Sharp AE-XM24CR (serv.man17) Service Manual ▷ View online
61
AY-XM7/9/12CR
AY-XPM7/9/12CR
AE-XM18/24CR
AY-XPM7/9/12CR
AE-XM18/24CR
16. Remove 3 screws fixing the control box,and remove
the control box.
17. Remove a screw fixing the drain pan.
18. Pull the drain pan toward you.
19. Remove the drain cover from the evaporator.
Note:
During reassembly, verify that the dew on
the pipe is led to the drain pan.
20. Remove 4 screws fixing the evaporator.
21. Remove the evaporator from the cabinet.
22. Remove 3 screws fixing the motor cover, and pull up
the fan.
23.Loose a screw fixing fan.
62
AY-XM7/9/12CR
AY-XPM7/9/12CR
AE-XM18/24CR
AY-XPM7/9/12CR
AE-XM18/24CR
DISASSEMBLING PROCEDURE
FOR INDOOR UNIT [AY-XM7CR/9CR/12CR]
CAUTION : DISCONNECT THE UNIT FROM THE POWER SUPPLY BEFORE ANY SERVICING
1. Open the opne panel, and remove 2 air filters.
2. Remove 4 screws fixing the front panel.
3. Remove the screw fixing the cord clamp.
Note :
During reassembly, install the holder after installing the
front panel. This will make it
easier to assemble the front panel.
Note :
During reassembly, install the holder after installing the
front panel. This will make it
easier to assemble the front panel.
4. Close the open panel. Pushing the nail of the front
panel.
5. Pull the front panel up.
6. Remove the unit-to-unit wiring from the terminal
board.
7. Remove a screw fixing the control box cover, and
remove it.
8. Remove 2 screws fixing the 2 ground wiredfs and
terminal.
Note :
During reassembly, take care direction of the lead wires.
During reassembly, take care direction of the lead wires.
63
AY-XM7/9/12CR
AY-XPM7/9/12CR
AE-XM18/24CR
AY-XPM7/9/12CR
AE-XM18/24CR
NOTE : In case of AY-XM7CR, AY-XM9CR
9-1.Cut off 2 fixing bands.
2During reassembly, fix them by fixing bands as same
certainly.
certainly.
NOTE : In case of AY-XM12CR
9-2.Cut off 3 fixing bands.
During reassembly, fix them by fixing bands as same
certainly.
certainly.
10. Remove 2 thermistors of the evaporator and the pipe.
11.Remove 4 conectors.
CN1
CN6
CN3
CN2
12. Remove the thermistor holder from the evaporator.
13.Remove the display from the drain pan.
14. Remove the screw fixing the pipe holder.
15. Remove 3 screws fixing the control box,and remove
the control box.
16. Remove a screw fixing the drain pan.
64
AY-XM7/9/12CR
AY-XPM7/9/12CR
AE-XM18/24CR
AY-XPM7/9/12CR
AE-XM18/24CR
17. Pull the drain pan toward you.
18. Remove the drain cover from the evaporator.
Note:
During reassembly, verify that the dew on
the pipe is led to the drain pan.
19. Remove 4 screws fixing the evaporator.
20. Remove the evaporator from the cabinet.
21. Remove 3 screws fixing the motor cover, and pull up
the fan.
22.Loose a screw fixing fan.
Click on the first or last page to see other AE-XM24CR (serv.man17) service manuals if exist.