Panasonic DP-1510P / DP-1810P Service Manual ▷ View online
41
(9) 1 Screw (E5).
(10) Disconnect the Harness (1814).
(11) Remove the Fan (808).
(12) 3 Screws (19).
(13) Remove the Lower Fan Bracket (805).
(13) Remove the Lower Fan Bracket (805).
(14) Disconnect the Harness (1830) on the LVPS
(CN60).
(15) Disconnect 2 Harnesses (1812, 1822) on the
LVPS (CN61 and CN62).
(16) Remove the Inner FL Cover (110).
(17) 5 Screws (19).
(18) Remove the LVPS Assembly.
(18) Remove the LVPS Assembly.
(10)
(9)
(11)
(12)
(13)
(12)
(14)
(15)
(16)
(17)
(17)
(18)
(17)
42
(19) 6 Screws (19).
(20) Remove the LVPS (1404).
Note:
(20) Remove the LVPS (1404).
Note:
When re-installing the LVPS, install the upper 4
Screws first and then the remaining 2 Screws.
Screws first and then the remaining 2 Screws.
(21) Disconnect all Harnesses on the HTC PC Board
(CN760, CN761, CN762, CN764, CN765,
CN766 and CN767).
CN766 and CN767).
(22) Remove the Clamp (730).
(23) Release the Locking Support C (728).
(24) 1 Screw (19).
(25) Remove the HTC PC Board (1407).
(23) Release the Locking Support C (728).
(24) 1 Screw (19).
(25) Remove the HTC PC Board (1407).
(19)
(19)
(20)
(21)
(21)
(21)
(23)
(24)
(23)
(25)
(21)
(22)
(21)
43
2.2.7.
ILS, Fan
(1) 2 Screws (E6).
(2) Remove 2 Micro Switch (813) and Disconnect 2
(2) Remove 2 Micro Switch (813) and Disconnect 2
Harnesses (1823).
(3) 1 Screw (24).
(4) Remove the 3 Fly Wheels (1101).
(4) Remove the 3 Fly Wheels (1101).
Note:
When re-installing the Fly Wheels, make sure
that the Imprinted Marks are facing outward.
that the Imprinted Marks are facing outward.
(5) 2 Screws (E5).
(6) Disconnect the Harness (1820).
(7) Remove the Fan (1149).
(6) Disconnect the Harness (1820).
(7) Remove the Fan (1149).
(1)
(2)
(3)
(4)
(5)
(7)
(6)
44
2.2.8.
SC PC Board, LPC3 PC Board
(1) Disconnect all Harnesses on the SC PC Board
(1401).
(2) 2 Screws (20).
(3) 7 Screws (19).
(4) Remove the SC PC Board (1401).
(3) 7 Screws (19).
(4) Remove the SC PC Board (1401).
Note:
When re-installing the SC PC Board.
(5) Release 2 Latch Hooks and remove the Card
Guide (816).
(6) Move 2 Lock Springs as illustrated.
(7) 2 Screws (20).
(8) Reinstall the Card Guide (816) as illustrated.
(9) Position the Memory Ground Plate (721) as
(7) 2 Screws (20).
(8) Reinstall the Card Guide (816) as illustrated.
(9) Position the Memory Ground Plate (721) as
illustrated.
Note:
Make sure that the leg of the Memory Ground
Plate is properly installed into the hole of the Card
Guide as illustrated in (A).
Plate is properly installed into the hole of the Card
Guide as illustrated in (A).
(10) 1 Screw (19).
(11) 7 Screws (19).
(1)
(3)
(3)
(4)
(2)
(3)
(5)
(6)
(7)
(8)
(9)
(7)
(10)
(A)
Click on the first or last page to see other DP-1510P / DP-1810P service manuals if exist.