUND MODE buttons simultaneously to
select “TREBLE”.
2. Within 10 seconds, press the VOLUME (+ or –) button to adjust the
treble.
Dolby Virtual Speaker (DVS) sound mode
The Dolby Virtual Speaker (DVS) creates virtual surround sound
comparable to the 5.1ch sound produced by the 2.1ch speaker.
When setting DVS to “ON” for 2 channel stereo signals, Dolby Pro
Logic (see page 32) brings out virtual sound effects through the
signals converted into 5.1ch.
Press the DVS button.
The Dolby Virtual Speaker indicator lights up and set change to DVS
WIDE mode. Press DVS button again to change to DVS
REFERENCE mode.
Press the DVS button again to return to “DVS OFF”.
comparable to the 5.1ch sound produced by the 2.1ch speaker.
When setting DVS to “ON” for 2 channel stereo signals, Dolby Pro
Logic (see page 32) brings out virtual sound effects through the
signals converted into 5.1ch.
Press the DVS button.
The Dolby Virtual Speaker indicator lights up and set change to DVS
WIDE mode. Press DVS button again to change to DVS
REFERENCE mode.
Press the DVS button again to return to “DVS OFF”.
STANDARD
CINEMA
NEWS
SPORT
NIGHT
MUSIC
BASS
TREBLE
Display
Preset sound mode
Notes:
The DVS default setting is “WIDE” mode.
When setting the DVS mode to “WIDE” or “REFERENCE”, the
preset sound mode and Audistry (SOUND SPACE mode, MONO
TO STEREO mode) are cancelled. (The NATURAL BASS mode
and the INTELLIGENT VOLUME mode are not cancelled.)
Monaural signals do not generate surround effects.
In case input signal is Dual mono type and DVS is set to “WIDE”
or “REFERENCE”, the sound may not be output correctly.
When unit is turned on for the first time, selecting BASS
mode using the SOUND MODE button will automatically set the
DVS to OFF. Subsequently, when BASS mode is selected again,
the DVS setting will follow the current user setting.
When headphone is inserted, DVS setting and BASS/TREBLE
setting, set earlier by user will be cancelled. However the DVS
setting will not be recovered when the headphone is unplugged.
When setting the DVS mode to “WIDE” or “REFERENCE”, the
preset sound mode and Audistry (SOUND SPACE mode, MONO
TO STEREO mode) are cancelled. (The NATURAL BASS mode
and the INTELLIGENT VOLUME mode are not cancelled.)
Monaural signals do not generate surround effects.
In case input signal is Dual mono type and DVS is set to “WIDE”
or “REFERENCE”, the sound may not be output correctly.
When unit is turned on for the first time, selecting BASS
mode using the SOUND MODE button will automatically set the
DVS to OFF. Subsequently, when BASS mode is selected again,
the DVS setting will follow the current user setting.
When headphone is inserted, DVS setting and BASS/TREBLE
setting, set earlier by user will be cancelled. However the DVS
setting will not be recovered when the headphone is unplugged.
-5 +5
-5 +5
Click on the first or last page to see other HT-DV50H (serv.man3) service manuals if exist.