Panasonic CF-30FTSAZAM Simplified Service Manual ▷ View online
Wiring Connection Diagram
6-1
CN201
CN103
CN100
CN102
CN101
CN701
CN700
CN705
CN703
JK701
JK700
CN702
CN1
CN200
INVERTER PCB
I/O PCB
TS PCB
USB PCB
USB
PORT
BACK LIGHT
SERIAL
PORT
MICRO
PHONE
HEAD
PHONE
EXPANSION
BUS
USB
PORT
USB
PORT
EXTERNAL
DISPLAY
PORT
TOUCH SCREEN
CN2
CN1
ANTENNA
PCB
EXT ANT.
PCB
LCD
JK1
CN3
CN20
CN27
CN2
CN1
CN37
CN11
CN12
CN13
CN14
CN24
CN4
CN28
CN31
CN402
CN401
CN400
CN7
CN8
CN10
CN26
CN29
CN9
CN30
CN18
CN25
CN19
CN15
CN6
CN5
CN21
CN17
DC-IN
LAN PORT
MP PCB
COMBO
DRIVE
SPEAKER
RTC
BATTERY
MAIN PCB
EXPRESS
CARD
W-LAN
MODULE
PCMCIA
CARD
CN22
DIMM MEMORY CARD
CN300
CN301
JK1
J2
J1
CN802
CN800
CN901
CN801
CN1
IEEE1394
INTERFACE
CONNECTOR
TOUCH
PAD
KEYBOARD
MDC
MODEM
MODEM
PORT
PW LED
PCB
SW LED
PCB
HDD FPC
BATTERY
HDD
MAIN
BATTERY
SD
CARD
PAD PCB
GPS PCB
BT PCB
LED PCB
7-1
7 Disassembly/Reassembly
Note:
Power off the computer. Do not shut down to the Suspend or hibernation mode.
Do not add peripherals while the computer is in the Suspend or hibernation mode; abnormal operation may result.
Do not add peripherals while the computer is in the Suspend or hibernation mode; abnormal operation may result.
7.1.
Disassembly Instructions
7.1.1.
Preparation
Before disassembling, be sure to make the following prepara-
tions.
tions.
• Shut down Windows and turn off the power.
• Disconnect the AC adaptor.
• Remove the optional DIMM memory card and PCMCIA card if
• Disconnect the AC adaptor.
• Remove the optional DIMM memory card and PCMCIA card if
they are connected.
• Remove other devices if they are connected.
Attention:
• Please execute writing BIOS ID when you exchange the Main
Board.
• Parts (Sheet and rubber) etc. related various the Conductive
Cloth and Heat Spreader cannot be recycled. Use new parts.
7.1.2.
Removing the Battery Pack and HDD
Pack
Pack
1. Open the Battery Cover.
2. Remove the Battery Pack.
3. Open the HDD Cover.
4. Remove the HDD Pack.
2. Remove the Battery Pack.
3. Open the HDD Cover.
4. Remove the HDD Pack.
Battery
Cover
HDD Cover
HDD Pack
Battery Pack
7-2
7.1.3.
Removing the HDD
1. Remove the Screw. <K1-16>
2. Remove the 4 Screws. <K1-17>
2. Remove the 4 Screws. <K1-17>
And remove the SATA Guard.
3. Release the 2 Tabs, and remove the HDD U Case Ass'y
and the HDD L Case Ass'y.
4. Remove the HDD Dumper Ass'y.
5. Remove the Sheet.
6. Remove the Heater and the Heater Ins Sheet.
7. Remove the HDD FPC.
5. Remove the Sheet.
6. Remove the Heater and the Heater Ins Sheet.
7. Remove the HDD FPC.
Screws <K1-16>: DFHE5025XA
Screws <K1-17>: DRQT2+E8FKL
Screws <K1-17>: DRQT2+E8FKL
7.1.4.
Removing the KB Cover, Hinge
Cover L, Hinge Cover R and Key-
board
Cover L, Hinge Cover R and Key-
board
1. Remove the 4 Screws <N6>, and remove the KB Cover.
2. Remove the 2 Screws <N2> and the 3 Screws <N6>, and
2. Remove the 2 Screws <N2> and the 3 Screws <N6>, and
remove the Hinge Cover L,R.
3. Remove the Keyboard.
Screws <N2>: DRHM5054XA
Screws <N6>: DRQT26+E4FKL
Screws <N6>: DRQT26+E4FKL
HDD U Case Ass'y
HDD FPC
Heater Ins Sheet
HDD L
Case Ass'y
Case Ass'y
HDD
Sheet
<K1-17>
<K1-17>
<K1-16>
SATA Guard
Heater
HDD
Damper
Ass'y
Damper
Ass'y
<N6>
<N6>
<N6>
<N6>
<N6>
<N2>
<N2>
<N6>
<N6>
KB Cover
Hinge Cover L
Hinge
Cover R
Keyboard
<N6>
Bluetooth PCB
7-3
7.1.5.
Removing the KB Cable Cover and
LCD Cable Cover
LCD Cable Cover
1. Remove the 3 Screws <N29>.
2. Remove the LCD Cable Cover.
3. Remove the LCD Cable Plate.
4. Remove the 7 Screws <N29>.
5. Remove the KB Cable Cover.
6. Disconnect the 2 Cable from the 2 Connectors (CN13,
2. Remove the LCD Cable Cover.
3. Remove the LCD Cable Plate.
4. Remove the 7 Screws <N29>.
5. Remove the KB Cable Cover.
6. Disconnect the 2 Cable from the 2 Connectors (CN13,
CN14).
7. Remove the Keyboard.
Screws <N29>: DRQT26+E3FNL
7.1.6.
Removing the GPS PCB and Blue-
tooth PCB
tooth PCB
1. Disconnect the Cable from the Connector. (CN25)
2. Remove the 4 Screws. <N12>
3. Remove the 2 Screws. <N11>
4. Remove the Bluetooth PCB, GPS BT Angle and GPS PCB.
2. Remove the 4 Screws. <N12>
3. Remove the 2 Screws. <N11>
4. Remove the Bluetooth PCB, GPS BT Angle and GPS PCB.
Screws <N11>: DFHE5025XA
Screws <N12>: DXQT2+F3FNL
Screws <N12>: DXQT2+F3FNL
<N29>
<N29>
<N29>
<N29>
<N29>
<N29>
<N29>
<N29>
<N29>
<N29>
to Connector
(CN14)
Connector
(CN13)
Connector
(CN14)
to Connector
(CN13)
KB Cable Cover
LCD
Cable Cover
LCD
Cable Plate
Keyboard
GPS PCB
Bluetooth
PCB
Connector(CN25)
<N11>
<N11>
GPS BT Angle
<N12>
<N12>
<N12>
<N12>
to Connector
(CN25)
Click on the first or last page to see other CF-30FTSAZAM service manuals if exist.