Panasonic KV-SS905C Service Manual ▷ View online
(6) Install the new Paper Feed Roller Module with its gear to
the right.
Note
··
Attach the bearings at both ends of the Paper
Feed Roller Module into the guide grooves of the
chassis in the Scanner.
Feed Roller Module into the guide grooves of the
chassis in the Scanner.
··
Insert the Paper Feed Roller Cover into the Paper
Feed Roller Hole before attaching the bearing
into the grooves of the chassis.
Feed Roller Hole before attaching the bearing
into the grooves of the chassis.
(7) Push up the Green Levers at both ends in the direction of
the arrow until they click into position.
33
KV-SS905C
(8) Close the Front Door.
Note
Push the Front Door down slowly until it clicks into
position.
position.
7.5.2. Replacing the Retard Roller Module
(1) Turn the power off.
(2) Using your hand, pull the Front Door Release towards you.
Note
The Front Door now opens slowly.
(3) Use your fingers to pull the Retard Roller Door toward you.
34
KV-SS905C
(4) Use your fingers to pull up the Retard Roller Module in the
direction of the arrow.
(5) Take out the Retard Roller Module in the “Roller Exchange
Kit (KV-SS012)”.
(6) Install the new Retard Roller Module with the groove of its
shaft on the right and match it to the groove on the right
side of the metal holder.
side of the metal holder.
(7) Close the Retard Roller Door.
35
KV-SS905C
(8) Close the Front Door.
Note
··
Push down the Front Door slowly until it clicks
into place.
into place.
7.5.3. Replacing the Retard Pad
(1) Turn the power off.
(2) Using your hand, pull the Front Door Release towards you.
··
The Front Door now opens slowly.
(3) Using your fingers, open the Retard Roller Cover.
36
KV-SS905C
Click on the first or last page to see other KV-SS905C service manuals if exist.