Panasonic PT-LX270U / PT-LX270E / PT-LX270EA / PT-LX300U / PT-LX300E / PT-LX300EA (serv.man2) Service Manual ▷ View online
PT-LX270 / PT-LX300 series
5-2
5-1-2 DLP Composer Lite Setup
Procedure
1. Choose "DLP Composer Lite V11.1 Setup"
Program.
2. Click "Next".
3. Read "License Agreement".
- Choose "I accept and agree to be bound by
all the terms and conditions of this License
Agreement".
Agreement".
- Click "Next".
4. Click "Next".
PT-LX270 / PT-LX300 series
5-3
5. Click "Next".
6. Click "Next".
7. Click "Finish".
PT-LX270 / PT-LX300 series
5-4
5-1-3 Firmware Upgrade
Procedure
1.
Set-up
- Hold on "Power" button and plug in the
power cord.
- Until Power ,Temp,Lamp LED will light red ,
Loosen “Power” button.
Loosen “Power” button.
- Connect projector with RS232 cable to PC.
2. Execute the "DLP Composer
TM
Lite 11.1"
file.
3. Setting "11.1FlashDeviceParameters".
- Select the file "11.1FlashDeviceParameters".
- Put "FlashDeviceParameters" file into the
folder where you setup "DLP Composer Lite
11.1".
- Put "FlashDeviceParameters" file into the
folder where you setup "DLP Composer Lite
11.1".
4. Click "Edit" and "Perferences".
PT-LX270 / PT-LX300 series
5-5
5. Click "Communications".
- Select “Serial Port”, then click “Configure”.
- Select “Serial Port”, then click “Configure”.
- Select the COM Port which you are using.
6. “Serial Port Configuration” picture will
appear on the screen.
appear on the screen.
- Make sure the settings are as below:
(1) In “Baud Rate” item, select “115200”.
(2) In “Data Bits” item, select “8”.
(3) In “Stop Bits” item, select “1”.
(4) In “Parity” item, select “None”.
(5) In “RTS” item, select “Enable”.
(6) In “CTS” item, select “Disable”.
(7) Key in “2000” into “Read” and “Write”
items of “ Timeouts (in milliseconds)”.
items of “ Timeouts (in milliseconds)”.
- Click "OK".
7. Choose "Flash Loader".
- Click "Browse" to search the firmware file
(*.img).
- Click "Open".
Click on the first or last page to see other PT-LX270U / PT-LX270E / PT-LX270EA / PT-LX300U / PT-LX300E / PT-LX300EA (serv.man2) service manuals if exist.