Panasonic DP-1510P / DP-1810P Service Manual ▷ View online
37
(22) 2 Screws (19).
(23) Remove the Inverter PC Board (564).
(23) Remove the Inverter PC Board (564).
(24) 2 Screws (19).
(25) Remove LFB PC Board (1414) Assembly and
(25) Remove LFB PC Board (1414) Assembly and
LFB PC Board (1414).
(26) Disconnect the Harness on the LFB PC Board.
(27) Remove 2 Sliders on the Connectors.
(28) Remove the FPC Cable (260).
(28) Remove the FPC Cable (260).
Note:
The Sliders must be re-installed when
reassembling.
reassembling.
(29) Remove the ADF Unit. (Refer to 2.2.2.)
(30) 2 Silver Screws (B1).
(31) Remove the Rear Platen Cover (114).
(30) 2 Silver Screws (B1).
(31) Remove the Rear Platen Cover (114).
(22)
(22)
(23)
(24)
(26)
(25)
(25)
(28)
(27)
(31)
(30)
38
(32) Remove the Rear Cover and Rear Plate.
(Refer to 2.2.3.)
(33) Remove the E-Ring (5Y).
(34) Remove the Synchronous Belt (118).
(35) Remove the MXL34 Pulley (119).
(34) Remove the Synchronous Belt (118).
(35) Remove the MXL34 Pulley (119).
(36) 3 Screws (19).
(37) Disconnect the Harness (1807) on the Scanning
(37) Disconnect the Harness (1807) on the Scanning
Motor.
(38) Remove the Scanning Motor Bracket (120)
Assembly.
Note:
When re-installing the Motor Bracket, tighten the
upper screw first.
upper screw first.
(39) 2 Screws (36).
(40) Remove the Scanning Motor (131).
(40) Remove the Scanning Motor (131).
(41) Disconnect the Harness (1831) on the SC PC
Board (CN106 and CN120).
(33)
(34)
(35)
(38)
(36)
(37)
(39)
(40)
(41)
39
(42) Release the Harnesses from the Clamps.
(43) Disconnect the Harness (1805).
(44) Disconnect the Harness (1803).
(43) Disconnect the Harness (1805).
(44) Disconnect the Harness (1803).
(45) 1 Screw (19).
(46) Remove the Front Platen Frame Bracket (127).
(47) 1 Screw (19).
(48) Remove the Rear Platen Frame Bracket (128).
(49) 1 Screw (19).
(46) Remove the Front Platen Frame Bracket (127).
(47) 1 Screw (19).
(48) Remove the Rear Platen Frame Bracket (128).
(49) 1 Screw (19).
(50) Remove the Scanner Unit.
(42)
(44)
(43)
(45)
(49)
(47)
(46)
(48)
(50)
40
2.2.6.
LSU, Fan, LVPS, HTC PC Board
(1) 2 Screws (19).
(2) Disconnect 2 Harnesses (1809, 1824).
(2) Disconnect 2 Harnesses (1809, 1824).
(3 connectors)
(3) Remove the LSU (710).
Note:
Do not touch the RED Screw (A) of LSU Damper
as illustrated.
as illustrated.
Note:
When re-installing the LSU, put the latch under the
Plate Spring.
Plate Spring.
(4) 5 Screws (19).
(5) Remove the LVPS Plate (804) Assembly.
(5) Remove the LVPS Plate (804) Assembly.
Note:
When re-installing the LVPS Plate (804)
Assembly, make sure that the latch is not over the
Power SW.
Assembly, make sure that the latch is not over the
Power SW.
(6) 1 Screw (E5).
(7) 3 Screws (19).
(8) Remove the Upper Fan Bracket (806).
(7) 3 Screws (19).
(8) Remove the Upper Fan Bracket (806).
(1)
(3)
(2)
(A)
(4)
(5)
(4)
(6)
(7)
(8)
(7)
Click on the first or last page to see other DP-1510P / DP-1810P service manuals if exist.