Panasonic TY-ST42PT1E / TY-ST42PT1U / TY-ST42PW1E / TY-ST42PW1U / TY-ST42PF1E / TY-ST42PF1U / TY-WK42PV1E / TY-WK42PV1U / TY-WK42PR1E / TY-WK42PR1U Service Manual / Other ▷ View online
3-
1
Mobile stand
TY-ST42PF1E
TY-ST42PF1U
CONTENTS
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-
2
Instruction of the installation . . . . . . . . . . . . 3-
3
1.Assembling the mobile stand
. . . . . . . . . . . . . . . . 3-
3
2.Fixing the display unit to the stand
. . . . . . . . . . . . . 3-
4
3.Fixing the wiring
. . . . . . . . . . . . . . . . . . . . . . . . . 3-
5
Removing the display unit . . . . . . . . . . . . . . . 3-
6
Assembly diagram
3-
2
Description
Installation diagram
650
15
400
89
1030
1030
820
633.5
1760
Units : mm
3-
3
Instruction of the installation
Assembling the mobile stand
1
Insert the supprots into the slots on the upper side of stand base, and
then fix them from below using the four
then fix them from below using the four
bolts.
2
Slide the shelf, with the supports in the slots, down to the required
height. Choose the locations of stopper holes to match the required
height. Then fix the shelf using the four
height. Choose the locations of stopper holes to match the required
height. Then fix the shelf using the four
screws and spring washers.
3
Insert the holder into the supports, and fix it with the four
screws.
When installing the stand,
provisionally fasten all
bolts and screws first,
and then fasten them to
provisionally fasten all
bolts and screws first,
and then fasten them to
complete the assembly.
Bolt (M8)
Front
Support
Choose the locations of
the stopper holes to
match the required height.
1) height of 500 mm
the stopper holes to
match the required height.
1) height of 500 mm
2) height of 350 mm
Assembly screw (M6-16)
and spring washer x 4 each
and spring washer x 4 each
1)
2)
Be sure to assemble on a
stable horizontal surface.
Assembly screw(M5-15)
3-
4
Fixing the display unit to the stand
1
1) Spread a clean cloth over a level floor or base, and place on it the
display unit face down.
2) Remove the screws and covers.
Keep them in a safe place for possible future use.
2
Insert the two poles at the top of the stand into the holes in the base of
the display unit as shown in the illustration below.
the display unit as shown in the illustration below.
3
Insert the four
screws, two on each side, into the holes in the back of
the display unit and fasten them into the holes in the inserted poles.
Lock the casters before
installing the display unit.
Press down the caster
switch to lock the caster.
installing the display unit.
Press down the caster
switch to lock the caster.
Assembly screw (M5-30)
Click on the first or last page to see other TY-ST42PT1E / TY-ST42PT1U / TY-ST42PW1E / TY-ST42PW1U / TY-ST42PF1E / TY-ST42PF1U / TY-WK42PV1E / TY-WK42PV1U / TY-WK42PR1E / TY-WK42PR1U service manuals if exist.