Sharp CD-MD3000 (serv.man2) User Manual / Operation Manual ▷ View online
49
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Advanced Features
■
Timer playback/Timer recording
Before setting the timer:
Whilst the power is in the stand-by mode, press the DISPLAY button
on the remote control to check that the clock is on time.
on the remote control to check that the clock is on time.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the MENU button.
3
Turn the jog dial to select “TIMER PLAY” or “TIMER REC” mode
and within 10 seconds, press the ENTER button.
and within 10 seconds, press the ENTER button.
For timer playback:
For timer recording:
4
“ PLAY” or “ REC” will flash for 5 seconds.
Press the ENTER button during the flash.
or
5
Turn the jog dial to specify the hour to start and within 10 sec-
onds, press the ENTER button.
onds, press the ENTER button.
●
The illustrations show the timer playback setting.
Timer and Sleep Operation
Timer playback:
The unit turns on and plays the desired source (CD, MD, tuner, tape) at the
preset time. At the end time, the unit enters the power stand-by mode auto-
matically.
Timer recording:
The unit turns on and starts recording from the tuner at the preset time.
At the end time, the unit enters the power stand-by mode automatically.
The unit turns on and plays the desired source (CD, MD, tuner, tape) at the
preset time. At the end time, the unit enters the power stand-by mode auto-
matically.
Timer recording:
The unit turns on and starts recording from the tuner at the preset time.
At the end time, the unit enters the power stand-by mode automatically.
Continued to the next page
50
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Advanced Features
6
Turn the jog dial to specify the minute and within 10 seconds,
press the ENTER button.
press the ENTER button.
7
Turn the jog dial to specify the hour to stop and within 10 sec-
onds, press the ENTER button.
onds, press the ENTER button.
8
Turn the jog dial to specify the minute and within 10 seconds,
press the ENTER button.
press the ENTER button.
Timer play: Go to step 10.
Timer recording: Go to step 9.
Timer recording: Go to step 9.
9
For timer recording, turn the jog dial to select “MD REC” or “TAPE
REC” and within 10 seconds, press the ENTER button.
REC” and within 10 seconds, press the ENTER button.
10
Adjust the volume using the VOLUME buttons.
●
Do not turn the volume up too high.
11
Press the CD, MD, TUNER (BAND) or TAPE button to select the
desired function.
desired function.
To select the timer playback source : CD, MD, TUNER (BAND) or TAPE.
To select the timer recording source : TUNER (BAND).
To select the timer recording source : TUNER (BAND).
Timer and Sleep Operation (continued)
Start time
End time
12
Press the ON/STAND-BY button to enter the timer stand-by mode.
To cancel the timer playback/timer recording:
1. Press the ON/STAND-BY button to turn the power on.
2. Press the MENU button.
3. Turn the jog dial to select “TIMER OFF” and then press the ENTER button.
2. Press the MENU button.
3. Turn the jog dial to select “TIMER OFF” and then press the ENTER button.
To check the setting time:
1. Press the ON/STAND-BY button to turn the power on.
2. Press the MENU button.
3. Turn the jog dial to select “TIMER PLAY” or “TIMER REC” and then press
2. Press the MENU button.
3. Turn the jog dial to select “TIMER PLAY” or “TIMER REC” and then press
the ENTER button.
4. Press the ON/STAND-BY button to enter the timer stand-by mode.
13
When the preset time is reached, playback or recording will start.
●
The volume will increase gradually until it reaches the volume you were lis-
tening to before your system enters the timer stand-by mode.
tening to before your system enters the timer stand-by mode.
14
When the timer end time is reached, the system will enter the
power stand-by mode automatically.
power stand-by mode automatically.
●
If you press the CD MD, TRACK EDIT or MENU button during timer opera-
tion, the timer mode will be cancelled and playback or recording will last
even when the end time is reached.
tion, the timer mode will be cancelled and playback or recording will last
even when the end time is reached.
Notes:
●
The system will be turned on 15 seconds (no operation can be accepted during that
time.) before the timer playback and recording preset time to prepare for them.
Actual playback and recording will start from the set time.
time.) before the timer playback and recording preset time to prepare for them.
Actual playback and recording will start from the set time.
●
When performing timer playback or recording using another unit connected to the
AUX IN or DIGITAL IN sockets, press the AUX button to select “AUX” or “AUX OPT”
in step 11. At this time, only this stereo system will be turned on or enter the power
stand-by mode automatically. (Another unit will not be turned on or turned off.)
AUX IN or DIGITAL IN sockets, press the AUX button to select “AUX” or “AUX OPT”
in step 11. At this time, only this stereo system will be turned on or enter the power
stand-by mode automatically. (Another unit will not be turned on or turned off.)
To change the setting time:
Perform “Timer playback/Timer recording” from the beginning.
51
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Advanced Features
Timer and Sleep Operation (Continued)
■
Sleep operation
The radio, CDs, MiniDisc and cassette tape can all be turned off automatically.
1
Play back the desired sound source.
2
Press the MENU button.
3
Turn the jog dial to select “SLEEP”.
Then press the ENTER button.
Then press the ENTER button.
To change the sleep time:
Whilst the sleep time is displayed, turn the jog dial.
(Maximum: 2 hours - Minimum: 30 minutes)
(Maximum: 2 hours - Minimum: 30 minutes)
4
Press the ENTER button.
5
Your system will enter the power stand-by mode automatically
after the preset time has elapsed.
after the preset time has elapsed.
●
The volume will be turned down when the sleep operation finishes.
Note:
Once the sleep time is set, it will remain unchanged until the setting is changed.
Once the sleep time is set, it will remain unchanged until the setting is changed.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst sleep operation is performed.
To confirm the remaining sleep time:
Perform the above steps 2 - 3.
This time you can also change the sleep time.
This time you can also change the sleep time.
■
To use timer and sleep operation together
Example: To fall asleep and wake to the same radio station
You can play back the same source only (the function cannot be switched).
You can play back the same source only (the function cannot be switched).
1
Set the desired playback or recording time (steps 1 - 9, pages 49
- 50).
- 50).
2
Whilst playing the desired source, set the sleep time (see left,
steps 1 - 4).
steps 1 - 4).
1.Timer playback (recording) setting
2.Sleep timer setting
2.Sleep timer setting
Timer playback
(recording) start time
(recording) start time
30 minutes - 2 hours
Desired time
Sleep operation will
automatically stop.
automatically stop.
An interval of 3 minutes
or more is required.
or more is required.
End time
52
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Advanced Features
Enhancing Your Stereo System
The connection lead is not included. Purchase a commercially available lead as shown below.
Red
White
Red
White
RCA lead
VCR
To the line
output socket
output socket
MD deck, digital tuners
or DAT decks
or DAT decks
To the optical line
output socket
output socket
Connection cable
for digital recording
for digital recording
Click on the first or last page to see other CD-MD3000 (serv.man2) service manuals if exist.