DOWNLOAD Panasonic UB-5365 / UB-5865 (serv.man2) Service Manual ↓ Size: 6.26 MB | Pages: 127 in PDF or view online for FREE

17

• When obtaining anchors and bolts locally, be absolutely sure that they satisfy the required specifications.
• Use the values recommended by the manufacturer of the anchors used for the depth to which 

the anchors are to be embedded in the wall.

• Use M6 bolts when the anchors have internal screw threads.
• Ensure that the M6 bolt has a mated length of 9 mm (0.36 in.) or longer. (See figure below.)

• Ensure that the M6 bolts do not strike the bottoms of the anchors, and check that they have been tightened up securely.
• Recommended tightening torque: 5.2 N m (53 kgf cm)

18

(1) Confirm that the wall is strong enough to support the weight of
      the Panaboard.
    Note:

 
(2) Make marks on the wall using Installation Manual template
      (TP).

(3) Create four holes in the wall with a drill.

(4) Embed the anchors.

19

(5) Fix the Board Attachment Upper (A1) and Board Attachment

Lower (A2) to the wall with the M6 bolts.

20

(1) Take out the Panaboard from the carton box.

(2) Fold the carton box, remove the protection bag from the

Screen Unit, and place the unit on the carton box. 

(3) Peel the tape to remove the cushions from the Screen Unit.

(4) Remove the 4 screws to release the Reinforcement Plate from 
      the lower side of the Screen Unit.