DOWNLOAD Sharp HT-CN300H Service Manual ↓ Size: 2.66 MB | Pages: 44 in PDF or view online for FREE

HT-CN300H_(E)4.fm

02/5/20

HT-CN300H

„

If sounds from the speakers are uneven, you can equalise them by adjusting the
speaker levels.

Adjust the level of the subwoofer if the sound from it is distorted.

 

„

You can check the sound output from the speakers. (If the speaker levels are not
equalised, they can be adjusted, too.)

 

Whilst the test tone sounds, press the   or   to adjust the level.
You can select a speaker by pressing the   or   button.

If NO (OFF) is selected for a speaker in the speaker size setting, no test tone will be
heard from it.

TV screen

z

You can adjust the level at 1 dB intervals.

z

To adjust the levels of other speakers, repeat the operation from step 3.

z

You can complete the setting operation by pressing the SET UP button twice.

FL

Front speaker (Left)

- 6 dB   + 6 dB

CT

Centre speaker

- 6 dB   + 6 dB

FR

Front speaker (Right)

- 6 dB   + 6 dB

SR

Surround speaker (Right)

- 6 dB   + 6 dB

SL

Surround speaker (Left)

- 6 dB   + 6 dB

SW

Subwoofer

- 10 dB   + 10 dB

The test tone will be heard from each speaker, in order, at about 2-second inter-
vals. 

HT-CN300H_(E)4.fm

02/5/20

HT-CN300H

Timer operation is possible only when the tuner function is selected.

 

„

Set the unit on time (page 24).

If it is not on time, you cannot use the timer function.

Tune in to the desired station. (See page 29.)

Do not turn the volume up too high.

The unit will enter the timer stand-by mode automatically.

HT-CN300H_(E)4.fm

02/5/20

HT-CN300H

z

Playback starts automatically and the volume increases gradually.

z

The unit will enter the power stand-by mode one hour after the timer playback
starts.

Perform "Setting the timer" from the beginning (page 38).

Timer is cancelled by turning the power on whilst in the timer stand-by mode.

z

Once the time is set, the setting will be retained until a new time is entered.

z

The contents of the setting will be erased if the unit is unplugged or a power failure
occurs. In such cases, set the timer again.

z

You can select the other source in the step 2 of "Setting the timer", but this unit
cannot set the timer of other equipment.

z

When in the timer stand-by mode, the X-BASS button does not allow you to enter
the demonstration mode.

 

„

You can set the unit to the power stand-by mode at the specified time.

You can select the other source in the step 1 of "Setting the sleep timer", but this unit
cannot set the sleep timer of other equipment.

Press the TIMER/SLEEP button.

z

The remaining sleep time is displayed for about 5 seconds.

z

You can change the remaining sleep time whilst it is displayed by pressing the
ENTER button (steps 3 - 4).

Press the ON/STAND-BY button whilst the sleep timer is set.
To cancel the sleep timer without setting the unit to the stand-by mode, proceed as
follows.

Tune in to the desired station. (See page 29.)

z

3 hours - 5 minutes   5-minute intervals

z

5 minutes - 1 minute   1-minute intervals

The sleep timer indicator lights up.

The volume will be turned down 1 minute before the sleep operation finishes.

At that time, you cannot change the volume.

1

Press the TIMER/SLEEP button.

2

Within 5 seconds, press the ENTER button.

3

Press the   or   button to select "SLEEP0:00", and press the ENTER button.

HT-CN300H_(E)5.fm

02/5/20

HT-CN300H

Many potential problems can be resolved by the owner without calling a service tech-
nician.
If something is wrong with this product, check the following before calling your author-
ised SHARP dealer or service centre.

„

 

„

 

„

 

„

When a button is pressed, 
the unit does not respond.

z

Set this unit to the power stand-by 
mode and then turn it back on. If the 
unit still malfunctions, reset it.

P. 41

Timer playback does not 
start.

z

Is your unit unplugged, or has the 
power failure occurred? Reset the 
clock.

P. 24

The display on the unit is 
dark.

z

Press the DIMMER button on the re-
mote control.

P. 25

The power is not turned on.

z

Is the unit unplugged?

P. 15

No sound is heard.

z

Is the volume level set to "0"?

P. 25

z

Are the speaker wires disconnect-
ed?

P. 11

z

Is the speaker size set to NO (OFF)?

P. 35

z

Is other equipment connected prop-
erly?

P. 13

The sounds from speakers 
are not well balanced.

z

Are the speaker leads connected to 
the wrong channels?

P. 11

z

Is each speaker placed at the same 
distance from the listener?

P. 16

z

Are speakers adjusted to the same 
level?

P. 37

Noise is heard during play-
back.

z

Move the unit away from any com-
puters or mobile phones.

No images are displayed.

z

Is TV turned on?

P. 20

z

Is the input of TV switched?

P. 20

z

Is TV connected properly?

P. 13

Settings are not displayed on 
the TV screen.

z

The settings will not appear when 
TV is connected with an S-video ca-
ble. Verify on the main unit display.

P. 25

Interference or noise occurs 
on the TV image.

z

Is the unit placed near TV with inter-
nal aerial? Use an external aerial.

Colour variation interference 
shows on the TV image.

z

Are the speakers placed in their 
proper distances? Turn off the TV 
and turn it back on after 15 - 30 min-
utes. If the situation persists, move 
the speakers further away from the 
TV.

P. 16

Radio makes unusual noise 
consecutively.

z

Move the unit away from any com-
puters or mobile phones.

z

Is the FM aerial or AM loop aerial 
placed properly? Move the aerial 
away from the AC power lead if lo-
cated near.

P. 11