Panasonic KV-SS905C Service Manual ▷ View online
8.3.12. Conveyor Belt 2
(1) Remove the Left Side Panel. (See 8.2.3)
(2) Loosen the 2 screws (A) and release the Tension Pulley.
(3) Remove the 2 screws (B) and remove the Gear-pully.
(4) Remove the Conveyor Belt 2.
Reassembling Note
Adjust belt tension according to instruction in the
BELT LAYOUT Label pasted inside of the Left Side
Panel.
BELT LAYOUT Label pasted inside of the Left Side
Panel.
8.3.13. Conveyor Belt 1
(1) Remove the Left Side Panel. (See 8.2.3)
(2) Remove the 2 screws (A).
(3) Remove the Gear-Pully
(4) Loosen the 2 screws (B) and release the Tension Pulley.
(5) Remove the Conveyor Belt 1.
Reassembling Note
Adjust belt tension according to instruction in the
BELT LAYOUT Label pasted inside of the Left Side
Panel.
BELT LAYOUT Label pasted inside of the Left Side
Panel.
53
KV-SS905C
8.3.14. Paper Feed Belt
(1) Remove the Right Front Panel. (See 8.2.2)
(2) Remove the Board Box & Power Box. (See 8.3.3)
(3) Loosen the 2 screws and release the Tension Pulley.
(4) Remove the Paper Feed Belt.
8.3.15. Pointer
(1) Remove the Left Side Panel. (See 8.2.3)
(2) Remove the 3 screws (B) to remove the Side Panel Stay 2.
(3) Remove the screw (A) of the Pointer Shaft.
54
KV-SS905C
(4) Remove the E-ring in the right of the Pointer Shaft.
Note
The E-ring is inside of the Main Chassis.
(5) Pull out the Pointer in the direction of the arrow and remove
it.
8.3.16. Drive Rollers (1) - (3)
(1) Remove the Conveyor Belt 2. (See 8.3.12)
(2) Remove the Hopper Plate. (See 8.2.6)
(3) Open the Front Door.
(4) Remove the 4 screws and Conveyor Bottom (1).
(5) Lift the Conveyor Bottom (4) and pull out toward the front of
the unit to remove.
55
KV-SS905C
(6) Unhook the Drive Rollers from the notching hole of chassis
and remove it.
8.3.17. Conveyor Rollers (1) - (4)
(1) Remove the Conveyor Belt 1. (See 8.3.13)
(2) Open the Back Door.
(3) Remove the 6 screws and Conveyor Upper (6).
Reassembling Note
Frange of the rollers are as shown below. (Be
careful not to confound the rollers with the others).
careful not to confound the rollers with the others).
(4) Unhook the Conveyor Rollers from the notching hole of
chassis and remove it.
56
KV-SS905C
Click on the first or last page to see other KV-SS905C service manuals if exist.