Sharp AR-NB3 (serv.man16) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Document Systems Support
1. Model Name AR-NB3
2. Description
Executed from the production in June, 2007
Ver.04.00.00
Æ Ver.04.01.02
Reason for change: 1. The following problems have been fixed.
1. When setting the barcode height to 12 points or smaller, it is not printed at the set height.
2. When printing a specific PDF data using the direct print function, hang-up may occur.
3. The PS job including the CTRL-D command is not printed correctly.
4. When a job with <Esc>E command is executed immediately after the command (UEL), which indicates a separator, an
error
may occur.
5. During print in UNIX environment, a part of data may get garbled.
6. For the mail software having a function for automatically adding a title to a blank e-mail, the status message request via
e-mail
may not be activated.
7. When printing a specific PD data, the machine may be rebooted.
8. For the user name and password for the POP before SMTP setting, only up to 16 bytes can be entered.
(Modified to enter up to 32 bytes.)
9. During print in UNIX environment, the print position may be displaced.
10. When a specific PS job is sent twice, PS error may occur at the 2nd job.
11. Printing from "Tobit Faxware7" may be impossible under the Netware6.5NDPS environment.
2. When printing a specific PDF data using the direct print function, hang-up may occur.
3. The PS job including the CTRL-D command is not printed correctly.
4. When a job with <Esc>E command is executed immediately after the command (UEL), which indicates a separator, an
error
may occur.
5. During print in UNIX environment, a part of data may get garbled.
6. For the mail software having a function for automatically adding a title to a blank e-mail, the status message request via
may not be activated.
7. When printing a specific PD data, the machine may be rebooted.
8. For the user name and password for the POP before SMTP setting, only up to 16 bytes can be entered.
(Modified to enter up to 32 bytes.)
9. During print in UNIX environment, the print position may be displaced.
10. When a specific PS job is sent twice, PS error may occur at the 2nd job.
11. Printing from "Tobit Faxware7" may be impossible under the Netware6.5NDPS environment.
Reason for change: 2. The following specifications have been changed.
1. When there is no barcode font, JetCAPS command processing is canceled.
2. In the case of PJL command @PJL DEFAULT BLANKSKIP=ON, blank printing inhibit setting is enabled.
3. The US summer time change implemented in 2007 is supported.
2. In the case of PJL command @PJL DEFAULT BLANKSKIP=ON, blank printing inhibit setting is enabled.
3. The US summer time change implemented in 2007 is supported.
Firmware version upgrade ... (3)
TECHNICAL BULLETIN
Date:
18 September 2007
Model:
AR-NB3
Ref.:
001
Colour:
White
Page:
1 of 1
Display