Panasonic KV-S3105C / KV-S3085 (serv.man3) Service Manual ▷ View online
1.4. About Lead Free Solder (PbF: Pb free)
Note
· In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or
solder that contains lead.
· We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin
(Sn), Silver (Ag), and Copper (Cu).
· This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service
and repair work we suggest using the same type of solder although, with some precautions, standard Pb solder can
also be used.
also be used.
Distinction of PbF PCB
· PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB.
Caution
· PbF solder has a melting point that is 50 ° - 70 °F, (30 ° - 40 °C) higher than Pb solder.
Please use a soldering iron with temperature control and adjust it to 700 ° ± 20 °F (370 ° ± 10 °C). In case of using
high temperature soldering iron, please be careful not to heat too long.
high temperature soldering iron, please be careful not to heat too long.
· PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100 °F, (600 °C).
· If you must use Pb solder on a PCB manufactured using PbF solder, remove as much of the original PbF solder as
· If you must use Pb solder on a PCB manufactured using PbF solder, remove as much of the original PbF solder as
possible and be sure that any remaining is melted prior to applying the Pb solder.
· When applying PbF solder to double layered boards, please check the component side for excess which may flow
onto the opposite side (See figure, below)
1.4.1. Suggested Pb free solder
We recommend you to use the following solder when you re-solder components for repair. Before using other Pb free solder than
the following solder, be sure to confirm a solder maker you appoint has made license agreements to be required when using Pb
free solder legally.
the following solder, be sure to confirm a solder maker you appoint has made license agreements to be required when using Pb
free solder legally.
Supplier: Senju Metal Industry Co., Ltd. (http://www.senju-m.co.jp)
Part Description in Senju: EcoSolder RMA02 P3 M705 Series
5
KV-S3105CSERIES / KV-S3085SERIES
2 SPECIFICATIONS
Item
Model No.
KV-S3105C Series
*1
KV-S3085 Series
*2
Scanner
Scanning face
Duplex
Scanning method
Sheet feed type
CCD (Front and back sides)
Selectable back ground color (Black or White)
CCD (Front and back sides)
Selectable back ground color (Black or White)
Readout speed
Binary A4 200 dpi portrait
Simplex: 100 ppm
Duplex: 180 ipm
Duplex: 180 ipm
JPEG Color A4 200 dpi portrait
Simplex: 100 ppm
Duplex: 174 ipm
Duplex: 174 ipm
Binary A4 200 dpi portrait
Simplex: 85 ppm
Duplex: 160 ipm
Duplex: 160 ipm
Resolution
400 dpi (Optional resolution)
Image output
Binary
8 bit grayscale
24 bit color
MultiStream (Binary+8 bit grayscale or
Binary+24 bit color)
8 bit grayscale
24 bit color
MultiStream (Binary+8 bit grayscale or
Binary+24 bit color)
Binary
8 bit grayscale
24 bit color (Require option)
MultiStream [Binary+8 bit grayscale or
Binary+24 bit color (Require option)]
8 bit grayscale
24 bit color (Require option)
MultiStream [Binary+8 bit grayscale or
Binary+24 bit color (Require option)]
Image Processing
Image emphasis, Dither (64 step gradation), Error diffusion (64 step gradation),
Dynamic threshold, Automatic separation,
Multi-Color dropout, Mirror image, Noise reduction
Dynamic threshold, Automatic separation,
Multi-Color dropout, Mirror image, Noise reduction
Other function
Patch code detection (Kodak patch 2,3,T) Control sheet
Paper
Size
Image Size (Maximum)
Width: 302 mm (11.7 in.)
Length: 2540 mm (100 in.)
Length: 2540 mm (100 in.)
Feeding Size
Minimum
Width: 48 mm (1.9 in.)
Length: 70 mm (2.8 in.)
Length: 70 mm (2.8 in.)
Maximum
Width: 297 mm (11.7 in.)
Length: 432 mm (17 in.)
Length: 432 mm (17 in.)
Thickness
Single paper feed: 0.04-0.2 mm (1.6-7.9 mils)
Continuous feed: 0.06-0.2 mm (2.4-7.9 mils)
Continuous feed: 0.06-0.2 mm (2.4-7.9 mils)
Note: 1 mils=1/1000 in.
Weight
Single paper feed: 30-157 g/m
2
(8-42 lb.)
Continuous feed: 50-157 g/m
2
(13-42 lb.)
Business card is thicker than 127 g/m
2
(34 lb.)
Note: 1 lb.=3.75 g/m
2
Detection
Empty, Size, Jam, Skew, and Double-feed detections
Interface
Ultra wide SCSI (68 pin) / USB 2.0 Multi Interface
Hopper capacity
1000 sheets: 64 g/m
2
(17 lb.)
Unit
External dimensions
(Width×Depth×Height)
(Width×Depth×Height)
627×546×415 mm (24.7×21.5×16.4 in.)
Weight
52 kgf (114.4 lbs.)
Image memory (Standard)
256 MB
64 MB
External image memory
DIMM port: 1 slot
Power requirement
AC 100-120 V, 50/60 Hz
AC 220-240 V, 50/60 Hz
AC 220-240 V, 50/60 Hz
Power
consumption
consumption
Maximum
(Scanning)
(Scanning)
3.0 A (AC 100-120 V)
1.5 A (AC 220-240 V)
1.5 A (AC 220-240 V)
Minimum
(Standby)
(Standby)
0.7 A (AC 100-120 V)
0.5 A (AC 220-240 V)
0.5 A (AC 220-240 V)
Sleep mode
10 W (AC 100-120 V)
11 W (AC 220-240 V)
11 W (AC 220-240 V)
Environment
Operating temperature and
Humidity
Humidity
Temperature: 15 °C to 30 °C (59 °F to 86 °F)
Humidity: 20 % to 80 % RH
Humidity: 20 % to 80 % RH
Storage temperature and
Humidity
Humidity
Temperature: 0 °C to 35 °C (32 °F to 95 °F)
Humidity: 10 % to 80 % RH
Humidity: 10 % to 80 % RH
Accessories
Installation manual, Maintenance manual, AC Cord, USB 2.0 Cable, Blower, Cleaning paper,
CD-ROM [ISIS Driver, Capture software (RTIV), Operation manual, P.I.E. manual,
RTIV manual, Control sheet images], Shading paper
CD-ROM [ISIS Driver, Capture software (RTIV), Operation manual, P.I.E. manual,
RTIV manual, Control sheet images], Shading paper
PbF (Pb Free)
Applied to PCB assemblies CONTROL, INTERFACE, MOTHER, CCD, DRIVE, PANEL,
SIZE, HOPPER [CONNECTOR], HOPPER [POSITION], HOPPER [ANGLE], POINTER,
EXIT [FRONT], POST IMPRINTER DOOR, RELAY [LOWER], RELAY [UPPER], SKEW (L),
SKEW (R), JAM, RETARD [POSITION], FAN RELAY 1, FAN RELAY 2, LCD, and POWER
Boards for KV-S3105C Series and KV-S3085 Series.
SIZE, HOPPER [CONNECTOR], HOPPER [POSITION], HOPPER [ANGLE], POINTER,
EXIT [FRONT], POST IMPRINTER DOOR, RELAY [LOWER], RELAY [UPPER], SKEW (L),
SKEW (R), JAM, RETARD [POSITION], FAN RELAY 1, FAN RELAY 2, LCD, and POWER
Boards for KV-S3105C Series and KV-S3085 Series.
Note: Distinction of PbF PCB
PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB.
6
KV-S3105CSERIES / KV-S3085SERIES
Item
Model No.
KV-S3105C Series
*1
KV-S3085 Series
*2
Option
Roller Exchange Kit (KV-SS026)
Roller Exchange Kit for thin paper (
Roller Exchange Kit for thin paper (
*3
KV-SS027)
Imprinter Unit (KV-SS028), Ink cartridge (KV-SS021)
Roller cleaning paper (KV-SS03)
Roller cleaning paper (KV-SS03)
—
Color upgrade kit (KV-SS029)
Note:
*1
: KV-S3105C Series
For U.S.A. and Europe: KV-S3105C
For China: KV-S3105CCN
SERIAL No. shown on the name plate on each Scanner will distinguish the destinations for each area as follows.
1. SERIAL No. for U.S.A. and Europe
→ 807 xxxxx
2. SERIAL No. for China
→ 825 xxxxx
(x: Don’t care)
*2
: KV-S3085 Series
For U.S.A. and Europe: KV-S3085
SERIAL No. shown on the name plate on each Scanner will distinguish the destinations for each area as follows.
SERIAL No. for U.S.A. and Europe
→ 813 xxxxx
(x: Don’t care)
*3
: KV-SS027
This kit will be effective in case thin paper’s (less than 50 g/m
2
) jam frequently occurs at the paper-feed block
attached as the standard.
7
KV-S3105CSERIES / KV-S3085SERIES
3 COMPONENT IDENTIFICATION
8
KV-S3105CSERIES / KV-S3085SERIES
Click on the first or last page to see other KV-S3105C / KV-S3085 (serv.man3) service manuals if exist.