Panasonic KV-SS905C Service Manual ▷ View online
(6) Use the accessory Roller Cleaning Paper to wipe off the dirt
on the surfaces of the six rubber of the Drive Rollers.
(7) Use the accessory Roller Cleaning Paper to clean the
surface of six Free Rollers. Wipe all the way around them
proceeding from one end to the other in the directions of the
arrows shown in the figure to the right. Then close the Front
Door.
proceeding from one end to the other in the directions of the
arrows shown in the figure to the right. Then close the Front
Door.
(8) After opening the Back Door by pulling the Back Door
release, use the accessory Roller Cleaning Paper to wipe
the surfaces of the Conveyor Rollers, Straight Exit Roller,
and Free Rollers all the way around them proceeding from
one end to the other in the directions of the arrows shown
in the figure to the right. Then close the Back Door.
the surfaces of the Conveyor Rollers, Straight Exit Roller,
and Free Rollers all the way around them proceeding from
one end to the other in the directions of the arrows shown
in the figure to the right. Then close the Back Door.
(9) After cleaning, clear warning for “Clean Roller” on LCD by
operating Clear warning for “Clean Roller” according to
9.5.4.2..
9.5.4.2..
29
KV-SS905C
7.3. Cleaning the scanning section glass and reference plate
(1) Turn the power off.
(2) Using your hand, pull the Front Door Release towards you.
Note 1.
The Front Door now opens slowly.
Note 2.
After scanning operations, the surfaces around the
scanning section glasses and the reference plates
may be hot. Wait for them to cool before cleaning
inside the scanner.
scanning section glasses and the reference plates
may be hot. Wait for them to cool before cleaning
inside the scanner.
(3) Clean the Scanning Section Glasses and Reference Plates
using the accessory Roller Cleaning Paper.
(4) Close the Front Door.
Note for the Roller Cleaning Paper
Open the bag by the dotted line and take out the Roller Cleaning Paper.
··
If the opened bag is left open for a long period of time before using it, the alcohol will evaporate. Please use the
Roller Cleaning Paper immediately after opening the bag.
Roller Cleaning Paper immediately after opening the bag.
The Roller Cleaning Paper (Model No. KV-SS03) is available via sales route.
30
KV-SS905C
7.4. Cleaning Sensors
(1) Turn the power off.
(2) Using your hand, pull the Front Door Release towards you.
Note
The Front Door now opens slowly.
(3) Remove the dirt on the Document Sensors, Edge Limit
Sensors, Black Sheets, Double Feed Detector, and Paper
Detector with the included blower.
Detector with the included blower.
(4) Open the Back Door by pulling the Back Door Release, and
open the Post Imprinter Door.
(5) Also remove the dirt on the Document Sensors and Paper
Jam Sensor with included blower.
How to clean the Document Sensor, Double Feed Detector or Paper Detector.
Remove the brush and blow off the dirt through each hole of the sensors and detectors.
31
KV-SS905C
7.5. Replacing Limited Life Parts
7.5.1. Replacing the Paper Feed Roller Module
(1) Turn the power off.
(2) Using your hand, pull the Front Door Release towards you.
Note
The Front Door now opens slowly.
(3) Use your fingers to push down the two Green Levers at
both ends of the Paper Feed Roller Module.
Note
When moving the Green Levers, do not apply
pressure in any other direction than the arrows.
Otherwise, they may be broken.
pressure in any other direction than the arrows.
Otherwise, they may be broken.
(4) Remove the Paper Feed Roller Module by removing its
bearing from the guide groove of the Chassis in the
Scanner.
Scanner.
(5) Open the optional “Roller Exchange Kit” (KV-SS012), and
take out the Paper Feed Roller Module.
32
KV-SS905C
Click on the first or last page to see other KV-SS905C service manuals if exist.