Panasonic UB-5365 / UB-5865 (serv.man2) Service Manual ▷ View online
29
(3) Connect the 2 connector cables to the Screen Unit.
Then, fasten the cables with the clampers.
Then, fasten the cables with the clampers.
(4) Push down the Printer Open Lever to open the Printer Door.
(5) Remove the tape.
(6) Close the Printer Door.
30
4.6.7.
Attaching the Cover Lower
(1) Insert the Cover Lower (C2) in direction of the arrows
((1) to (2)), and then tighten the 2 screws (S3) to secure the
cover.
((1) to (2)), and then tighten the 2 screws (S3) to secure the
cover.
Note:
At first, tighten the screw on the left side of the
Panaboard when seen from the front.
Panaboard when seen from the front.
31
4.6.8.
Attaching the Tray
(1) Attach the Tray (C3) to the Screen Unit.
(2) Tighten the 2 screws (S3) to secure the Tray.
Note:
At first, tighten the screw on the left side of the
Panaboard when seen from the front.
Panaboard when seen from the front.
(3) With the Washer (W2) and Screw (S3), for your safety,
securely fasten the FG Cable of which one side has been
attached to the Board Attachment Lower (A2) to the Tray (C3).
securely fasten the FG Cable of which one side has been
attached to the Board Attachment Lower (A2) to the Tray (C3).
(4) Gently bend the FG Cable, and then wire the cable backward
so that it can be hidden inside the Board Attachment Lower
when seen from the front.
so that it can be hidden inside the Board Attachment Lower
when seen from the front.
32
4.6.9.
Attaching the Rear Cover (only for use of the optional Stand)
4.6.10. Cleaning the Screen Film Surface
After removing the double-sided tape at the Rear Cover (included
in the Stand), attach the rear cover while aligning it to the upper
end of the board attachment. Then, attach the rivets and the
poly-sliders (included in the Stand).
in the Stand), attach the rear cover while aligning it to the upper
end of the board attachment. Then, attach the rivets and the
poly-sliders (included in the Stand).
Gently wipe the screen film with a water-dampened cloth that has
been thoroughly wrung.
been thoroughly wrung.
Note:
1. Do not use thinner, benzine or cleaners containing abra-
sives, as this may result in discoloration.
2. Do not wipe the screen film with a dry cloth. (Doing so
can generate a static charge.)
Click on the first or last page to see other UB-5365 / UB-5865 (serv.man2) service manuals if exist.