Sharp HT-CN300H User Manual / Operation Manual ▷ View online
21
HT-CN300H_(E)3.fm
02/5/20
HT-CN300H
Re
mote
C
o
ntr
o
l
- Oper
ation b
u
ttons on the r
e
mote contr
o
l
-
„
Memory 1/2 buttons for other equipment
Memory 1 buttons:
The remote control is set at the factory to operate the Sharp's DVD, TV and VCR.
To operate Sharp products or other companies' equipment that cannot be controlled
by the default remote control, you can memorise their remote control operations
(learn function) (see page 22).
To operate Sharp products or other companies' equipment that cannot be controlled
by the default remote control, you can memorise their remote control operations
(learn function) (see page 22).
Set the MEMORY 1/2 selector switch to MEMORY 1 to use the Memory 1 buttons.
Memory 2 buttons:
No functions are stored at the factory setting. Memorise the remote control signals
(learn function) of your equipment before use (see page 22).
(learn function) of your equipment before use (see page 22).
Set the MEMORY 1/2 selector switch to MEMORY 2 to use the Memory 2 buttons.
Initial setting for Memory 1 buttons:
For details, refer to the operation manual attached to the other equipment.
OPEN
1
2
3
4
13
14
15
16
5
6
7
8
9
19
20
21
10 11 12
22 23 24
18
17
1
TV/VCR
Switches the input to TV or VCR.
Switches the input to TV or VCR.
2
VCR CH
Switches up the VCR channels
Switches up the VCR channels
3
TV VOL
Turns up the TV volume.
Turns up the TV volume.
4
TV CH
Switches up the TV channels.
Switches up the TV channels.
5
TV VOL
Turns down the TV volume.
Turns down the TV volume.
6
TV CH
Switches down the TV channels.
Switches down the TV channels.
7
VCR CH
Switches down the VCR channels.
Switches down the VCR channels.
8
VCR
Pauses VCR.
Pauses VCR.
9
VCR
Rewinds the VCR rapidly.
Rewinds the VCR rapidly.
10 VCR
Advances the VCR rapidly.
11 VCR
Stops the VCR.
12 VCR
Plays the VCR.
13 AUDIO
Switches the DVD sound.
14 SET UP
Changes the DVD settings.
15
Selects the DVD menu
16 DISPLAY
Switches the DVD display.
17
Selects the DVD menu
18 SUB
Switches the subtitle of a DVD.
19 ENTER
Validates the menu.
20
Selects the DVD menu
21 ANGLE
Switches the angle of the DVD images.
22 ZOOM
Zooms the DVD images.
23
Selects the DVD menu
24 TOP
Displays the top menu of the DVD.
22
HT-CN300H_(E)3.fm
02/5/20
HT-CN300H
Re
mote
C
o
ntr
o
l
-
Memor
ising the r
e
mote contr
o
l
b
u
ttons -
Memorising the remote control buttons
You can assign only one function to each button. If you assign two functions to the
button, the newer one will be memorised (learn function).
button, the newer one will be memorised (learn function).
„
Memorising operations in the Memory 2
buttons for other equipment
buttons for other equipment
The same buttons are used for both Memory 1 and 2 operations. To store signals in
Memory 1 buttons, set the MEMORY 1/2 selector switch to MEMORY 1, and for
Memory 2 buttons, set the switch to MEMORY 2.
Memory 1 buttons, set the MEMORY 1/2 selector switch to MEMORY 1, and for
Memory 2 buttons, set the switch to MEMORY 2.
Notes:
z
You cannot store all the button operations by pressing only one button on the
remote control of other equipment. Memorise them one by one.
remote control of other equipment. Memorise them one by one.
z
After storing operation is completed, check that other equipment works correctly
with the remote control.
with the remote control.
z
Some functions cannot be memorised depending on other equipment.
1
Set the MEMORY 1/2 selector switch to MEMORY 2.
2
Move the LEARN/TRANSMIT selector switch to LEARN.
The red learn indicator will light up. Though the red and green learn indicators
light up alternately after approx. 15 seconds, you can go on to the next step.
light up alternately after approx. 15 seconds, you can go on to the next step.
3
Press down the desired button on the remote control for 2 seconds
or more.
or more.
The green learn indicator will flash (the red indicator remains lit).
Lights up
Alternately light up
Lit Flashes
4
Within 10 seconds, press down for more than 2 seconds the de-
sired button on the remote control supplied with other equipment
to send the signal to the marking.
sired button on the remote control supplied with other equipment
to send the signal to the marking.
When the signal is sent to the remote control of the unit, the green indicator will
go off. When memorisation is completed, it will light up.
go off. When memorisation is completed, it will light up.
If the signal is not memorised correctly, the
red learn indicator will flash. Perform the op-
erations from the step 3 again.
red learn indicator will flash. Perform the op-
erations from the step 3 again.
5
Repeat the steps 3 and 4 to memorise other buttons.
6
After memorisation is completed, move the LEARN/TRANSMIT se-
lector switch to TRANSMIT.
lector switch to TRANSMIT.
You can use the remote control.
10˚
Angle and distance
5 cm - 10 cm
(2" - 4")
mark
Goes off
Lit
Lit Lights up
Flashes
23
HT-CN300H_(E)3.fm
02/5/20
HT-CN300H
Re
mote
C
o
ntr
o
l
-
Memor
ising the r
e
mote contr
o
l
b
u
ttons -
Memorising operations in the Memory 1 buttons for other equipment:
Set the MEMORY 1/2 selector switch to MEMORY 1 and perform the steps 2 - 6 in
"Memorising operations in the Memory 2 buttons for other equipment".
"Memorising operations in the Memory 2 buttons for other equipment".
Note:
If a new function is memorised, the default operation on the button will be cleared.
Using the supplied labels:
Main features are already printed on the labels. Write in other operations as you pre-
fer.
fer.
Memorising operations in the operation buttons for other equipment:
1
Move the LEARN/TRANSMIT selector switch to LEARN.
2
Press down the desired button on the remote control for 2 seconds or more.
3
Perform the steps 4 - 6 in "Memorising operations in the Memory 2 buttons for
other equipment".
other equipment".
„
Initialising the remote control buttons
You can delete memorised functions and restore the buttons to the factory settings.
Caution:
You cannot initialise only one button. If initialisation is performed, all the stored func-
tions will be cleared.
tions will be cleared.
Registrable buttons
1
Move the LEARN/TRANSMIT selector switch to LEARN.
The red learn indicator will light up. Though the red and green learn indicators
light up alternately after approx. 15 seconds, you can go on to the next step.
light up alternately after approx. 15 seconds, you can go on to the next step.
2
Press the ON/STAND-BY and CLEAR buttons simultaneously for
more than 3 seconds.
more than 3 seconds.
Initialisation is completed when the red and green learn indicators light up alter-
nately and then the red learn indicator lights up.
nately and then the red learn indicator lights up.
3
Move the LEARN/TRANSMIT selector switch to TRANSMIT.
z
You can use the remote control.
z
Operation buttons and Memory 1 buttons for other equipment will return to the
factory setting.
factory setting.
Lights up
Alternately light up
Alternately light up
Lights up Goes off
24
HT-CN300H_(E)4.fm
02/5/20
HT-CN300H
B
asic Ope
ration
-
S
e
tting the
c
loc
k
-
Setting the clock
By setting the unit on time, you can use it both as a clock and as a timer.
In this example, the clock is set for the 24-hour (0:00) display.
Note:
The "CLOCK" or time will flash at the push of the CLOCK button when the AC power
supply is restored after a power failure or unplugging the unit.
Readjust the clock.
supply is restored after a power failure or unplugging the unit.
Readjust the clock.
To readjust the clock:
Perform "Setting the clock" from step 1. If the time display is flashing, step 3 (for
selecting the 24-hour or 12-hour display) will be skipped.
selecting the 24-hour or 12-hour display) will be skipped.
To change the 24-hour or 12-hour display:
Note:
Setting the clock cancels the demonstration mode automatically.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK button and within 5 seconds, press the ENTER
button.
button.
3
Press the or button to select the 24-hour or 12-hour display and
then press the ENTER button.
then press the ENTER button.
Note that this can only be set when the unit is first installed or it has been reset (see
page 41).
page 41).
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
"AM 0:00"
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
4
Press the or button to adjust the hour and then press the EN-
TER button.
TER button.
z
Press the or button once to advance the time by 1 hour. Hold it down to
advance continuously.
advance continuously.
z
When the 12-hour display is selected, "AM" will change automatically to "PM".
5
Press the or button to adjust the minutes and then press the
ENTER button.
ENTER button.
z
Press the or button once to advance the time by 1 minute. Hold it down
to change the time in 5-minute intervals.
to change the time in 5-minute intervals.
z
The hour will not advance even if minutes advance from "59" to "00".
z
The clock starts from "0" second. (Seconds are not displayed.)
To confirm the time display:
Press the CLOCK button.
The time display will appear for about 5 seconds.
When the unit is set to DVD or VIDEO, the time also ap-
pears on the TV screen.
The time display will appear for about 5 seconds.
When the unit is set to DVD or VIDEO, the time also ap-
pears on the TV screen.
1
Clear all the programmed contents. [Refer to "Clearing all the memory (reset)" on
page 41 for details.]
page 41 for details.]
2
Perform "Setting the clock" from the beginning.
Click on the first or last page to see other HT-CN300H service manuals if exist.