DOWNLOAD Panasonic TH-50PB2E Service Manual ↓ Size: 4.61 MB | Pages: 54 in PDF or view online for FREE

25

TH-50PB2E

[Information about registration of electronic pen]

Information about registration of electronic pen

You can register up to 4 electronic pens for each interactive plasma display.

Once an electronic pen has been registered, it cannot operate another interactive plasma display.

When registering or unregistering an electronic pen, be sure to turn off the power of any other interactive plasma 
displays nearby.

The registration methods of an electronic pen differ the first and the secnod and subsequent.

If you are registering an electronic pen for the first time, perform step      only. Otherwise, perform the procedure below 
starting from step      .

Registration method of electronic pen

[Procedures]

To stop the registration, select [Close].

You cannot register an electronic pen if 3 electronic pens have already been registered.
If you are using the Pairing Tool, clicking [Cancel] cancels the registration.

The power LED blinks green and red alternately. The power indicator stays off.

Registration will be completed in a second. When registration is completed, the power LED lights green.
If a registration error has occurred, the power LED lights red for about one second and power off. Turn on the
electronic pen and perform registration again.

[To unregister the electronic pen]

Select "PAIRING" of "TOUCH-PEN SETTINGS" in the "SETUP" menu of the display, or select           [Settings]
[Start Pairing Tool] from the main menu of Panasonic WhiteBoard Software and select [Unpairing All].

All registered electronic pens are unregistered when unregistration is performed.

Upon completion of Electronic pen deregistration, the unpairing all completion screen is displayed. Select [OK].

Pairing Tool starts and a confirmation screen is displayed. Select [OK].

Press both of buttons

Remote erase button

Remote draw button

Electronic pens may malfunction if multiple displays are used close together.

Press power button

[Check the number of registered electronic pens]

To check the number of current electronic pens registered, select         [Settings]       [Start Pairing Tool] in Panasonic
WhiteBoard Software's (

CD-ROM enclosure) main menu, and choose [Check Status].

It cannot check in built-in Easy WhiteBoard.

26

TH-50PB2E

[Diagnosis when electronic pen cannot charge with a charger]

When the power LED of an electronic pen is blinking red, "loose connection of a charge cable",

"failure of an electronic pen", and "failure of a charger" can be considered. 

Please perform failure diagnosis in the following procedure. 

Procedure of Diagnosis

LED lighting red

LED lighting red

LED blinking red

LED blinking red

Charger cable,

Connect to CHARGE terminl

on the back of charger

Connect to CHARGE terminl

of display

External input terminal on the back of charger

[Connection of charger cable]

[Direct connection of charger cable]

Charger cable,

Connect to Charging

port of the electronic

pen

PC

Connect to USB

port of PC

or

Connect to CHARGE terminal
of display or
CHARGE/MEMORY terminal

[LED indication when charging]

Charging: Lighting red

Charging error: Blinking red

Completion of charge: Lighting green

Connection error of a charger cable 
or
Contact failure of the charger cable

Check connection

of the charger cable and

charge again.

Connect charger cable

to electronic pen directly

and charge.

External input terminal on the

back of charger

Failure of the charger

Failure of the electronic pen

27

TH-50PB2E

[1]Check of LAN microcomputer

[2]Check of Wireless module

Check the communication with the LAN microcomputer

[How to check]

The display check of "IC2004" column in a self check 
or
The display check of the "LAN-MCU" column of CD mode 
picture

IC2004

LAN-MCU

Normal

Abnormal

Display "OK"

Display the numbers

Display "----"

[Diagnostic result]

If the "Normal" judging 

Go to [2] check.

If the "Abnormal" judging 

Failure of the A board (LAN microcomputer)

Self check screen

[1]

[1]

[2]

CD mode screen

Status screen

[2]

[Preparations]

Turn off and turn on a main power supply before 
a check. (Old information is eliminated 
from a LAN microcomputer.) 

The "MAC Address" column of the status 
screen in the "Network Setup" menu
or
The "LAN-MAC (WIRELESS)" column of the 
CD mode screen 

[Diagnostic result]

Normal

Abnormal

MAC Address

LAN-MAC (WIRELESS)

Display of hexadecimal digits

Display of "--:--:--:--:--:--"

Since the main part is normal, the check of 
radio environment or a setup is required for it. 
Failure of the wireless module (the antenna) 
in rare cases.

Failure of the wireless module
or
Breakage of the wireless module terminal 

*: Since each information is checked immediately after power supply ON, it becomes the 

shown of "-- :--:--:--:--: [ -- ]." 
Since an information check is carried out in the order of cable LAN and wireless 
LAN, when you diagnose, please wait for a while and check the contents of a display. 

Display "NG"

Check the communication with a Wireless module

[How to check]

If the "Normal" judging 

If the "Abnormal" judging 

28

TH-50PB2E

To find the failure board (SC or SU/SD) when the power LED is blinking 7 times.

Jumper connector to connect to SC50 connector on SC board

TZSC09187

1. Remove all connector between SC board and SU/SD board to isolate SC board from both SU and SD board electrically. 

2. Connect SC jig to connector SC50 at left bottom side of SC board.
3. Turn on the TV/Display Unit and confirm the power LED blinking.

LED blinking: Possible cause of failure is in SC board
No LED blinking (Lighting or no lighting): Possible cause of failure is in SU or SD board

4. After inspection, turn off the TV/Display Unit and wait a few minutes to discharge.
5. Remove SC jig from SC board.