Sharp HT-CN300H User Manual / Operation Manual ▷ View online
13
HT-CN300H_(E)2.fm
02/5/22
HT-CN300H
Connections
- Connecting other
equipment -
„
Connecting the TV
Connect the TV to the main unit with the supplied video cable. If your TV has S-video
input socket, connect the commercially available S-video cable to enjoy clearer
images on DVDs.
input socket, connect the commercially available S-video cable to enjoy clearer
images on DVDs.
Notes:
z
Change the TV input in accordance with the connected socket.
z
Do not connect other equipment between the TV and this unit. If they are con-
nected via a VCR, pictures may be distorted.
nected via a VCR, pictures may be distorted.
z
When the video and S-video cables are both connected, the images from the S-
video input socket appears on your TV.
video input socket appears on your TV.
Caution:
The settings appear only when the TV is connected with a video cable. They
will not appear when the TV is connected with an S-video cable.
During the tuner or auxiliary mode, the TV screen display will not be shown.
(See page 25 for the TV screen display.)
will not appear when the TV is connected with an S-video cable.
During the tuner or auxiliary mode, the TV screen display will not be shown.
(See page 25 for the TV screen display.)
Connecting the TV with SCART socket:
Use a supplied SCART adptor.
„
Connecting the DVD player
Use the video cable or the S-video cable for receiving images. The S-video cable can
realise clearer images. For audio, connect with the optical digital cable or the coaxial
digital cable.
realise clearer images. For audio, connect with the optical digital cable or the coaxial
digital cable.
To connect to the video socket with the video cable:
Note:
When connecting a DVD player with a video cable, be sure to use another video
cable for the TV.
cable for the TV.
To connect to the S-video socket with the S-video cable:
Note:
When connecting a DVD player with a S-video cable, be sure to use another S-video
cable for the TV. This unit cannot convert the S-video signal into the video or other
signals.
cable for the TV. This unit cannot convert the S-video signal into the video or other
signals.
Switching the DVD audio input:
Switch the DVD's audio signal with the remote control according to the connected
socket, "DIG1" (optical) or "DIG2" (coaxial) (see page 20).
socket, "DIG1" (optical) or "DIG2" (coaxial) (see page 20).
Caution:
Turn off all other equipment before making this connection.
Notes:
z
Refer to the operation manual of the equipment to be connected.
z
Insert the plugs fully to avoid fuzzy pictures or noise.
TV
Video cable (supplied)
To video input socket
To S-video input socket
S-video cable
L
AUDIO
VIDEO
R
To video input socket
To SCART
socket
SCART adaptor
Video cable (supplied)
IN
TV
Optical digital socket cap:
When using the optical digital socket, remove the cap
first. After using the socket, replace the cap.
first. After using the socket, replace the cap.
Video cable
To video output socket
Optical digital audio cable
Coaxial digital
audio cable
DVD player
To S-video output socket
Optical digital audio cable
Coaxial digital
audio cable
audio cable
DVD player
S-video cable
14
HT-CN300H_(E)2.fm
02/5/22
HT-CN300H
Connections
- Connecting other
equipment -
Connecting other equipment (continued)
„
Connecting the VCR (VIDEO 1)
Notes:
z
Connect the unit and the TV with a video cable. The image of the equipment con-
nected to the VIDEO 1 IN sockets does not appear on the TV even if it is con-
nected with an S-video cable.
nected to the VIDEO 1 IN sockets does not appear on the TV even if it is con-
nected with an S-video cable.
„
Connecting the camcorder, satellite
receiver, etc. (VIDEO 2)
receiver, etc. (VIDEO 2)
Note:
Connect the unit and the TV with a video cable. The image of the equipment con-
nected to the VIDEO 2 IN sockets does not appear on the TV even if it is connected
with an S-video cable.
nected to the VIDEO 2 IN sockets does not appear on the TV even if it is connected
with an S-video cable.
„
Connecting the tape deck, etc. (AUX)
„
Connecting the equipment with SCART
socket
socket
Use a SCART adaptor.
z
The image and sound are not emitted from the VIDEO 1 OUT sockets when the
equipment is connected to the DVD or VIDEO 1 IN sockets.
equipment is connected to the DVD or VIDEO 1 IN sockets.
If connected to the VIDEO 2 IN sockets, they are emitted from the VIDEO 1 OUT
sockets. If connected to the AUX IN sockets or whilst in the tuner mode, only the
sound is emitted.
sockets. If connected to the AUX IN sockets or whilst in the tuner mode, only the
sound is emitted.
Video cable
Video cable
Audio cable
Audio cable
To audio
output sockets
output sockets
To video
output socket
VCR
To audio
input sockets
input sockets
To video
input socket
To audio
output sockets
output sockets
To video
output socket
output socket
Camcorder,
Satellite receiver, etc.
Satellite receiver, etc.
Video cable
Audio cable
To audio output sockets
Tape deck, etc.
Audio cable
Other equipment
L
AUDIO
VIDEO
R
OUT
Video cable
Audio cable
SCART adaptor
To SCART
socket
< Example >
To video
output socket
output socket
To audio
output sockets
Other equipment
L
AUDIO
VIDEO
R
IN
Video cable
Audio cable
SCART adaptor
To SCART
socket
To video
input socket
input socket
To audio
input sockets
15
HT-CN300H_(E)3.fm
02/5/20
HT-CN300H
Connections
-
Con
n
e
c
ti
ng t
o
t
h
e
A
C
soc
ket
-
Connecting to the AC socket
„
Plugging in the main unit
After all connections are made, plug in the unit.
Note:
Unplug the AC power lead from the wall socket if the unit will not be in use for a pro-
longed period of time.
longed period of time.
„
Plugging in the remote control
Notes:
z
You can operate the remote control with batteries (not supplied) in areas where
the AC adaptor lead cannot reach (see page 18).
the AC adaptor lead cannot reach (see page 18).
z
Remove the AC adaptor from the AC socket if the unit will not be in use for a pro-
longed period of time.
longed period of time.
z
Use only the supplied AC adaptor. Another adaptor may cause an electric shock or
fire.
fire.
z
If it is necessary to replace the AC adaptor, replace it with the same type
(RADPA****BGZZ) which is shown on page 5.
(RADPA****BGZZ) which is shown on page 5.
„
Demonstration mode
The first time the unit is plugged in, the unit will enter the demonstration mode. You
will see words scroll.
will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode), press the X-
BASS button. The demonstration mode will be cancelled and the display will disap-
pear.
BASS button. The demonstration mode will be cancelled and the display will disap-
pear.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS button again.
Note:
When the power is on, the X-BASS button can be used to select the extra bass mode
(see page 25).
(see page 25).
„
To turn the power on
Press the ON/STAND-BY button.
To set the unit to stand-by mode:
Press the ON/STAND-BY button again.
Notes:
z
For the operation range and direction of the remote control, see page 18.
z
When turning on the power right after it is set to the stand-by mode, wait a few
seconds.
seconds.
Wall socket
(AC 230 - 240 V, 50 Hz)
To 3.6 V DC
input socket
input socket
Wall socket
(AC 230 - 240 V,
50 Hz)
(AC 230 - 240 V,
50 Hz)
Power indicator
16
HT-CN300H_(E)3.fm
02/5/20
HT-CN300H
Speak
er Ins
talla
tion
- P
la
c
ing t
h
e spe
aker
sy
st
em -
Placing the speaker system
The best surround effect will be achieved by placing each speaker at the same dis-
tance from the listening position.
It is recommended to arrange the speakers as shown below.
tance from the listening position.
It is recommended to arrange the speakers as shown below.
Notes:
z
Place the TV halfway between the front speakers.
z
It is recommended that the centre speaker be placed near the television.
z
Place the surround speakers at a position just above the height of your ears.
The supplied speakers may be placed beside or near the TV as they are magnetically
shielded. However, colour variation may occur, depending on the type of the TV.
shielded. However, colour variation may occur, depending on the type of the TV.
If colour variation occurs...
Turn off the TV (from the power switch).
After 15 - 30 minutes, turn the TV on again.
After 15 - 30 minutes, turn the TV on again.
If the colour variation is still present...
Move the speakers further away from the TV.
Refer to the user's manual of the TV for details.
Refer to the user's manual of the TV for details.
Example of speaker locations:
Main unit
(subwoofer)
Front
speaker (left)
Front
speaker (right)
speaker (right)
Surround
speaker (left)
speaker (left)
Surround
speaker (right)
speaker (right)
Centre
speaker
Front speaker (left)
Same distance
Front speaker (right)
Centre speaker
Same distance
Click on the first or last page to see other HT-CN300H service manuals if exist.