Panasonic KV-SS905C / KV-SS905CCN Service Manual / Supplement ▷ View online
(4)
Use your fingers to pull up the Retard Roller Module in the
direction of the arrow.
direction of the arrow.
(5)
Take out the Retard Roller Module in the “Roller Exchange
Kit (KV-SS012)”.
Kit (KV-SS012)”.
(6)
Install the new Retard Roller Module with the groove of its
shaft on the right and match it to the groove on the right
side of the metal holder.
shaft on the right and match it to the groove on the right
side of the metal holder.
(7)
Close the Retard Roller Door.
13
KV-SS905C / KV-SS905CCN
(8)
Close the Front Door.
Note
· Push down the Front Door slowly until it clicks
into place.
5.3.
"Section 7.5.3 Replacing the Retard Pad"
(1)
Turn the power off.
(2)
Using your hand, pull the Front Door Release towards you.
· The Front Door now opens slowly.
· The Front Door now opens slowly.
(3)
Using your fingers, open the Retard Roller Door .
14
KV-SS905C / KV-SS905CCN
(4)
Pull and remove the Retard Pad in the direction of the
arrow.
arrow.
(5)
Open the "Roller Exchange Kit" (KV-SS012), and take out
the new Retard Pad.
the new Retard Pad.
(6)
Install the new Retard Pad in the direction of the arrow until
it is locked.
it is locked.
(7)
Close the Retard Roller Door .
15
KV-SS905C / KV-SS905CCN
(8)
Close the Front Door.
Note
· Push down the Front Door slowly until it clicks
into place.
· After replacing the Paper Feed Roller Module,
the Retard Roller Module, and the Retard Pad,
clear warning for “Replace Roller”, according to
9.5.4.2..
clear warning for “Replace Roller”, according to
9.5.4.2..
16
KV-SS905C / KV-SS905CCN
Click on the first or last page to see other KV-SS905C / KV-SS905CCN service manuals if exist.