Panasonic UB-T580 / UB-T580W (serv.man3) Service Manual ▷ View online
21
6. Hang the elite Panaboard onto the Wall Mounting Plates
(No.2, No.3) on the wall.
(No.2, No.3) on the wall.
7. With the M6 Bolts, Spring Washers (4 each WS2), and 4
Flash Washers (No.11), secure the elite Panaboard to the wall.
Flash Washers (No.11), secure the elite Panaboard to the wall.
22
8. Reassemble the Upper Cover.
9. Confirm that the elite Panaboard can operate.
See 4.7 “Confirming the elite Panaboard Operation”.
See 4.7 “Confirming the elite Panaboard Operation”.
10. Unplug the USB Cable from the PC to turn off the power.
11. Attach the Cable Clamp (7) to the left or right side of the
Screen Plate Back.
Screen Plate Back.
12. Bundle the USB Cable with the clamp (7).
23
13. Wipe the screen board surface.
Gently wipe the screen board surface with a soft, moist cloth.
Gently wipe the screen board surface with a soft, moist cloth.
24
4.6.2.
For Mounting on the Stand KX-B061 (Sold Separately)
1. Install the Stand. (See Installation Manual for UB-T580/T580W)
2. Fasten the USB Cable to wire the cable along the outer side of
the elite Panaboard. (See 4.6.1-1.)
the elite Panaboard. (See 4.6.1-1.)
3. Attach the 2 Pen Holders (No.4) to the 2 locations.
(See 4.6.1-2.)
(See 4.6.1-2.)
4. As required, relocate the screw attachment position on both
sides as illustrated so that the position where the elite
Panaboard is hung can be changed.
sides as illustrated so that the position where the elite
Panaboard is hung can be changed.
Note: Tightening Torque
More than 1.2 N•cm (12 kgf•cm)
Click on the first or last page to see other UB-T580 / UB-T580W (serv.man3) service manuals if exist.