DOWNLOAD Panasonic PT-RZ31K / PT-RS30K (serv.man2) Service Manual ↓ Size: 61.74 MB | Pages: 127 in PDF or view online for FREE

INF-11

Chapter 4 Settings — Menu navigation

ENGLISH - 85

[PROJECTOR ID]

[ALL]

[PROJECTION METHOD]

―

[OPERATION SETTING]

―

[LIGHT OUTPUT]

[83.3%]

[BRIGHTNESS CONTROL]

―

[STANDBY MODE]

[NORMAL]

[NO SIGNAL SHUT-OFF]

[DISABLE]

[NO SIGNAL LIGHTS-OUT]

[DISABLE]

[INITIAL STARTUP]

[LAST MEMORY]

[STARTUP INPUT SELECT]

[LAST USED]

[DATE AND TIME]

―

[SCHEDULE]

[OFF]

[MULTI PROJECTOR SYNC]

―

[RS-232C]

―

[REMOTE2 MODE]

[DEFAULT]

[FUNCTION BUTTON]

―

[LENS CALIBRATION]

―

[LENS MEMORY]

―

[STATUS]

―

[AC VOLTAGE MONITOR]

[OFF]

[FILTER SETTING]

―

[SAVE ALL USER DATA]

―

[LOAD ALL USER DATA]

―

[INITIALIZE]

―

[SERVICE PASSWORD]

―

[SECURITY PASSWORD]

[OFF]

[SECURITY PASSWORD CHANGE]

―

[DISPLAY SETTING]

[OFF]

[TEXT CHANGE]

―

[CONTROL DEVICE SETUP]

―

[CONTROL DEVICE PASSWORD CHANGE]

―

[DIGITAL LINK MODE]

[AUTO]

INF-12

Chapter 4 Settings — Menu navigation

86 - ENGLISH

[DIGITAL LINK STATUS]

―

[NETWORK SETUP]

―

[NETWORK CONTROL]

―

[NETWORK STATUS]

―

[DIGITAL LINK MENU]

―

[Art-Net SETUP]

[OFF]

[Art-Net CHANNEL SETTING]

[2]

[Art-Net STATUS]

―

 

f

Some items may not be adjusted or used for certain signal formats to be input to the projector.

When the items cannot be adjusted or used, the items in the menu screen are shown in black characters, and they cannot be adjusted or 

set.

 

f

Sub-menu items and factory default settings vary depending on the selected input terminal.

INF-13

This projector has Service Mode in addition to standard on-screen menus (User Mode).

This mode enables some menu settings for the service operation.

1.   Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu on the 

screen.

2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.

3. Input the password "1565" by remote controller and press the [ENTER] button.

4. Press the [MENU] button. "SERVICE MODE" (MAIN MENU) will be displayed.

1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu.

2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.

3. Input the password "0000" by remote controller and press the [ENTER] button.

4. Press the [MENU] button. "USER MODE" (MAIN MENU) will be displayed.

* Function varies according to a version of the main microcomputer software.

"EXTRA OPTION" is added to the bottom of the main menu.

SERVICE PASSWORD

INPUT

SET

ENTER

SERVICE PASSWORD

SERVICE MODE

RETURN

MENU

SERVICE PASSWORD

INPUT

SET

ENTER

SERVICE PASSWORD

USER MODE

RETURN

MENU

  • Setting of the DYNAMIC GAMMA operation.

    - ON : Enable the Dynamic gamma function. (Default setting)

    - OFF : Disable the Dynamic gamma function.

EXTRA OPTOPN

DYNAMIC GAMMA MODE

3DCMS

SHUTTER KEEP

ON
ON

OFF

SELF CHECK
POWER OFF MESSAGE
ERROR OSD
ELECTRICAL CONVERGENCE
MECHANICAL CONVERGENCE
MODEL
CLOG SENSOR CALIBRATION
LIGHT ADJUST
INDICATOR SETTING

MENU SELECT

SUB MENU

ENTER

1. 

8. 

7. 

5. 

3. 
4. 

6. 

9. 

10. 

11. 

2. 

INF-14

SELF CHECK

1/3

MODEL        : RZ31K
SERIAL NO.   : SW1234567890
---------- VERSION --------------
MAIN         : 1.00.00
SUB          : 1.00.00
DIGITAL LINK : 1.30.20.5
FPGA         : 01.01/02.02/03.03
CPLD         : 01.01
FM(R)        : 00.0400.00
FM(G)        : 00.0400.00
FM(B)        : 00.0400.00
LD DRIVER    : 01.00/01.00/01.00/01.00

DEVICE CHECK : OK

①
②

③
④
⑤
⑥
⑦

⑨

⑧

SELF CHECK

2/3

LD SUB       : 01.00/01.00/01.00/01.00
FRC          : 1.00.00
POWER        : 1.00.00
---------- DEVICE CHECK ----------
OK : AIR TEMP 123/456
OK : DMD TEMP 123/456
OK : OUT TEMP 123/456
OK : AIR FLOW 123/456/789
OK : LD1B TEMP 123

NG : LD1S TEMP 123

OK : LD2B TEMP 123
OK : LD2S TEMP 123

DEVICE CHECK : 

NG

⑫

⑬
⑭

⑩
⑪

⑮
⑯
⑰
⑱
⑲
⑳

SELF CHECK

3/3

OK : FPGA TEMP 123

OK 

: LD1B 1 * 

0

 1 1 1

OK 

: LD1S 1 

0

 1 1 1 *

OK : LD2B 1 1 1 1 1 1
OK : LD2S 1 1 1 1 1 1

NG 

: FAN[1] 1111 111

0

 1111 1111 1111

OK : FAN[2] 1111 1111 1111 1111 1
OK : PHOTO Y 123456.7
OK : ATM 1234/567
OK : ANGLE H -123.4/ V +123.4
OK : SHUTTER 65535 [    0]

DEVICE CHECK : 

NG

㉓
㉔
㉕

㉑
㉒

㉗

㉖

㉘
㉙

㉛

㉜

㉚

  • Setting of the 3D Color Management System operation.

    - ON : Enable the 3D Color Management system function. (Default setting)

    - OFF : Disable the 3D Color Management system function.

  • Self-diagnosing information Displays.

① – Model name

② – Serial no.

------------------- VERSION-----------------------------

③ – Main CPU firmware version

④ – Sub CPU firmware version

⑤ – Digital Link firmware version

⑥ – Digital Link firmware version

⑦ – FPAG firmware version

⑧ – (R/G/B) Formatter firmware version

⑨ – LD driver (LD1B/LD1S/LD2B/LD2S) firmware version

⑩ – LD Sub driver firmware version

⑪ – FRC firmware version

⑫ – Power firmware version

------------------- DEVICE CHECK-----------------------------

⑬ – Intake air temperature (Celsius/Fahrenheit)

⑭ – DMD temperature (Celsius/Fahrenheit) 

⑮ – Exhaust air temperature (Celsius/Fahrenheit) 

⑯ –  Airflow sensor 

(Sensor value/AD conversion value/Correc-

tion value)

⑰ – LD1B temperature (Celsius)

⑱ – LD1S temperature (Celsius)

⑲ – LD2B temperature (Celsius)

⑳ – LD2S temperature (Celsius)

㉑ 

– FPGA temperature (Celsius)

 

㉒

–  LD1B check (1: normal / 0: abnormal / *: intentional Off)

㉓

–  LD1S check (1: normal / 0: abnormal / *: intentional Off)

㉔

–  LD2B check (1: normal / 0: abnormal / *: intentional Off)

㉕

–  LD2S check (1: normal / 0: abnormal / *: intentional Off)

㉖

–  Fan[1] check (1: normal / 0: abnormal)

㉗

–  Fan[2] check (1: normal / 0: abnormal)

㉘

– Luminance sensor check (detected value) 

㉙

–  

Atmospheric pressure sensor check 

(Sensor detected 

value/Temperature detected value)

㉚

– Angle sensor check (Horizontal angle / Vertical angle)

㉛

–  Shutter control check (Opening and shutting times 

[Failure times])

㉜ – Device check (OK: Normal, NG: abnormal)

[Note]

  •  Items 

⑬

 to 

㉜

 indicates the status of "NG" or "OK". If the "NG" indicates in red, the projector has an abnormality now. If the 

"OK" indicates in red, the projector had an abnormality in the past and operates normally now.

   •  To clear the error status, press the [MENU] key in the SELF CHECK mode, the confirmation window will appear and select 

[OK] to clear.

 CLEAR ERROR INFOMATION?

OK

CANCEL

  • This must be done after finishing the repair or maintenance.