Panasonic KV-SS905C / KV-SS905CCN Service Manual / Supplement ▷ View online
6 "SECTION 8 DISASSEMBLY INSTRUCTIONS"
6.1.
"Section 8.2.3 Left Side Panel"
(1)
Remove the 2 screws.
(2)
Slide the Left Side Panel to backward [approx. 1cm (0.5”)]
(in the direction of the arrow (2)), while bending the panel in
the direction of the arrow (1)) to avoid contacting to the
Pointer Lever.
(in the direction of the arrow (2)), while bending the panel in
the direction of the arrow (1)) to avoid contacting to the
Pointer Lever.
(3)
Lift and remove the Left Side Panel.
6.2.
"Section 8.2.10 Top Cover"
(1)
Remove Right Side Panel. (See 8.2.1)
(2)
Remove Left Side Panel. (See 8.2.3)
(3)
Remove the 4 screws and 2 washers.
Note
· Be careful not to drop washer inside of the unit.
· When removing a right side screw, insert a driver
· When removing a right side screw, insert a driver
from the service hole on Board Box and remove
it.
it.
(4)
Remover the Top Cover.
6.3.
"Section 8.3.3 Board Box & Power Box"
(1)
Remove the Right Front Panel. (See 8.2.2)
(2)
Remove MAIN, I/F, and DRIVE Boards. (See 8.4.2 - 8.4.4)
(3)
Disconnect
all connectors on the MOTHER Board.
(4)
Remove the connectors clamped on the Board box & Power
Box.
Box.
(5)
Remove 3 screws (A).
17
KV-SS905C / KV-SS905CCN
(6)
Remove the 4 screws (B) and remove the Board Box &
Power Box.
Power Box.
18
KV-SS905C / KV-SS905CCN
6.4.
"Section 8.3.12 Conveyor Belt 2"
(1)
Remove the Left Side Panel. (See 8.2.3)
(2)
Loosen the 2 screws (A) and release the Tension Pulley.
(3)
Remove the 2 screws (B) and remove the Gear-pulley.
(4)
Remove the 3 screws (C) and remove the Side Panel
Stay2.
(5)
Remove the Conveyor Belt 2.
Reassembling Note
Adjust belt tension according to instruction in the
BELT LAYOUT Label pasted inside of the Left Side
Panel.
BELT LAYOUT Label pasted inside of the Left Side
Panel.
19
KV-SS905C / KV-SS905CCN
6.5.
"Section 8.3.13 Conveyor Belt 1"
(1)
Remove the Left Side Panel. (See 8.2.3)
(2)
Remove the 2 screws (A).
(3)
Remove the Gear-Pulley
(4)
Loosen the 2 screws (B) and release the Tension Pulley.
(5)
Remove the 3 screws (C) and remove the Side Panel
Stay2.
(6)
Remove the Conveyor Belt 1.
Reassembling Note
Adjust belt tension according to instruction in the
BELT LAYOUT Label pasted inside of the Left Side
Panel.
BELT LAYOUT Label pasted inside of the Left Side
Panel.
6.6.
"Section 8.3.14 Paper Feed Belt"
(1)
Remove the Right Front Panel. (See 8.2.2)
(2)
Remove the Board Box & Power Box. (See 8.3.3)
(3)
Loosen the 2 screws and release the Tension Pulley.
(4)
Remove the Spring.
(5)
Remove the Paper Feed Belt.
20
KV-SS905C / KV-SS905CCN
Click on the first or last page to see other KV-SS905C / KV-SS905CCN service manuals if exist.