Sharp HT-DV50H (serv.man3) User Manual / Operation Manual ▷ View online
E-48
ENGLISH
8
HT-DV40H
HT-DV50H
HT-DV50H
USB Memory Playback
Playback on USB memory device
Playback on USB memory device
You can play USB recorded in JPEG, MP3 and WMA formats.
Note:
This product is not compatible with MTP and AAC file systems.
This product is not compatible with MTP and AAC file systems.
To remove USB memory device
To remove USB memory device
The following functions are the same as DVD or CD operations:
Page
To locate the beginning of a chapter track (skip) . . . . . . . . . . 37
Fast forward/Fast reverse (search) . . . . . . . . . . . . . . . . . . . . . . 37
To start playback from the desired point (direct play) . . . . . . 38
Slow motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
To zoom images (zoom). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
To play the contents between the specified points repeatedly
(A-B repeat) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
To play in the desired order (programmed play) . . . . . . . . . . . 41
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Fast forward/Fast reverse (search) . . . . . . . . . . . . . . . . . . . . . . 37
To start playback from the desired point (direct play) . . . . . . 38
Slow motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
To zoom images (zoom). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
To play the contents between the specified points repeatedly
(A-B repeat) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
To play in the desired order (programmed play) . . . . . . . . . . . 41
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Note:
If USB memory device is not connected, “NO MEDIA” will be shown
on the display.
If USB memory device is not connected, “NO MEDIA” will be shown
on the display.
1
Open the bottom door. Connect the USB device. Press the
(USB )
button.
To select USB function, press the (USB ) button.
2
Press the or button to select data types recorded in
USB memory device.
USB memory device.
3
Press ENTER button to choose folder types.
4
Select desired track to be played back by pressing , ,
or . Then press ENTER or (USB ) button. This
function is only visible when connected to TV.
WMA
1
2
3
4
5
6
7
8
9
+10
0
1
Press the button.
2
Disconnect USB memory device from the USB terminal.
E-49
ENGLISH
HT-DV40H
HT-DV50H
HT-DV50H
USB Memory Playback
To remove USB memory device
(continued)
(continued)
Notes:
SHARP will not be held liable for the loss of data whilst the USB
memory device is connected to the audio system.
Files compressed in MP3 and / or WMA format can be played
back when connected to the USB terminal.
This USB memory’s format support FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory devices will work
on this audio system.
This USB memory cannot be operated via USB hub.
If “UNSUPPORT WMA” is displayed, it means “Copyright
protected WMA file” is selected.
The USB terminal in this unit is not intended for a PC connection
but is used for music streaming with a USB memory device.
The larger the capacity of the USB storage device, the longer it will
take for the data to be read.
Some USB multi-reader devices may not work correctly with the
USB terminal on this unit.
External storage devices cannot be played back using the USB
terminal on this unit.
This unit only supports “MPEG-1 Audio Layer-3” and “MPEG-2
Audio Layer-3” format. (Sampling Frequency is 32, 44.1, 48kHz)
“MPEG-2.5 Audio Layer-3” and MP1, MP2 format are not
supported.
Playlists are not supported on this unit.
The playback time may not be displayed correctly when playing
back a variable bitrate file.
Use only the supplied USB cable.
memory device is connected to the audio system.
Files compressed in MP3 and / or WMA format can be played
back when connected to the USB terminal.
This USB memory’s format support FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory devices will work
on this audio system.
This USB memory cannot be operated via USB hub.
If “UNSUPPORT WMA” is displayed, it means “Copyright
protected WMA file” is selected.
The USB terminal in this unit is not intended for a PC connection
but is used for music streaming with a USB memory device.
The larger the capacity of the USB storage device, the longer it will
take for the data to be read.
Some USB multi-reader devices may not work correctly with the
USB terminal on this unit.
External storage devices cannot be played back using the USB
terminal on this unit.
This unit only supports “MPEG-1 Audio Layer-3” and “MPEG-2
Audio Layer-3” format. (Sampling Frequency is 32, 44.1, 48kHz)
“MPEG-2.5 Audio Layer-3” and MP1, MP2 format are not
supported.
Playlists are not supported on this unit.
The playback time may not be displayed correctly when playing
back a variable bitrate file.
Use only the supplied USB cable.
Advanced USB playback
Repeat play (REMOTE CONTROL ONLY)
Repeat play can play single track and all track sequence
continuously.
continuously.
Whilst a disc is playing, each time the button is pressed, the repeat
mode changes in the following order:
mode changes in the following order:
Random play (REMOTE CONTROL ONLY)
The tracks can be played in random order automatically.
In case of an USB mode:
To random play all tracks:
Press the SHIFT and RANDOM buttons on the remote control so
that random indicator lights up in the display window.
Press the SHIFT and RANDOM buttons on the remote control so
that random indicator lights up in the display window.
1
2
3
4
5
6
7
8
9
+10
0
REP: [REP 1]
REP: [REP DIR]
“1-REPEAT”
“ALL REPEAT”
Repeat the currently
playing track.
playing track.
Repeat the currently
playing directory.
playing directory.
REP: [REP ALL]
REP: [OFF]
“NORMAL”
Repeat the currently
playing USB.
playing USB.
The normal playback.
“FOLD REPEAT”
E-50
ENGLISH
8
HT-DV40H
HT-DV50H
HT-DV50H
Radio Operation
To cancel random playback, press again the SHIFT and RANDOM
buttons, so that the random indicator will disappear.
buttons, so that the random indicator will disappear.
Notes:
If you press the
or
button during random play, you
can move to the track selected next by the random operation.
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
If you press the REPEAT button during random play, playback will
enter repeat mode and random will be cancelled.
In random function, playback will continue until button is
pressed.
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
If you press the REPEAT button during random play, playback will
enter repeat mode and random will be cancelled.
In random function, playback will continue until button is
pressed.
Caution:
After performing repeat, be sure to press the button.
Otherwise, it will play continuously.
After performing repeat, be sure to press the button.
Otherwise, it will play continuously.
Notes:
This unit only supports “MPEG-1 Audio Layer-3” and “MPEG-2
Audio Layer-3” format. (Sampling Frequency is 32, 44.1, 48kHz)
“MPEG-2.5 Audio Layer-3” and MP1, MP2 format are not
supported.
Playback order for MP3 files may differ sometimes depending on
the writing software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
For MP3/WMA files, please put “.MP3” “.WMA” extension. Files
cannot be played back if there is no MP3/WMA extension.
Playlists are not supported on this unit.
This unit only supports MP3 ID3-Tag version 1.x.
The display playback time may not be displayed correctly when
playing back a variable bitrate file.
Copyright protected WMA files cannot be played back.
Audio Layer-3” format. (Sampling Frequency is 32, 44.1, 48kHz)
“MPEG-2.5 Audio Layer-3” and MP1, MP2 format are not
supported.
Playback order for MP3 files may differ sometimes depending on
the writing software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
For MP3/WMA files, please put “.MP3” “.WMA” extension. Files
cannot be played back if there is no MP3/WMA extension.
Playlists are not supported on this unit.
This unit only supports MP3 ID3-Tag version 1.x.
The display playback time may not be displayed correctly when
playing back a variable bitrate file.
Copyright protected WMA files cannot be played back.
Listening to the radio
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER button on the remote control.
3
Press the TUNING (
or
) button to tune in to the
desired station.
Manual tuning:
Press the TUNING ( or ) button as many times as required
to tune in to the desired station.
Auto tuning:
When the TUNING ( or ) button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will stop
at the first receivable broadcast station.
Press the TUNING ( or ) button as many times as required
to tune in to the desired station.
Auto tuning:
When the TUNING ( or ) button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will stop
at the first receivable broadcast station.
1
2
3
4
5
6
7
8
9
+10
0
E-51
ENGLISH
HT-DV40H
HT-DV50H
HT-DV50H
Radio Operation
Listening to the radio (continued)
Notes:
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING ( or ) button again.
When an RDS (Radio Data System) station is tuned in, the
frequency will be displayed first, and then the RDS indicator will
light up. Finally, the station name will appear.
Full auto tuning can be achieved for RDS stations “ASPM”, see
page 53.
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING ( or ) button again.
When an RDS (Radio Data System) station is tuned in, the
frequency will be displayed first, and then the RDS indicator will
light up. Finally, the station name will appear.
Full auto tuning can be achieved for RDS stations “ASPM”, see
page 53.
To receive an FM stereo transmission:
Press the TUNER button to select stereo mode and “ST” indicator
will be displayed.
Press the TUNER button to select stereo mode and “ST” indicator
will be displayed.
“ ” will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER button to extinguish
the “ST” indicator. The reception changes to monaural, and the
sound becomes clearer.
If the FM reception is weak, press the TUNER button to extinguish
the “ST” indicator. The reception changes to monaural, and the
sound becomes clearer.
Memorising a station
Up to 30 stations for FM band can be stored and recalled at the push
of a button. (PRESET ( or ) )
of a button. (PRESET ( or ) )
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead become
disconnected.
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead become
disconnected.
To recall a memorised station
Press the PRESET ( or ) button for less than 0.5 seconds
to select the desired station.
to select the desired station.
To scan the preset stations
The station saved in memory can be scanned automatically. (Preset
memory scan)
memory scan)
To erase entire preset memory
FM stereo receiving indicator
FM stereo mode indicator
1
Perform steps 1 - 3 in “Tuning” on page 50.
2
Press the MEMORY/DIMMER button to enter the preset
tuning saving mode.
tuning saving mode.
3
Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
channel 1.
4
Within 30 seconds, press the MEMORY/DIMMER button to
store that station in memory.
store that station in memory.
If the “MEMORY” and preset number indicators disappear
before the station is memorised, repeat the operation from step
2.
before the station is memorised, repeat the operation from step
2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
preset station.
When a new station is stored in memory, the station previously
memorised for that preset channel number will be erased.
memorised for that preset channel number will be erased.
1
Press the PRESET ( or ) button for more than 0.5
seconds. The preset number will flash and the programmed
stations will be tuned in sequentially, for 5 seconds each.
stations will be tuned in sequentially, for 5 seconds each.
2 Press the PRESET ( or ) button again when the desired
station is located.
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 Press and hold CLEAR/DISPLAY button until "TUNER CLEAR"
2 Press and hold CLEAR/DISPLAY button until "TUNER CLEAR"
appears.
Click on the first or last page to see other HT-DV50H (serv.man3) service manuals if exist.