DOWNLOAD Sharp CD-MD3000 (serv.man24) Service Manual ↓ Size: 159.72 KB | Pages: 1 in PDF or view online for FREE

Model
CD-MD3000 (serv.man24)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
159.72 KB
Type
PDF
Document
Service Manual
Brand
Device
Audio / System / Important servicing notes
File
cd-md3000-sm24.pdf
Date

Sharp CD-MD3000 (serv.man24) Service Manual ▷ View online

– 3 –
CD-MD3000H/CD-MD3000W
Precaution to be taken when replacing and servicing the Laser Pickup.
The AEL (Accessible Emission Level) of Laser Power Output for this model is specified to be lower than Class 1 Requirements.
However, the following precautions must be observed during servicing to protect your eyes against exposure to the Laser
beam.
(1) When the cabinet has been removed, the power is turned on without a compact disc, and the Pickup is on a position outer
than the lead-in position, the Laser will light for several seconds to detect a disc. Do not look into the Pickup Lens.
shipping.
(3) No adjustment to the Laser Power should be attempted when replacing or servicing the Pickup.
(4) Under no circumstances look directly into the Pickup Lens at any time.
(5) CAUTION - Use of controls or adjustments, or performance  of procedures other than those specified herein may result in
hazardous radiation exposure.
(For U.K.)
(Except for U.K.)
WARNINGS
SAFETY PRECAUTION OF CD SECTION FOR SERVICE MANUAL (FOR CD-MD3000H)
Laser Diode Properties
Material: GaAIAs
Wavelength: 780 nm
Emission Duration: continuous
Laser Output: max. 0.6 mW
CAUTION-INVISIBLE  LASER  RADIATION  WHEN  OPEN.  DO  NOT  STARE  INTO 
BEAM  OR  VIEW  DIRECTLY  WITH  OPTICAL  INSTRUMENTS.
VARNING-OSYNLIG  LASERSTRALNING  NAR  DENNA  DEL  AR  OPPNAD.  STIRRA
EJ  IN  I  STRALEN  OCH  BETRAKTA  EJ  STRALEN   MED  OPTISKA  INSTRUMENT.
ADVERSEL-USYNLIG  LASERSTRALING  VED  ABNING.  SE  IKKE  IND  I 
STRALEN-HELLER  IKKE  MED  OPTISKE  INSTRUMENTER.
VARO!  AVATTAESSA  OLET  ALTTIINA  NAKYMATON  LASERSATEILYLLE.
ALA  TUIJOTA  SATEESEEN  ALAKA  KATSO  SITA  OPTISEN  LAITTEEN  LAPI.
VARNING-OSYNLIG  LASERSTRALNING  NAR  DENNA  DEL  AR  OPPNAD.
STIRRA  EJ IN  I  STRALEN  OCH  BETRAKTA  EJ  STRALEN  GENOM  OPTISKT  
INSTRUMENT.
ADVERSEL-USYNLIG  LASERSTRALING  NAR  DEKSEL  APNES.  STIRR IKKE  
INN  I  STRALEN  ELLER  SE  DIREKTE  MED  OPTISKE  INSTRUMENTER.
VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA ALTISTAA
KÄYTTÄJÄN TURVALLISUUSLUOKAN 1 YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE
LASERSÄTEILYLLE.
VARNING - OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I DENNA
BRUKSANVISNING SPECIFICERAS. KAN ANVÄNDAREN UTSÄTTAS FÖR
OSYNLIG LASERSTRÅLNING, SOM ÖVERSKRIDER GRÄNSEN FÖR
LASERKLASS 1.
IMPORTANT SERVICE NOTES (CD-MD3000H FOR U.K. ONLY)
Before returning the unit to the customer after completion of a
repair or adjustment it is necessary for the following withstand
voltage test to be applied to ensure the unit is safe for the
customer to use.
Setting of Withstanding Voltage Tester and set.
Set name
set value
Withstanding Voltage Tester
Test voltage
4,240 VPEAK
3,000 VRMS
Set time
6 secs
Set current (Cutoff current)
4 mA
Unit
Judgment
OK: The “GOOD” lamp lights.
NG: The “NG” lamp lights and the buzzer sounds.
PROBE
AC
OUT
UNIT
SHORT-CIRCUIT
AC POWER
SUPPLY CORD
CONNECT THE PROBE
TO GND OF CHASSIS
SCREW
WITHSTANDING
VOLTAGE TESTER
CHASSIS SCREW
Display

Sharp CD-MD3000 (serv.man24) Service Manual ▷ Download

  • DOWNLOAD Sharp CD-MD3000 (serv.man24) Service Manual ↓ Size: 159.72 KB | Pages: 1 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp CD-MD3000 (serv.man24) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp CD-MD3000 (serv.man24) System. Information contained in Sharp CD-MD3000 (serv.man24) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.