DOWNLOAD Sharp HT-CN300H Service Manual ↓ Size: 2.66 MB | Pages: 44 in PDF or view online for FREE

HT-CN300H_(E)5.fm

02/5/20

HT-CN300H

„

„

When this product is subjected to strong external interference (mechanical shock,
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.

This operation will erase all data stored in memory and restore various settings to the
initial status (default).

 

This operation will reset all data stored in memory to the initial status (default).

The remote control does not 
operate properly.

z

Is the remote control plugged in?

P. 15

z

Is the battery polarity respected?

P. 18

z

Are the batteries dead?

z

Is the distance or angle incorrect?

P. 18

z

Are there any obstructions in front of 
the remote control sensor?

z

Is the remote control sensor con-
nected to the main unit?

P. 11

z

Is the LEARN/TRANSMIT selector 
switch set to LEARN?

P. 22

z

Is the remote control sensor ex-
posed to strong light (inverter fluo-
rescent light, direct sunlight, etc.)?

P. 18

z

Is the remote control for another 
equipment used simultaneously?

The unit cannot be turned on 
with the remote control.

z

Is the AC power lead of the unit 
plugged in?

P. 15

z

Is the remote control plugged in?

P. 15

z

Are the batteries inserted?

P. 18

Signals are not memorised in 
operation buttons for other 
equipment.

z

Is the remote control plugged in?

P. 15

z

Is the angle or the distance correct 
for memorisation?

P. 22

1

Unplug the unit.

2

Whilst holding down the ON/STAND-BY button, 
plug in the AC power lead.
Release the ON/STAND-BY button when the 
"CLEAR AL" is displayed.

3

Press the ON/STAND-BY button again to turn 
the power on.

1

Move the LEARN/TRANSMIT selector switch to LEARN.

 

The red learn indicator will light up. Though the red and green learn indicators light 
up alternately after approx. 15 seconds, you can go on to the next step.

2

Press the ON/STAND-BY and CLEAR buttons simultaneously for more than 3 
seconds.

 

Initialisation is completed when the red and green learn indicators light up alter-
nately and then the red learn indicator lights up.

3

Move the LEARN/TRANSMIT selector switch to TRANSMIT.

HT-CN300H_(E)5.fm

02/5/20

HT-CN300H

When you load an unplayable disc or fail to perform operations properly, the following
messages are displayed on the unit and the TV screen.

 

„

As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.

„

z

The surround system does not operate properly.

z

Place the unit away from noise source or plug the 
AC power lead to another AC socket. (*)

z

The amplifier is defective or the surround system 
does not operate properly.

z

Place the unit away from noise source or plug the 
AC power lead to another AC socket. (*)

(*): Should the same message appear even if the unit is unplugged and plugged in or 

is set to the stand-by mode and on again, contact your local dealer where you pur-
chased the unit.

Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a 
dry cloth.
 

z

Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the 
cabinet finish.

z

Do not apply oil to the inside of the unit. It may cause malfunctions.

AC 230 - 240 V, 50 Hz

Power on: ** W

Power stand-by: 0.6 W (*)

Width: 230 mm (9-1/8") 
Height: 377 mm (14-7/8") 
Depth: 400 mm (15-3/4")

11.0 kg (24.3 lbs.)

Front speakers, Centre speaker and Surround speakers: 
6 ohms

Monitor output: S-video/video

Video output (Video 1): RCA type

Audio output (Video 1): RCA type (L/R)

Video input (Video 1): RCA type

Audio input (Video 1): RCA type (L/R)

Audio input (Auxiliary): RCA type (L/R)

Video input (Video 2): RCA type

S-video input (DVD): S-terminal

Video input (DVD): RCA type

Audio input (Video 2): RCA type (L/R)

Digital input (DVD): Optical

Digital input (DVD): Coaxial

( * )

This power consumption value is obtained when the demonstration mode is 
cancelled in the power stand-by mode. Refer to page 15 to cancel the dem-
onstration mode.

HT-CN300H_(E)5.fm

02/5/20

HT-CN300H

„

 

„

 

„

 

„

Front speakers:

RMS: ** W (** W + ** W) (10 % T.H.D.)

RMS: ** W (** W + ** W) (0.9 % T.H.D.)

Centre speaker:

RMS: ** W (10 % T.H.D.)

RMS: ** W (0.9 % T.H.D.)

Surround speakers:

RMS: ** W (** W + ** W) (10 % T.H.D.)

RMS: ** W (** W + ** W) (0.9 % T.H.D.)

Subwoofer:

RMS: ** W (10 % T.H.D.)

RMS: ** W (0.9 % T.H.D.)

FM: 87.5 - 108 MHz

AM: 522 - 1,620 kHz

Full Range Speaker System (Magnetic shield)

80 mm (3-1/8") Speaker

Maximum input power 60 W

30 W

6 ohms

Width: 104 mm (4-1/8") 
Height: 110 mm (4-3/8") 
Depth: 123 mm (4-7/8")

0.8 kg (1.8 lbs.)/each

Subwoofer System (Magnetic shield)

160 mm (6-1/4") Woofer

Maximum input power 60 W

30 W

6 ohms

Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replace-
ment, of this product subject to the conditions listed below:-

1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does

not cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with
the product, or repair other than by a Service Facility appointed by Sharp.

2. As this product is intended for private domestic use only, the guarantee will not apply if the product

is used in the course of a business, trade or profession.

3. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its appointed

Service Facility within one year from the date this product was purchased. Proof of purchase must
be provided.

4. The guarantee does not cover carriage costs, jewelled styli, audio tapes, compact discs or batter-

ies.

5. In the unlikely event of this product requiring repair, please contact the supplier from whom it was

purchased. Where this is not possible, please contact the Sharp Customer Information Centre on
the telephone number given below.

6. No person has any authority to vary the terms or conditions of this guarantee.

7. This guarantee is offered as an additional benefit to your statutory rights, and does not affect these

rights in any way.

If you have any difficulty operating this product, or would like information on other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.

Sharp Customer Information Centre - Telephone 08705 274277

(or (01) 676 0648 if telephoning from Ireland)

0204

Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE

9906

TINSE0014BGZZ

02E * HK  1