Panasonic UB-5365 / UB-5865 (serv.man2) Service Manual ▷ View online
33
4.7.
Installing the Thermal Transfer Film
(1) Connect the Power Cord (PW) to the outlet.
(2) Pull out the insulation sheet from the battery holder.
(3) Press the "Power Key", then set the current time.
(Refer to the Operating Instructions for details on setting the
current time.)
current time.)
Note:
When the power is turned on for the first time, the current
time needs to be set.
time needs to be set.
At first, the default setting of the lower 2 digits of
Christian year, month or day (depending on the
destination) is displayed. For example "01" ("12" for
China) is displayed.
Christian year, month or day (depending on the
destination) is displayed. For example "01" ("12" for
China) is displayed.
(4) Push down the Printer Open Lever to open the Printer Door.
Note:
Check that the display on the Display Window changes to
U -> 14 -> U -> 14 ->......
U -> 14 -> U -> 14 ->......
34
(5) Place the Thermal Transfer Film (F).
35
(6) Close the Printer Door.
36
4.8.
Operation Check after Installation
Check that the Panarboard operates correctly by the following operation after installation.
(1) Open the paper cover and set the copy paper.
(2) Close the paper cover.
Note:
Check that the display on the Display Window is "1".
(3) Press the "Advance Key" to move the screen from right to
left.
Note:
Check that the screen moves smoothly with no abnormal
sound.
sound.
(4) Draw a line on the screen with the marker as shown in the fig-
ure.
(5) Press the "Multi-Copy/Stop Key" once.
Note:
Check that the display on the Display Window is "2".
(6) Press the "Copy Key" to copy and check the printed results.
Click on the first or last page to see other UB-5365 / UB-5865 (serv.man2) service manuals if exist.