Panasonic TX-43P800X / TX-43P800HM / TX-43P800HQ / TX-43P800HZ / TX-51P800X / TX-51P800HM / TX-51P800HQ Service Manual ▷ View online
10.3.1 Green Coarse Convergence
Adjustment
Adjustment
TOP
PREVIOUS
NEXT
10.3.1.1 Reparation
Push the "SOUND" button, and select the Green Adjustment mode.Push the "2" button, and select the
"Border and Cross" pattern.Push the "MUTE" button, and select the "Green" colour.
"Border and Cross" pattern.Push the "MUTE" button, and select the "Green" colour.
10.3.1.2 "G-SIZE (V)" adjustment
Push the "TV/AV" buttons, and select the "G-SIZE (V)".Push the "Channel up/down" buttons, and
adjust the upper and lower boarder line of test pattern is aligned with the edge of the screen frame.
adjust the upper and lower boarder line of test pattern is aligned with the edge of the screen frame.
10.3.1.3 "G-SIZE (H)" adjustment
Push the "TV/AV" buttons, and select the "G-SIZE (H)".Push the "Volume up/down" buttons, and
adjust the boarder line on either side of test pattern is aligned with the edge of the screen frame.
adjust the boarder line on either side of test pattern is aligned with the edge of the screen frame.
10.3.1.4 "G-LINEAR" adjustment
Push the "TV/AV" buttons, and select the "G-LINEAR".Push the "Volume up/down" buttons, and
adjust the "G-LINEAR" to become the following figure.
adjust the "G-LINEAR" to become the following figure.
10.3.1.5 "G-PIN (V)" adjustment
Push the "TV/AV" buttons, and select the "G-PIN".Push the "Channel up/down" buttons, and adjust
the "G-PIN (V)" to become the following figure.
the "G-PIN (V)" to become the following figure.
10.3.1.6 "G-PIN (H)" adjustment
Push the "TV/AV" buttons, and select the "G-PIN".Push the "Volume up/down" buttons, and adjust
the "G-PIN (H)" to become the following figure.
the "G-PIN (H)" to become the following figure.
10.3.1.7 "G-CORNER" adjustment
Push the "TV/AV" buttons, and select the "G-CORNER".Push the "Volume up/down" buttons, and
adjust the "G-CORNER" to become the following figure.
adjust the "G-CORNER" to become the following figure.
10.3.1.8 "G-KEY" adjustment
Push the "TV/AV" buttons, and select the "G-KEY".Push the "Channel up/down" buttons, and adjust
the "G-KEY" refer to following figure.
the "G-KEY" refer to following figure.
10.3.1.9 "G-STATIC" adjustment
Push the "TV/AV" buttons, and select the "G-STATIC".Push the "Channel/Volume up/down" buttons,
and adjust "G-STATIC" so that Horizontal & Vertical center line is aligned with the bump in the
screen center mark.
and adjust "G-STATIC" so that Horizontal & Vertical center line is aligned with the bump in the
screen center mark.
TOP
PREVIOUS
NEXT
10.3.2 Red Coarse Convergence
Adjustment
Adjustment
TOP
PREVIOUS
NEXT
10.3.2.1 Reparation
Push the "SOUND" button, and select the Red Adjustment mode.Push the "2" button, and select the
"Border and Cross" pattern.Push the "MUTE" button, and select the "Yellow" colour.Push the
"POSITION" button, and adjust the "R-STATIC" so that the Redcolor of pattern is aligned with Green
colour of pattern.
"Border and Cross" pattern.Push the "MUTE" button, and select the "Yellow" colour.Push the
"POSITION" button, and adjust the "R-STATIC" so that the Redcolor of pattern is aligned with Green
colour of pattern.
10.3.2.2 "R-SKEW (V)" adjustment
Push the "TV/AV" buttons, and select the "R-SKEW".Push the "Volume up/down" buttons, and adjust
the reference line become a vertical line. (Refer to figure.)
the reference line become a vertical line. (Refer to figure.)
10.3.2.3 "R-SKEW (H)" adjustment
Push the "TV/AV" buttons, and select the "R-SKEW".Push the "Channel up/down" buttons, and
adjust reference line become a horizontal line. (Refer to figure.)
adjust reference line become a horizontal line. (Refer to figure.)
Click on the first or last page to see other TX-43P800X / TX-43P800HM / TX-43P800HQ / TX-43P800HZ / TX-51P800X / TX-51P800HM / TX-51P800HQ service manuals if exist.