DOWNLOAD Panasonic TH-50PB2E Service Manual ↓ Size: 4.61 MB | Pages: 54 in PDF or view online for FREE

13

TH-50PB2E

To use the network function, set each "Network Setup" setting and make sure to set the "Control I/F Select" to "LAN".

Select the NW mode by Up/Down button on the remote control at the front page of CAT mode and then press the Action button
on the remote control.

To exit the NW mode, press the R button on the remote control.

Select the SD mode by Up/Down button on the remote control at the front page of CAT mode and then press the Action button on
the remote control.

To exit the SD mode, press the R button on the remote control.

14

TH-50PB2E

Select the MS mode by Up/Down button on the remote control at the front page of CAT mode and then press the Mute button on
the remote control more than 3 seconds.

To exit the MS mode, press the R button on the remote control.

Select the ID mode by Up/Down button on the remote control at the front page of CAT mode and then press the Mute button on
the remote control more than 3 seconds.

To exit the ID mode, press the R button on the remote control.

Number

Model (Destination)

0

50PB2J (Japan)

1

50PB2U (North America)

2

50PB2E (Europe, CIS)

3

50PB2W (Asia, Oceania, ME)

18

50PB2C (China)

15

TH-50PB2E

16

TH-50PB2E

Picture can be reversed left and right or up and down.
00 : Default (Normal picture is displayed)
01 : Picture is reversed left and right.
02 : Picture is reversed up and down.

Hint : If the defective symptom (e.g. Vertical bar or Horizontal bar) is moved by selection of this mirror, the possible cause is in A-
board.