DOWNLOAD Sharp CD-MD3000 (serv.man2) Service Manual ↓ Size: 6.29 MB | Pages: 60 in PDF or view online for FREE

Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)

Press the 

06

 button.

To resume playback from the same point, press the 

06

 button again.

Press the 

■

 button.

Whilst in the stop mode, press the MD

7

 button.

Press the ON/STAND-BY button to enter the power stand-by mode.

●

If TV or radio interference occurs during MiniDisc operation, move the unit away

from the TV or radio.

●

Although MiniDiscs will not normally skip due to vibration, you may hear skipping in

the sound if there is continuous vibration.

If the volume is turned up too high, sound skipping may occur depending on the

contents of the MiniDisc.

If this happens, turn the volume down and the skipping should stop.

●

If an error message is displayed during MiniDisc operation, see “Error Messages”

on page 55.

Note:
When the monaural-recorded (long-play recorded) MiniDisc is played, “MONO LP” will
be displayed.

■

To move to the beginning of the next track:
Turn the jog dial slowly clockwise by one position during playback.

To restart the track being played:
Turn the jog dial slowly anti-clockwise by one position during playback.

Note:
The 

5

 or 

4

 button on the remote control allows you to locate the beginning of a

track.

■

For audible fast forward:
Press and hold down the 

2

 button during playback.

For audible fast reverse:
Press and hold down the 

3

 button during playback.

●

Normal playback will resume when the 

3

 or 

2

 button is released.

●

When the end of the last track is reached during fast forward, “DISC END” will
appear in the display and MiniDisc operation will be paused. When the beginning of
the first track is reached during fast reverse and the 

3

 button is released, the unit

will enter the playback mode.

●

You can skip to any track by turning the jog dial until the
desired track number appears.

●

You can skip to any track by turning the jog dial until the
desired track number appears.

Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)

Up to 32 CD tracks or 20 MD tracks can be programmed.
You cannot programme CD and MiniDisc tracks together at the same time.

(CD operation)
 Whilst  in the stop mode, press the CD button.
(MiniDisc operation)
 Whilst  in the stop mode, press the MD button.

CD operation: Go to step 3.
MD operation: Go to step 4.

5

5

5

5

5

4

4

4

4

4

■

06/D 

06/D 

06/D 

06/D 

06/D 

●

At this time, playback will not begin even if one of the DISC 1 - DISC 6
buttons is pressed of the CDs. (When CD programmed play.)

Press the CLEAR button whilst the “MEMORY” indicator is flashing.

●

Each time the button is pressed, one track will be cleared,
beginning with the last track programmed.

Whilst in the stop mode, press the CLEAR button. The “MEMORY”
indicator will disappear and all the programmed content will be
cleared.

If a programme has been previously stored, the “MEMORY” indicator will be displayed.
Then follow steps 2 - 7 to add additional tracks. The new tracks will be stored after the
last track of the original programme.

Whilst the unit is stopped in the programmed play mode, press the 

5

 or 

4

 button.

●

Opening any tray of the programmed discs or ejecting a MiniDisc automatically

cancels the programmed sequence.

●

Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD or MD to another function, the programmed selections will not
be cleared.

●

During programme operation, random play is not possible.

Selected disc number

Playback order

Selected track number

Playback time

Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)

You can select one of the CD or MD playback mode; “Repeat play”, “Random play”
and “Normal play”.

    

(CD operation)
  Press the 

06

06

06

06

06

●

If playback is started by pressing the 

06

 button, repeat or random play will

be performed on all discs.

●

If playback is started by pressing one of the DISC 1 - DISC 6 buttons, repeat
or random play will be performed on that disc.

(MiniDisc operation)
  Press the 

06

06

06

06

06

Perform steps 1 - 6 in the “Programmed Play” section and then select the repeat playback.

●

After using repeat play, be sure to press the 

■

 button. Otherwise, the disc(s) will

play continuously.

●

CD random play will be repeated until the 

■

 button is pressed.

MD random play will stop automatically when all tracks are played once.
(The same track will not be played back twice.)

●

In random play, the CD or MiniDisc player will select and play tracks automatically.
(You cannot select the order of the tracks.)

Press the PLAY MODE button repeatedly to select the normal playback mode.

Each time the TIME button on the remote control is pressed during playback or in the
pause mode, the display will change.

You can play a disc by specifying the disc number.

●

Only the chosen disc will be played and stopped automatically.

Note:
When one of the DISC 1 - DISC 6 buttons is green, it is ready to play that disc.
If there is not a disc on the tray, playback will not begin and the button will turn dark.

To stop playback:
Press the 

■ 

button.

Selected disc number

●

During random play, the total remaining playing time will not be displayed.

●

Depending on the CD or MiniDisc, the playing time display may not match the total
playing time which is indicated on the CD or MiniDisc jacket, as the time between
tracks is not included.

Normal playback mode

Random playback mode

Repeat playback mode

Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)

7

7

7

7

7

7

06

06

06

06

06

1

1

1

1

1

●

To play both sides (

), start from side A. When playback starts from side B,

side A will not be played.

●

To play side B using the remote control, press the 

■

 button to switch the

playback side. Then, press the 

06/D

  button.

Press the 

■

 button.

To advance the tape, press the 

2

 button.

To rewind it, press the 

3

 button.

To advance the tape, press the 

3

 button.

To rewind it, press the 

2

 button.

●

To remove the cassette, press the 

■

 button, and then open the compartment.

●

If a power failure occurs during tape operation, the tape head will remain engaged
with the tape and the cassette door will not open. Wait until power is restored.

●

Even if the 

06 

button is pressed during tape playback, the unit will not enter the

pause mode.

... To listen to both sides.
... For endless repeat play of both sides.
... To listen to one side.