Panasonic KV-SS905C Service Manual ▷ View online
2 SPECIFICATIONS
Items
Specifications
Scanner
Scanning face
Duplex
Sensor type
Front side: 3-line (R, G, B) color CCD
Back side: 3-line (R, G, B) color CCD
Back side: 3-line (R, G, B) color CCD
Readout speed
Simplex scanning
Approx. 98 (Binary) / 97 (JPEG) ppm. *1
Duplex scanning
Approx. 174 (Binary) / 174 (JPEG) ipm. *1
Resolution
Monochrome scanning
100-600 dpi (1 dpi step)
Color scanning
100-400 dpi (1 dpi step)
Multi Stream
TM
scanning
Binary 300dpi, Color 150dpi
Main-scanning direction and sub-scanning direction are same resolution.
Image output
Binary, Grayscale, Color, Multi-stream (Binary and Color)
Tonal gradation
Dither (64 step gradation)
Error diffusion (64 step gradation)
Error diffusion (64 step gradation)
Image control
Image emphasis, Automatic threshold, Dynamic threshold, Automatic separation, Multi-Color
dropout (Red, Green, Blue), Mirror image, Reverse image, Noise reduction
dropout (Red, Green, Blue), Mirror image, Reverse image, Noise reduction
Other functions
Patch code detection (Kodak patch 2, 3, T, Control sheet), Double feed detection
Paper
Size
48×70 to 298×420 mm (1.9”×2.75” to 11.7”×17”)
Weight
Single paper feed: 30 to 157g/m
2
(8 to 42 lbs.)
Continuous paper feed: 50 to 157 g/m
2
(13 to 42 lbs.)
Business card : Thicker than 127g/m
2
(34lbs)
Amount of Memory
64MB Standard (SO DIMM)
1 DIMM Slot for an additional memory
1 DIMM Slot for an additional memory
Power requirement
AC 100-120 V, 50/60 Hz
AC 220-240 V, 50/60 Hz
AC 220-240 V, 50/60 Hz
Power consumption
Scanning
3.0A (100-120V), 1.5A (220-240V)
Stand-by
0.7A (100-120V), 0.5A (220-240V)
Sleep
0.1A (100-120V), 0.06A (220-240V)
Environment
Operating
Temperature
15 to 30°C (59°F to 86°F)
Humidity
30%RH to 80%RH
Storage
Temperature
0 to 35°C (32°F to 95°F)
Humidity
10%RH to 80%RH
Unit
Dimensions
(Width×Depth×Height)
(Width×Depth×Height)
627×546×415 mm (24.7×21.5×16.3in.)
Weight
52 kgf (114.4lbs)
Accessories
Installation manual, Maintenance manual, AC cable, Blower, Cleaning paper, CD (ISIS driver,
TWAIN driver, Capture software (RTIV), Operation manual, P.I.E. manual, RTIV manual
Control sheet images)
TWAIN driver, Capture software (RTIV), Operation manual, P.I.E. manual, RTIV manual
Control sheet images)
Option
Roller exchange kit (KV-SS012), Roller cleaning paper (KV-SS03), Post-Imprinter (KV-SS05),
Ink cartridge (KV-SS06), Lamp Module (Front) (KV-SS052), Lamp Module (Back) (KV-SS053)
Ink cartridge (KV-SS06), Lamp Module (Front) (KV-SS052), Lamp Module (Back) (KV-SS053)
Note
*1 : These values depend on the following scanning conditions.
··
Multi Stream
TM
is TM of Pixel Translations (a division of Action Point, Inc.).
5
KV-SS905C
3 COMPONENT IDENTIFICATION
6
KV-SS905C
4 INSTALLATION
4.1. Minimum Space Requirements
Be sure to maintain the recommended space requirements for proper ventilation.
4.2. Installing the Lamp
(1) Open the Lamp Door.
(2) Insert the Front Side Lamp Module in the Front Side Lamp
Module Slot until the “click” is heard.
(3) Insert the Back Side Lamp Module in the Back Side Lamp
Module Slot until the “click” is heard.
(4) Connect each Lamp Cable to each connector.
(5) Close the Lamp Door.
7
KV-SS905C
4.3. Installing the Exit Stopper
(1) Position the Exit Stopper against the Document Width
Scale. (Secure the guides in place.)
··
Use the Exit Stopper when needed.
4.4. Installing the Exit Tray Stopper
(1) Squeeze the ends of the Exit Tray Stopper metal guides
slightly together, and insert them into the Stopper Slots of
the Exit Tray. Then pull up the plastic part of Exit Tray
Stopper. (Install the Exit Tray Stopper in the sequence of
(1) through (3).)
the Exit Tray. Then pull up the plastic part of Exit Tray
Stopper. (Install the Exit Tray Stopper in the sequence of
(1) through (3).)
4.5. DIMM Module Extension
A maximum of 256MB extended memory may be required depending on the combination of the paper size, resolution and gray
scale mode.To determine how much extended memory is required, refer to the section 4.6 “Additional Memory Size each
scanning mode (MB)”.
scale mode.To determine how much extended memory is required, refer to the section 4.6 “Additional Memory Size each
scanning mode (MB)”.
* Recommended DIMM
··
JEDEC-standard 168pin, dual in-line memory module (DIMM)
··
Non buffered
··
Single +3.3V±0.3V power supply
··
Frequency/CAS Latency : 100MHz/CL=2, 133MHz/CL=2, 133MHz/CL=3
··
64MB, 128MB or 256MB may be used.
(Reference) DIMM module which has been evaluated using this scanner
··
Manufacturer: DELKIN DEVICES
1. Model No.: DM168-064Y3Q488-10S2P (64MB)
2. Model No.: DM168-064Y3Q446-10D2P (64MB)
3. Model No.: DM168-128Y3Q448-10D4P (128MB)
Note
Originally, I/F Board (SCSI Board) has 64MB memory as the standard memory.
8
KV-SS905C
Click on the first or last page to see other KV-SS905C service manuals if exist.