Panasonic TY-ST42PT1E / TY-ST42PT1U / TY-ST42PW1E / TY-ST42PW1U / TY-ST42PF1E / TY-ST42PF1U / TY-WK42PV1E / TY-WK42PV1U / TY-WK42PR1E / TY-WK42PR1U Service Manual / Other ▷ View online
5-
5
Fixing the insulating spacers to the display
unit
unit
1
Spread a clean cloth over a level floor or base, and place on it the dis-
play unit face down.
play unit face down.
Remove the four screws from the display unit.
2
Use the accessory tool "Allen key" to install the four accessory
,
and
into the holes.
Place the display unit
face down on the cloth
clean and free from
other foregin particles,
and then proceed to the
next step.
face down on the cloth
clean and free from
other foregin particles,
and then proceed to the
next step.
Pan head bolt with
hex socket
hex socket
Toothed pan washer
Insulating spacer
5-
6
Attaching the display unit to the wall-
hanging bracket
hanging bracket
1
Lift the display unit so that the upper insulating spacers at the back
may fit into the notched indentation at the top of the wall-hanging
bracket, and then lower the display unit into place.
may fit into the notched indentation at the top of the wall-hanging
bracket, and then lower the display unit into place.
2
After that, lift the display unit slightly and insert the lower insulating
spacers at the back of the display unit into the lower cutouts in the
wall-hanging bracket.
spacers at the back of the display unit into the lower cutouts in the
wall-hanging bracket.
3
Then lower the display unit into the lower notched part of the cutouts.
4
Insert and fasten the
screws at both the left and right sides.
Do not lift the display
too high or it may come
out of the notches in the
upper indentations.
too high or it may come
out of the notches in the
upper indentations.
Fixing screws
Insulating spacer
1
2
3
To prevent the display
unit from becoming
detached from the wall-
hanging bracket, make
sure that the left and
right fixing screws are
unit from becoming
detached from the wall-
hanging bracket, make
sure that the left and
right fixing screws are
properly fitted.
Fixing screw (M5-35)
Wall-hanging bracket
Fixing screws mounts
Fixing screws(left and right)
5-
7
Removing the display unit
1
Remove the two fixing screws from the sides of the wall-hanging
bracket.
bracket.
2
1) Lift the display unit slightly;
2) At the same time, pull the bottom half way to detach the lower insu-
lating spacers;
3) Lift the display away from the wall-hanging bracket.
Fixing screws
Insulating spacer
(left and right)
3)
1)
2)
Matsushita Electric Industrial Co.,Ltd
Central P.O.Box 288, Osaka 530-8692, Japan