Panasonic KV-SS905C Service Manual ▷ View online
8.2.3. Left Side Panel
(1) Remove the 2 screws.
(2) Slide the Left Side Panel to backward [approx. 1cm (0.5”)]
(in the direction of the arrow (2)), while bending the panel in
the direction of the arrow (1)) to avoid contacting to the
Pointer Lever.
the direction of the arrow (1)) to avoid contacting to the
Pointer Lever.
(3) Lift and remove the Left Side Panel.
8.2.4. Left Front Panel
(1) Remove the Left Side Panel. (See 8.2.3)
(2) Remove the 3 screws.
(3) Slide the Left Front Panel toward the front of the unit to
remove.
8.2.5. Back Panel
(1) Remove the 11 screws.
(2) Pull the Back Panel toward the back of the unit to remove.
41
KV-SS905C
8.2.6. Hopper Plate
(1) Turn on the power and press Hopper 3 key to set the
hopper to 1 page setting position.
(2) Turn off the power.
(3) Open the Front Door.
(4) Remove the 2 screws.
(5) Pull the front side of the Hopper Plate towards the front of
the unit.
Note
When removing the Hopper Plate, be careful not to
tear the flexible cable attached to the plate.
tear the flexible cable attached to the plate.
(6) Disconnect the CN6 on the HOPPER [CONNECTOR]
Board to remove the Hopper Plate.
8.2.7. Exit Slot Cover, Stacker Bottom Cover
(1) Remove the 2 screws (A) and remove the Exit Slot Cover.
(2) Pull the Exit Tray Stopper toward the front of the unit to
remove it.
42
KV-SS905C
(3) Remove the 2 screws (B).
(4) Pull the Exit Tray to the front of the unit and lift to remove.
(5) Open the Front Door and remove the 2 screws (C).
(6) Remove the Stacker Bottom Cover.
8.2.8. Post Imprinter Door
(1) Open the Post Imprinter Door.
(2) Lift up the Post Imprinter Door to remove.
8.2.9. Back Door Cover
(1) Remove the 2 screws.
43
KV-SS905C
(2) Spread the 2 claws of right-and-left both sides toward the
outside.
8.2.10. Top Cover
(1) Remove Right Side Panel. (See 8.2.1)
(2) Remove Left Side Panel. (See 8.2.3)
(3) Remove the 4 screws and 2 washers.
Note
··
Be careful not to drop washer inside of the unit.
··
When removing a right side screw, insert a driver
from the service hole on Board Box and remove
it.
from the service hole on Board Box and remove
it.
(4) Remover the Top Cover.
44
KV-SS905C
Click on the first or last page to see other KV-SS905C service manuals if exist.