DOWNLOAD Sharp CD-MD3000 (serv.man2) Service Manual ↓ Size: 6.29 MB | Pages: 60 in PDF or view online for FREE

Model
CD-MD3000 (serv.man2)
Pages
60
Size
6.29 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio / System
File
cd-md3000-sm2.pdf
Date

Sharp CD-MD3000 (serv.man2) User Manual / Operation Manual ▷ View online

57
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
References
Troubleshooting Chart (continued)
If trouble occurs (reset)
When this product is subjected to strong external interference (mechanical shock, ex-
cessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is oper-
ated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1. Press the ON/STAND-BY button to enter the power stand-by mode.
2. Whilst pressing down the VOLUME 
X
X
X
X
X
 button, press the ON/STAND-BY but-
ton until “ALL CLEAR” appears.
Caution:
This operation will erase all data stored in memory including clock, timer settings,
tuner preset, and CD or MiniDisc programme.
Condensation
Sudden temperature changes, storage or operation in an extremely humid environ-
ment may cause condensation inside the cabinet (CD pickup, tape heads, etc.) or
on the transmitter on the remote control.
Condensation can cause the unit to malfunction.
If this happens, leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on the transmitter
with a soft cloth before operating the unit.
Before transporting the unit
Remove all CDs and the MiniDisc from the unit. Your unit checks whether there are
any discs inside the unit. “CD NO DISC” and “MD NO DISC” appear if no disc is left.
Then, set the unit to the power stand-by mode. Carrying the unit with discs left inside
can damage it.
58
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
References
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
General
Power source
AC 230 V, 50 Hz
Power consumption
Power on: 180 W
Power stand-by: 0.6 W (*)
Dimensions
Width: 200 mm (7-7/8")
Height: 352 mm (13-7/8")
Depth: 377 mm (14-7/8")
Weight
10.3 kg (22.7 lbs.)
(*) This power consumption value is obtained when the demonstration mode is can-
celled in the power stand-by mode. Refer to page 15 to cancel the demonstration
mode.
Amplifier
Output power
RMS: 200 W (100 W + 100 W) (10 % T.H.D.)
Main speaker (woofer and tweeter); 80 W (40 W + 40 W)
Subwoofer; 120 W (60 W + 60 W)
RMS: 184 W (92 W + 92 W) (0.9 % T.H.D.)
Main speaker (woofer and tweeter); 74 W (37 W + 37 W)
Subwoofer; 110 W (55 W + 55 W)
Output terminals
Speakers: 6 ohms
Headphones: 16-50 ohms (recommended; 32 ohms)
Input terminals
Auxiliary: 500 mV/47 kohms
Digital input (optical)
Maintenance
Cleaning the tape-handling parts
Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean
these parts with a cotton swab moistened with commercial head/pinch roller cleaner
or isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the unit which contains high
voltages.
A
B
C
D
C
D
A
Erase head
C Capstan
B
Recording/Playback head D Pinch roller
After long use, the deck’s heads and capstans may become magnetised, causing
poor sound. Demagnetise these parts once every 30 hours of playing/recording
time by using a commercial tape head demagnetiser. Read the demagnetiser’s
instructions carefully before use.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a
dry cloth.
Caution:
Do not use chemically treated cleaning cloths or other chemicals.
Specifications
59
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
References
CD player
Type
6-disc multi-play compact disc changer player
Signal readout
Non-contact, 3-beam semiconductor laser pickup
D/A converter
1-bit D/A converter
Frequency response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
MiniDisc
Type
MiniDisc recorder
Signal readout
Non-contact, 3-beam semiconductor laser pickup
Rotation speed
400 - 900 rpm CLV, Approx.
Error correction
ACIRC (Advanced Cross Interleave Reed-Solomon
Code)
Quantization
20-bit linear (A/D converter)
Coding
ATRAC (Adaptive Transform Acoustic Coding)
Sampling frequency
44.1 kHz
Recording method
Magnetic modulation overwrite method
Frequency response
20 - 20,000 Hz
D/A converter
1-bit D/A converter
Wow and flutter
Unmeasurable (less than 0.001% W. peak)
Signal/noise ratio
95 dB (1 kHz)
Dynamic range
90 dB (1 kHz)
Audio channel
Stereo: 2 channels
Monaural: 1 channel (playback only)
(long-time recording mode)
Cassette deck
  Frequency response
50-14,000 Hz (Normal tape)
  Signal/noise ratio
50 dB (recording/playback)
  Wow and flutter
0.3 % (WRMS)
Tuner
Frequency range
FM: 87.50-108.00 MHz
AM: 522-1,620 kHz
Speaker
Type
3-way type speaker system
5 cm (2") Tweeter
13 cm (5-1/4") Woofer
13 cm (5-1/4") Subwoofer
Maximum input power (Total)
200 W
Rated input power (Total)
100 W
Impedance
6 ohms
Dimensions
Width: 210 mm (8-1/4")
Height: 392 mm (15-7/16")
Depth: 345 mm (13-9/16")
Weight
5.1 kg (11.2 lbs.)/each
Specifications (continued)
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
TINSE0328AWZZ
A0008.HK
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replace-
ment, of this product subject to the conditions listed below:-
1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does
not cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with
the product, or repair other than by a Service Facility appointed by Sharp.
2. As this product is intended for private domestic use only, the guarantee will not apply if the product
is used in the course of a business, trade or profession.
3. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its appointed
Service Facility within one year from the date this product was purchased. Proof of purchase must
be provided.
4. The guarantee does not cover carriage costs, jewelled styli, audio tapes, compact discs or batter-
ies.
5. In the unlikely event of this product requiring repair, please contact the supplier from whom it was
purchased. Where this is not possible, please contact the Sharp Customer Information Centre on
the telephone number given below.
6. No person has any authority to vary the terms or conditions of this guarantee.
7. This guarantee is offered as an additional benefit to your statutory rights, and does not affect these
rights in any way.
If you have any difficulty operating this product, or would like information on other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.
Sharp Customer Information Centre - Telephone 08705 274277
0008
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
9906
Page of 60
Display

Sharp CD-MD3000 (serv.man2) User Manual / Operation Manual ▷ Download