Panasonic DP-1510P / DP-1810P Service Manual ▷ View online
53
(14) Remove the Fuser Lamp (924).
Note:
Do not Touch the glass portion of the Fuser Lamp
with bare hands. Grease from finger prints will
shorten its life cycle, use isopropyl alcohol to clean
finger prints.
with bare hands. Grease from finger prints will
shorten its life cycle, use isopropyl alcohol to clean
finger prints.
(15) Remove the Snap Ring (B9).
(16) Remove the Jam Release Knob (934).
(16) Remove the Jam Release Knob (934).
(17) 1 Screw (19).
(18) Remove the Right Side Cover (904).
(18) Remove the Right Side Cover (904).
(19) Release the Jam Release Guide Spring (926).
(20) Remove the Jam Release Guide (903).
(20) Remove the Jam Release Guide (903).
(14)
(16)
(15)
(17)
(18)
(20)
(19)
54
(21) 2 Screws (G5).
(22) Remove the Exit Upper Guide (901).
(22) Remove the Exit Upper Guide (901).
(23) Remove 2 Pressure Springs (952).
(24) Remove the Pressure Roller (914).
(25) Remove the Exit Lower Guide (902).
(21)
(21)
(22)
(23)
(23)
(24)
(25)
55
<Cleaning Separator>
(1) Clean the Separators with a soft cloth, saturated
with isopropyl alcohol.
(2) Clean 2 Separation HR Sheets with a soft cloth,
saturated with isopropyl alcohol.
(26) Remove 3 Separator Springs (953).
(27) Remove 5 Separators (923).
(27) Remove 5 Separators (923).
(28) Remove the Exit Lever (921).
(29) Remove 2 Separation HR Sheets (970).
(1)
(2)
(27)
(26)
(28)
(29)
56
(30) 1 Screw (23).
(31) 1 Screw (19).
(32) Release the Stopper and disconnect the
(31) 1 Screw (19).
(32) Release the Stopper and disconnect the
Harness.
(33) Remove the Harness Guide (906).
<Cleaning Thermistor Assembly, Thermostat>
(1) Clean the Thermistor Assembly (944) with a
soft cloth, saturated with isopropyl alcohol.
(2) Clean the Thermostat (947) with a soft cloth,
saturated with isopropyl alcohol.
(34) 2 Screws (23).
(35) Remove the Thermal Fuse (948).
(36) 2 Screws (23).
(37) Remove the Thermostat (947).
(38) 1 Screw (1Y).
(39) Remove the Thermistor Assembly (944).
(35) Remove the Thermal Fuse (948).
(36) 2 Screws (23).
(37) Remove the Thermostat (947).
(38) 1 Screw (1Y).
(39) Remove the Thermistor Assembly (944).
<Cleaning the Fuser Roller>
(1) Clean the Fuser Roller (913) with a soft cloth,
saturated with isopropyl alcohol.
(31)
(33)
(30)
(32)
(1)
(2)
(35)
(37)
(39)
(34)
(36)
(38)
(1)
Click on the first or last page to see other DP-1510P / DP-1810P service manuals if exist.