DOWNLOAD Panasonic UB-5838C / UB-5338C Service Manual ↓ Size: 3.12 MB | Pages: 127 in PDF or view online for FREE

13

7. POWER Board

8. CONTROL Board

11. Battery

Power Switch

AC Inlet

10. LCD

9. PANEL Board

3. HOME SENSOR

 Board

4. MOTOR DRIVE
           Board

5. Motor

1. Scanner Assy.

(2. SCANNER Board)

Screen Feed Direction

Screen Film

6. Stand (Separately available)

14

1

Scanner Assy.

This assembly consists of LED Light-Guide, Lens, and Contact Image Sensors. A light through the
LED Light-Guide is reflected from the screen film surface.
Then the reflected light will reach the Contact Image Sensors (CISs) through the Lens.
These CISs will convert the light into electrical signals, and then will transmit the signals
to the SCANNER Board.
Then the SCANNER Board will convert the signals into image digital signals and then will transmit
the digital signals to the CONTROL Board.
Then the CONTROL Board will store them in its inner memories so that they can be downloaded to
a USB Flash Memory and a SD Card, or can be printed out with a printer. 

2

SCANNER Board

This board converts the signals into image digital signals, and then will transmit the digital signals to
the CONTROL Board.

3

HOME SENSOR Board

This board detects the Home Marker’s position that tells the start -position of the scrolled screen film
to the Panaboard.

4

MOTOR DRIVE Board

This board has the motor-drive circuits that allows the Screen Main-Roller to feed the screen film.

5

Motor

Used to feed the screen film

6

Stand

Panaboard Stand (separately available)

7

POWER Board

This board supplies power to CONTROL Board, CIS, and other components to realize Panaboard
operation.

8

CONTROL Board

This board operates to control and realize all Panaboard functions.

9

PANEL Board

This board consists of operation keys and LCD device.

10

LCD

This component is a display screen to indicate messages.

11

Battery

Used to back up the setting on the clock

15

The Panaboard is mounted on a wall or is installed to the Stand sold separately.
When mounting it on a wall, refer to Sec. 3.6 (Wall Mounting Construction).
When installing it to the Stand, refer to Operating Instructions for UB-5838C and UB-5338C.

This is a sophisticated piece of equipment, which somewhat depends on the surrounding conditions for optimum operation.
Attention to the following will result in more reliable and quality performance.

This model should not be installed in areas with the following condition.
(1) High temperature and humidity or low temperature and low humidity
(2) Direct exposure to sunlight
(3) Direct exposure to air conditioners, or close to heater ducts
(4) Uneven floor

Refer to Sec. 2.5 “External Dimensions”.

16

Before installing the Panaboard, assemble Wall-mounting Fixtures or optional Stand.
When using the Wall-mounting Fixtures, see Sec.3.6.
When using the optional Stand, refer to Operating Instructions for UB-5838C and UB-5338C.

1. Remove the Joints and Shipping Box.

UB-5838C has 12 Joints.
UB-5338C has 8 Joints.

1. When handling the screen unit, grasp the side cover on either side of screen. Do not grasp the screen film surface, as this

may scratch it.

2. When removing the shipping box, make sure that it does not strike the screen unit. (The screen unit may fall over.)
3. Remove the screen fixing tapes from top down slowly not to damage the screen film surface.
4. The shipping box, cushioning material, and other packing material will be necessary for repackaging this unit.

Do not throw them away.