Panasonic DP-1510P / DP-1810P Service Manual ▷ View online
29
(52) 5 Screws (19).
(53) Remove the Center Bracket (452).
(54) Release the NP Actuator Spring (408).
(55) Remove the NP Actuator (407).
(56) Disconnect the Harness (1837). (2 Connectors)
(57) Remove the Photo Sensor (604).
(58) Remove the Photo Sensor (604).
(53) Remove the Center Bracket (452).
(54) Release the NP Actuator Spring (408).
(55) Remove the NP Actuator (407).
(56) Disconnect the Harness (1837). (2 Connectors)
(57) Remove the Photo Sensor (604).
(58) Remove the Photo Sensor (604).
Note:
Do not break the Latch Hooks when removing or
re-installing the Photo Sensors (604).
re-installing the Photo Sensors (604).
(59) Remove the Snap Ring (B9).
(60) Remove 2 Bushing (410).
(61) Remove the Timing Actuator (403).
(62) Remove the Feed Roller (409).
(60) Remove 2 Bushing (410).
(61) Remove the Timing Actuator (403).
(62) Remove the Feed Roller (409).
(63) 4 Silver Screws (B1).
(64) Remove the Original Lower Tray (327).
(64) Remove the Original Lower Tray (327).
(65) 1 Screw (62).
(66) Disconnect the Harness (1839) on the SNS PC
(66) Disconnect the Harness (1839) on the SNS PC
Board.
(67) Remove the SNS PC Board (134).
(68) Disconnect 2 Harnesses (1839) on the Photo
(68) Disconnect 2 Harnesses (1839) on the Photo
Sensors.
(69) Remove 2 Photo Sensors (604).
(58)
(56)
(52)
(57)
(53)
(55)
(54)
(60)
(59)
(62)
(61)
(60)
(64)
(63)
(63)
(66)
(69)
(67)
(65)
(68)
30
<Cleaning the Rollers and Rubber>
(1) Open the ADF Cover.
(2) Release the Stopper.
(2) Release the Stopper.
(3) Clean the Separation Rubber, Feed Roller, Pre
Feed Roller and Paper Feed Roller with a soft
cloth, saturated with isopropyl alcohol.
cloth, saturated with isopropyl alcohol.
<Cleaning the Exit Roller>
(1) Lift the Original Tray.
(2) Clean the Exit Roller with a soft cloth, saturated
(2) Clean the Exit Roller with a soft cloth, saturated
with isopropyl alcohol.
<Cleaning the Scanner>
(1) Open the ADF Unit.
(2) Clean the White Guide, Scanning Pad and
(2) Clean the White Guide, Scanning Pad and
Scanning Glasses with a soft cloth, saturated
with isopropyl alcohol.
with isopropyl alcohol.
Note:
Ensure that the Film of the part A is not damaged.
(1)
(2)
(3)
(3)
(3)
(2)
(1)
(2)
(2)
(2)
A
(1)
(2)
31
2.2.3.
Cover Assembly
(1) 3 Screws (19).
(2) Release the 3 Latch Hooks and Remove the
(2) Release the 3 Latch Hooks and Remove the
Front Cover (101).
(3) Remove the Inner J Cover (103).
(4) 4 Silver Screws (B1).
(5) Remove the Left Side Cover (104).
(5) Remove the Left Side Cover (104).
(6) 7 Screws (19).
(7) Remove the Rear Plate (801).
(8) 2 Silver Screws (B1).
(9) Remove the Rear Cover (107).
(7) Remove the Rear Plate (801).
(8) 2 Silver Screws (B1).
(9) Remove the Rear Cover (107).
(10) 1 Screw (19).
(11) Remove the Harness Cover (158).
(12) Release the Harness (1845) from the Clamps.
(13) Disconnect the Connector.
(13) Disconnect the Connector.
(1)
(2)
(1)
(3)
Latch
Hooks
Hooks
(4)
(4)
(5)
(6)
(7)
(8)
(9)
(8)
(13)
(12)
(10)
(11)
32
(14) Remove the Right Cover Stopper (625).
(15) Remove the Front Arm (657).
(15) Remove the Front Arm (657).
(16) Remove the Right Cover (601) Assembly.
Note:
Note:
Remove the front fulcrum (A) and then pushing the
Right Cover (601) Assembly toward the rear,
remove the rear fulcrum.
Right Cover (601) Assembly toward the rear,
remove the rear fulcrum.
(14)
(15)
(16)
(A)
Click on the first or last page to see other DP-1510P / DP-1810P service manuals if exist.