Sharp AE-XM24CR (serv.man16) Service Manual ▷ View online
73
AY-XM7/9/12CR
AY-XPM7/9/12CR
AE-XM18/24CR
AY-XPM7/9/12CR
AE-XM18/24CR
OPTION
HOW TO REPLACE THE AIR PURIFYING FILTER (AZ-F900B;
Electrostatic Type
(2-sheet package)
)
(only for models AY-XM7CR/AY-XM9CR/AY-XM12CR)
Precautions
The filters are sealed in a plastic bag to keep thier dust collection effect. Do not open the bag until using the
filters. (Otherwise the filters’ life may get shorter.)
Do not expose the filters to direct sunlight.
(Otherwise they may deteriorate.)
The filters are sealed in a plastic bag to keep thier dust collection effect. Do not open the bag until using the
filters. (Otherwise the filters’ life may get shorter.)
Do not expose the filters to direct sunlight.
(Otherwise they may deteriorate.)
1. REMOVE THE AIR FILTERS.
1) Open the open panel
2) Push the air filter up slightly to unhook them.
1) Open the open panel
2) Push the air filter up slightly to unhook them.
2. CHECK THE AIR PURIFYING FILTERS.
1) Take of the old air purifying filters from the air filters. Snap out in the arrow marked direction.
2) Set the new air purifying filters with filter stopperts located on the air filters.
1) Take of the old air purifying filters from the air filters. Snap out in the arrow marked direction.
2) Set the new air purifying filters with filter stopperts located on the air filters.
3. REINSTALL THE AIR FILTERS
1) Reinstall the air filters in the original positions.
2) Close the open panel.
3) Push the center part of the panel firmly to lock it in place.
1) Reinstall the air filters in the original positions.
2) Close the open panel.
3) Push the center part of the panel firmly to lock it in place.
REPLACEMENT INTERVALS GUIDELINE
Replace the air purifying filters at the intervals of 3-6 months.
The dirty filters are not washable for reuse.
The filters are available at your nearest dealer.
The filters are available at your nearest dealer.
1
2
3
3
1
2
;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;
Filter stoppers
74
AY-XM7/9/12CR
AY-XPM7/9/12CR
AE-XM18/24CR
AY-XPM7/9/12CR
AE-XM18/24CR
Service label for AE-XM24CR
Service label for AE-XM18CR
Mounting position of thermistors and expansion valves
Mounting position of thermistors and expansion valves are shown below.
Thermistor
Thermistor
Check the cord color of thermistor before mounting.
Thermistor Suction, Suction A, Suction B, Suction C are mounted on GAS side pipes.
Thermistor Heat exchanger is mounted on LIQUID side pipe.
Thermistor Suction, Suction A, Suction B, Suction C are mounted on GAS side pipes.
Thermistor Heat exchanger is mounted on LIQUID side pipe.
Expansion valve
Check the labels before connecting to the Control Board Unit.
CAUTION
Mismounting and misconnecting will cause error or failure.
Thermistor Suction B (White)
Thermistor Heat exchanger (Orange)
Thermistor Suction A (Blue)
Thermistor Suction (Black)
Thermistor Suction C (Brown)
Label
Connector label
Expansion valve C
Label
Expansion valve B
Label
Expansion valve A
B
A
Expansion valve
Thermistor
Outdoor temp.
Suction
Suction A
Suction B
Suction C
Heat exchanger
Compressor
C
C252
Mounting position of thermistors and expansion valves
Mounting position of thermistors and expansion valves are shown below.
Thermistor
Thermistor
Check the cord color of thermistor before mounting.
Thermistor Suction, Suction A, Suction B are mounted on GAS side pipes.
Thermistor Heat exchanger is mounted on LIQUID side pipe.
Thermistor Suction, Suction A, Suction B are mounted on GAS side pipes.
Thermistor Heat exchanger is mounted on LIQUID side pipe.
Expansion valve
Check the labels before connecting to the Control Board Unit.
CAUTION
Mismounting and misconnecting will cause error or failure.
Thermistor Suction A (Blue)
Thermistor Heat exchanger (Orange)
Thermistor Suction (Black)
Thermistor Suction B (White)
Label
Expansion valve B
Label
Expansion valve A
B
A
Expansion valve
Thermistor
Outdoor temp.
Suction
Suction A
Suction B
Heat exchanger
Compressor
Connector label
C262
Display