DOWNLOAD Sharp HT-CN300H Service Manual ↓ Size: 2.66 MB | Pages: 44 in PDF or view online for FREE

Model
HT-CN300H
Pages
44
Size
2.66 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio / Home Theatre
File
ht-cn300h.pdf
Date

Sharp HT-CN300H User Manual / Operation Manual ▷ View online

9
HT-CN300H_(E)1.fm
02/5/20
HT-CN300H
Gen
e
ral
 In
fo
rmatio
n
- Contr
o
ls 
and indica
to
rs
 -
 
Front/Centre/Surround speakers
Reference page
1. Full-Range Speaker
2. Angle Adjusting Lever   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3. Label indication
4. Mounting Slot   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5. Speaker Terminals   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6. Mounting Screw Holes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
 
Remote control sensor  
Reference page
1. Remote Sensor   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2. Remote Control Indicator  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3. Remote Sensor Connection Plug   . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Caution:
z
Carefully choose where you place the remote control sensor as the tape adhesive
may damage or peel the surface coating when the tape is removed.
z
Never locate the remote control sensor in an unstable place. Otherwise it may fall.
Note:
Fix the remote control sensor on a flat surface.
1
1
3
2
2
5
Bottom
Front
Side
6
4
3
Front Speaker (right): Red
Front Speaker (left): White
Centre Speaker: Green
Surround Speaker (right): Grey
Surround Speaker (left): Blue
Speaker cushion:
Attach the cushions to the bottom of the speakers to prevent 
them from sliding.
Double-sided tape for remote control sensor:
You can fix the remote control sensor with the supplied tape.
10
HT-CN300H_(E)2.fm
02/5/20
HT-CN300H
Connections
- S
p
e
ake
r connec
ti
o
ns
 -
Speaker connections  
Front speaker
(right)
Front speaker
(left)
Surround speaker
(right)
Main unit
(with subwoofer)
Surround speaker
(left)
Centre
speaker
Grey
Black
Red
Red
Black
White
Red
Black
Grey
Red
Black
Blue
Red
Black
Red
Blue
Green
Green
White
Red
The speaker terminals on the main unit, the tube and plugs of the speaker lead, and speaker labels are distinguished by colours.
Connect the speaker and the unit by matching the colours.
Connect the speaker wires to the speakers first, then to the unit.
Speaker
Main unit
Label
Tube
Black
Red
Recess
Label
Speaker plug
Plug in with the rising side facing up. 
11
HT-CN300H_(E)2.fm
02/5/20
HT-CN300H
Connections
- S
p
eake
r / 
Remote c
o
ntr
o
sensor
 / Ae
ria
l connections 
-
 
 
Remote control sensor con-
nection  
Caution:
z
Hold the connection plug of the remote control sensor when removing it from the
unit. Pulling the lead may cause breakage.
z
Make sure of the top and bottom of the plug when plugging in the remote control
sensor.
Aerial connection  
Note:
Placing the aerial on the unit, or near the AC power lead or the remote sensor may
cause noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
External FM aerial:
Use an external FM aerial if you require better reception. Consult your dealer.
Caution:
z
Only the supplied speakers should be used with this unit.
z
Make sure to connect the speakers after unplugging the unit.
z
Do not mistake   and  , and right and left terminals of the 
speaker leads.
z
Do not let the bare speaker wires touch each other.
z
Do not stand or sit on the speakers. You may be injured.
z
Insert the speaker plug fully with the rising side facing up.
z
Hold the speaker plug when removing it from the unit. Pulling 
the lead may cause breakage.
Connect the plug of the remote 
control sensor and push the plug 
cover until it clicks.
Removing the remote control sensor:
Push the upper and lower sides of the plug cover and take the 
plug off the unit to disconnect the remote control sensor.
Plug cover
Plug
Push
Push
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS 
socket and position the FM aerial wire in the direc-
tion where the strongest signal can be received.
 
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP sock-
et. Position the AM loop aerial for optimum recep-
tion. Place the AM loop aerial on a shelf, etc., or 
attach it to a stand or a wall with screws (not sup-
plied).
< Assembling >
< Attaching to the wall >
Screws
(not supplied)
Wall
External FM aerial
12
HT-CN300H_(E)2.fm
02/5/21
HT-CN300H
Connections
- Connecting other
 equipment -
Connecting other equipment  
To enjoy images or music, connect other equipment to the main unit with the supplied video cable for TV or you can purchase commercially available cables.
TV
Camcorder,
Satellite receiver, etc.
VCR
S-video cable
(See page 13.)
(See page 14.)
(See page 14.)
Video cable
Audio cable
Video cable (supplied)
DVD player
Optical digital audio cable
or
Coaxial digital audio cable
S-video cable
Video cable
Tape deck, etc.
Audio cable
(See page 13.)
(See page 14.)
One video cable and two SCART adaptors are supplied.
Video cable
Audio cable
Video cable
Audio cable
Video cable:
Audio cable:
White (Left)
Red (Right)
White (Left)
Yellow
Yellow
Red (Right)
Page of 44
Display

Click on the first or last page to see other HT-CN300H service manuals if exist.