Panasonic TY-ST42PT1E / TY-ST42PT1U / TY-ST42PW1E / TY-ST42PW1U / TY-ST42PF1E / TY-ST42PF1U / TY-WK42PV1E / TY-WK42PV1U / TY-WK42PR1E / TY-WK42PR1U Service Manual / Other ▷ View online
2-
5
2
Remove the four screws.
3
As shown in the illustration, use the supplied "Allen key" to fasten the
screw through
screw through
and
, then screw the four
to the display unit.
Pan head bolt with
hex socket
hex socket
Toothed pan washer
Insulating spacer
2-
6
Attaching the wall stand to the display unit
1
Insert the two poles at the top of the wall pedestal into the holes in the
base of the display unit as shown in the illustration.
base of the display unit as shown in the illustration.
2
Insert the four
screws, two on either side, into the holes in the back
of the display unit and fasten them into the holes in the inserted poles.
The screws and covers
may be required later if
the display unit is moved
and mounted directly to
a wall, so keep them in
a safe place so that they
may be required later if
the display unit is moved
and mounted directly to
a wall, so keep them in
a safe place so that they
will not get lost.
Assembly screw
(M5-30) x 4
(M5-30) x 4
2-
7
Fixing the display unit to the wall
1
Lift the display so that the upper insulating spacers at the back may fit
into the notched indentation at the top of the holding bracket, and then
lower the display into place.
into the notched indentation at the top of the holding bracket, and then
lower the display into place.
2
1) Lift the display slightly and insert the lower insulating spacers at the
back of the display unit into the lower cutouts in the holding bracket.
2) Lower the display into the lower notched part of the cutouts.
3
Insert and fasten the
screws at both the left and right sides.
Do not lift the display
too high or it may come
out of the notches in the
upper indentations.
too high or it may come
out of the notches in the
upper indentations.
To prevent the display
unit from becoming
detached from the
holding bracket, make
sure that both the left
and right fixing screws
unit from becoming
detached from the
holding bracket, make
sure that both the left
and right fixing screws
are properly fitted.
Fixing screw(M5)
Holding bracket
Fixing screws(left and right)
2-
8
Removing the display unit
1
Remove the two fixing screws from the sides of the holding bracket.
2
1) Lift the display slightly;
2) Pull the bottom half way to detach the lower insulating spacers;
3) Lift the display away from the holding bracket.
Fixing screws
(left and right)
(left and right)
Insulating space
1)
2)
3)
Click on the first or last page to see other TY-ST42PT1E / TY-ST42PT1U / TY-ST42PW1E / TY-ST42PW1U / TY-ST42PF1E / TY-ST42PF1U / TY-WK42PV1E / TY-WK42PV1U / TY-WK42PR1E / TY-WK42PR1U service manuals if exist.