Harman Kardon DVD 22 (serv.man6) Service Tips ▷ View online
harman/kardon
Software upgrade
DVD22
2007-02-06
Harman International SNC - Harman Consumer International - Harman Consumer Group
To:
All
harman/kardon
Service
Centers
Models:
DVD22
Software Version:
DVD22_V060224_DV34 and DVD22_V060224_DV34
Subject:
Software
upgrades
procedure
There are two versions of DVD22 as we have two different mechanism
See below the SN cut.
DVD22/230 WA0008-01001 WA0008-67633 HD60
-
DV34
DVD22/230 WA0008-67634
-
HD62
-
DV342
DVD22B/230 WA0012-10001 WA0012-19327 HD60
-
DV34
DVD22B/230 WA0012-19328 -
HD62
-
DV342
The two mechanisms are interchangeable as long the right software is used.
So if you change a DV34 with a DV342 use the DV342 software or vs.
Please note that both DV34 and DV342 unzip files have names so extract the zip in to two separate folder on your PC.
This software enable playback of DVD's with large amount of data on the Disc menu.
So it will help on issue were the player do not load the disc.
Procedure:
1.
Unzip the file. In the Zip file is two files
Note the files will not indicate what software version it is.
Note the files will not indicate what software version it is.
2.
Write a CD-ROM with only the Aml_dd.txt and Dvd22.bin files on.
NOTE: use high quality disc and use lowest speed possible for writing the disc.
NOTE: use high quality disc and use lowest speed possible for writing the disc.
3.
Load the disc in to DVD22.
4. The
PLAYER menu will show.
5. Highlight
the
CD-ROM UPGRADE DISC by pushing the down arrow.
6.
Follow the instruction in the bottom of the screen.
7.
Note the screen will freeze when the upload is confirmed.
8.
The display of the unit will show the status of the upgrade procedure afterwards.
Display will count from 01 to 99. (Will not show on the screen)
Display will count from 01 to 99. (Will not show on the screen)
9.
The unit will eject the disc when the upgrades are done.
10. Remove the disc
11. Unplug the unit from main plug
12. Plug the unit in again and power on
13. Confirm the software is correct by enter the OSD/SETUP/ENTER and push 1211
(A service menu will show the version and zone…).
Note: the upgrade will not change the region settings.
Display