DOWNLOAD Sharp BD-HP25H Service Manual ↓ Size: 7.05 MB | Pages: 72 in PDF or view online for FREE

Sharp Electronics (U.K.) Ltd.

4 Furzeground Way, Stockley Park, Uxbridge, Middlesex UB11 1EZ

SHARP CORPORATION

OPERATION MANUAL

If you require any advice or assistance regarding

your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport. Customers

without Internet access may telephone 0845 880 0421

during office hours(or (01) 6760648 if telephoning

from Ireland).

Printed in China

TINSEA188WJQZ

11P06-CH-NG

<ORC9051-A>

The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A (amp) fuse. Should the fuse need to be 

replaced, a BSI or ASTA approved BS 1362 fuse marked   or   and of the same rating as above, which is also indicated on the pin face of 

the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely 

event of the socket outlet in your home not being compatible with the plug supplied, cut-off the mains plug and fit an appropriate type.

DANGER:  The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner.

Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may 

occur.

To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:

As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your 

plug, proceed as follows:

 

- The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.

 

- The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.

Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.

Before replacing the plug cover make sure that:

 

- If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.

 

- The cord grip is clamped over the sheath of the mains lead and not simply over the lead wires.

IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replacement, of 

this product subject to the conditions listed below:-

1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does not cover 

faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with the product, or 

repair other than by a Service Facility appointed by Sharp. 

2. As this product is intended for private domestic use only, the guarantee will not apply if the product is used in 

the course of a business, trade or profession.

3. To benefi t from this guarantee, any fault which occurs must be notifi ed to Sharp, or its appointed Service 

Facility within one year from the date this product was purchased. Proof of purchase must be provided. 

4. The guarantee does not cover carriage costs. 

5. In the unlikely event of this product requiring repair, please contact the supplier from whom it was purchased. 

Where this is not possible, please contact the Sharp Customer Information Centre on the telephone number 

given below. 

6. No person has any authority to vary the terms or conditions of this guarantee. 

7. This guarantee is offered as an additional benefi t to your statutory rights, and does not affect these rights in 

any way. 

If you have any difficulty operating this product, or would like information on other Sharp products, 

please telephone the Sharp Customer Information Centre on the number given below. 

Sharp Customer Information Centre - Telephone 0845 880 0421 

(or (01) 676 0648 if telephoning from Ireland)

0201

Introduction

USE OF CONTROLS OR ADJUSTMENTS OR 

PERFORMANCE OF PROCEDURES OTHER THAN 

THOSE SPECIFIED HEREIN MAY RESULT IN 

HAZARDOUS RADIATION EXPOSURE.

AS THE LASER BEAM USED IN THIS PLAYER IS 

HARMFUL TO THE EYES, DO NOT ATTEMPT TO 

DISASSEMBLE THE CABINET.

REFER SERVICING TO QUALIFIED PERSONNEL 

ONLY.

• This Player is classified as a CLASS 1 LASER 

product.

• The CLASS 1 LASER PRODUCT label is located 

on the rear cover.

• This product contains a low power laser device. To 

ensure continued safety do not remove any cover 

or attempt to gain access to the inside of the 

product. Refer all servicing to qualified personnel.

This Player can be used only where the power 

supply is AC 100–240V, 50/60Hz. It cannot be 

used elsewhere.

To avoid any malfunctions of the Player, and to 

protect against electric shock, fire or personal 

injury, please observe the following.

• Hold the plug firmly when connecting or 

disconnecting the AC power cord.

• Keep the AC power cord away from heating 

appliances.

• Never put any heavy object on the AC power 

cord.

• Do not attempt to repair or reconstruct the AC 

power cord in any way.

Electricity is used to perform many useful functions, but it can also cause personal 

injuries and property damage if improperly handled. This product has been engineered 

and manufactured with the highest priority on safety. However, improper use can result 

in electric shock and/or fire. In order to prevent potential danger, please observe the 

following instructions when installing, operating and cleaning the product. To ensure 

your safety and prolong the service life of your Blu-ray Disc/DVD Player, please read the 

following precautions carefully before using the product.

1)  Read these instructions.

2)  Keep these instructions.

3)  Heed all warnings.

4)  Follow all instructions.

5)  Do not use this apparatus near water.

6)  Clean only with dry cloth.

7)  Do not block any ventilation openings. Install in accordance with the manufacturer’s 

instructions.

8)  Do not install near any heat sources such as radiators, heat registers, stoves, or 

other apparatus (including amplifiers) that produce heat.

9)  Protect the power cord from being walked on or pinched particularly at plugs, 

convenience receptacles, and the point where they exit from the apparatus.

10)  Only use attachments/accessories specified by the manufacturer.

11)  Use only with the cart, stand, tripod, bracket, or table specified by the 

manufacturer, or sold with the apparatus. When a cart is used, use caution when 

moving the cart/apparatus combination to avoid injury from tip-over.

12)  Unplug this apparatus during lightning storms or when unused for long periods of 

time.

13)  Refer all servicing to qualified service personnel. Servicing is required 

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have 

fallen into the apparatus, the apparatus has been exposed to rain or 

moisture, does not operate normally, or has been dropped.

14)  Power Sources—This product should be operated only from the type of power 

source indicated on the marking label. If you are not sure of the type of power 

supply to your home, consult your product dealer or local power company. For 

products intended to operate from battery power, or other sources, refer to the 

operating instructions.

15)  Overloading—Do not overload wall outlets, extension cords, or integral convenience 

receptacles as this can result in a risk of fire or electric shock.

16)  Object and Liquid Entry—Never push objects of any kind into this product through 

openings as they may touch dangerous voltage points or short-out parts that could 

result in a fire or electric shock. Never spill liquid of any kind on the product.

17)  Damage Requiring Service—Unplug this product from the wall outlet and refer 

servicing to qualified service personnel under the following conditions:

a)  When the AC cord or plug is damaged,

b)  If liquid has been spilled, or objects have fallen into the product,

c)  If the product has been exposed to rain or water,

d)  If the product does not operate normally by following the operating 

instructions.

Adjust only those controls that are covered by the operating instructions as 

an improper adjustment of other controls may result in damage and will often 

require extensive work by a qualified technician to restore the product to its 

normal operation,

e)  If the product has been dropped or damaged in any way, and

f)  When the product exhibits a distinct change in performance - this indicates a 

need for service.

18)  Replacement Parts—When replacement parts are required, be sure the service 

technician has used replacement parts specified by the manufacturer or have the 

same characteristics as the original part. Unauthorised substitutions may result in 

fire, electric shock, or other hazards.

19)  Safety Check—Upon completion of any service or repairs to this product, ask the 

service technician to perform safety checks to determine that the product is in 

proper operating condition.

20)  The main AC plug is used as disconnect device and shall always remain readily 

operable.