Panasonic UB-5838C / UB-5338C Service Manual ▷ View online
25
3.6.2.
Installing the Wall-Mounting Fixtures
Note:
1. Note the difference in the hole position for UB-5838C and UB-5338C.
2. Make sure that the position of the holes are level and perpendicular to each other (i.e., the unit will not be crooked).
3. The lateral tolerance of the hole position of the Wall-mounting Fixture is ± 1.5 mm (1/16").
2. Make sure that the position of the holes are level and perpendicular to each other (i.e., the unit will not be crooked).
3. The lateral tolerance of the hole position of the Wall-mounting Fixture is ± 1.5 mm (1/16").
1.
Ensure that the wall is strong enough to support the unit.
For UB-5838C: 1,373 N [140 kgf (309 lbf)]
For UB-5338C: 1,275 N [130 kgf (287 lbf)]
For UB-5838C: 1,373 N [140 kgf (309 lbf)]
For UB-5338C: 1,275 N [130 kgf (287 lbf)]
2.
Using the measuring tape and level, mark the 8 locations to insert the screws.
3.
Drill 8 holes.
Drill holes that are appropriate for the screws you are using.
Drill holes that are appropriate for the screws you are using.
26
Note:
1. Screws (8 count) are not included with the product. Please purchase screws with a size of M6, appropriate for your type of
wall.
2. Tighten the Wall-mounting screws so that they will not become loose.
3. When drilling the holes and installing the wall-mounting fixtures, follow the procedure in “Wall Types and Installation
3. When drilling the holes and installing the wall-mounting fixtures, follow the procedure in “Wall Types and Installation
Procedures”.
4.
Install the Wall-mounting Fixtures using the 4 screws.
2 screws are used for each wall-mounting plate.
The remaining 4 screws are used after installing the unit on the wall.
2 screws are used for each wall-mounting plate.
The remaining 4 screws are used after installing the unit on the wall.
5.
Mount the unit on the wall. (See Sec. 3.3.4.)
27
3.6.3.
Wall Types and Installation Procedures
The method for attaching the Wall-mounting Fixtures to the wall will vary depending on the nature of the wall’s structure.
Three available options are listed below.
Other methods may be necessary depending on the wall.
Three available options are listed below.
Other methods may be necessary depending on the wall.
3.6.3.1.
Metal or Concrete walls
Stud plugs (sold in stores) are needed.
3.6.3.2.
Plasterboard walls
Split-wing toggles (sold in stores) are needed.
1.
Drill eight holes in the wall.
For the correct hole size, refer to the instructions for the
particular stud plugs used.
For the correct hole size, refer to the instructions for the
particular stud plugs used.
2.
Insert a stud plug in each hole.
3.
Insert the bolt through a hole in the Wall-mounting Fixture
and tighten until the Wall-mounting Fixture is securely fixed
to the wall.
and tighten until the Wall-mounting Fixture is securely fixed
to the wall.
1.
Insert the bolt through the hole in the Wall-mounting Fix-
ture and attach the split-wing toggle.Then insert the split-
wing toggle into the hole while the arms are horizontal.
For the correct hole size, refer to the instructions for the
particular split-wing toggles used.
ture and attach the split-wing toggle.Then insert the split-
wing toggle into the hole while the arms are horizontal.
For the correct hole size, refer to the instructions for the
particular split-wing toggles used.
2.
After the arms expand, pull the Wall-mounting Fixture out
until the arms of the split-wing toggle grip firmly into the
wall.
until the arms of the split-wing toggle grip firmly into the
wall.
3.
Tighten the bolt until the Wall-mounting Fixture is securely
fixed to the wall.
fixed to the wall.
28
3.6.3.3.
Wooden walls
Wood screws (sold in stores) are needed.
Insert the wood screw through the hole in the Wall-mount-
ing Fixture and tighten until the Wall-mounting Fixture is
securely fixed to the wall.
For the correct hole size, refer to the instructions for the
particular wood screws used.
ing Fixture and tighten until the Wall-mounting Fixture is
securely fixed to the wall.
For the correct hole size, refer to the instructions for the
particular wood screws used.
Click on the first or last page to see other UB-5838C / UB-5338C service manuals if exist.